OMEGALUX® SRF cable is ideal for keeping metal and plastic pipes warm in commercial construction,
institutional buildings and some industrial freeze protection applications. SRF cable is
constructed of a self-regulating polymer core that varies its output along its entire length, saving
energy and eliminating hot spots along the pipe. The parallel construction makes it easier to
install than zone or series types of cable since it can be cut to length at any point on the pipe.
It can be overlapped without overheating the cable.
Output at Rated Voltage at 50°F
Tinned Copper Braid Model No.
Tinned Copper Braid and TPR Overcoat (-CR) Model No.
Minimum length of heating cable is 25 ft. See pages B-24 to B-28 for heat cable accessories and controls.
MOST POPULAR MODELS HIGHLIGHTED!
† All dollar amounts on this site are shown in US currency.
Part Number Builder
Select 3 for 3 Watt per foot heating cable 5 for 5 Watt per foot heating cable 8 for 8 Watt per foot heating cable
Select 1 for 120 Volts 2 for 208 to 277 Volts
Select C for Tinned-Copper Braid CR for Tinned-Copper Braid and TPR Overcoat
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.