Enclosure Heaters |
| SRFE Series |
|
 |
|
|
|
 |
SRFE series enclosure heaters feature an etched foil element encapsulated between layers of
fiberglass reinforced silicone rubber, and are factory vulcanized to an aluminum mounting plate.
Mounting plates come with 7/16" (11 mm) holes for mounting to subpanel or other mounting surface.
The built-in air sensing thermostat maintains the temperature within the enclosure to prevent freezing or
condensation. The SRFE enclosure heaters are mounted vertically or horizontally using the mounting
plate, however, optional temperature control is achieved when mounting the heater vertically.
Options for the SRFE series enclosure heaters include custom sizes and remote mounted
thermostats. Contact Engineering for more information.
| Model No. |
Length & Width inches (mm) |
Wattage |
Thermostat Setpoint |
| Opens |
Closes |
| SRFE-6 | 6 x 2.5 (152 x 64 mm) | 60 | none | none |
| SRFE-6-40 | 6 x 2.5 (152 x 64 mm) | 60 | 60°F ±5 | 40°F ±5 |
| SRFE-6-105 | 6 x 2.5 (152 x 64 mm) | 60 | 140°F ±5 | 110°F ±5 |
| SRFE-6-150 | 6 x 2.5 (152 x 64 mm) | 60 | 180°F ±5 | 150°F ±5 |
| SRFE-12 | 12 x 2.5 (305 x 64 mm) | 120 | none | none |
| SRFE-12-40 | 12 x 2.5 (305 x 64 mm) | 120 | 60°F ±5 | 40°F ±5 |
| SRFE-12-105 | 12 x 2.5 (305 x 64 mm) | 120 | 140°F ±5 | 110°F ±5 |
| SRFE-12-150 | 12 x 2.5 (305 x 64 mm) | 120 | 180°F ±5 | 150°F ±5 |
|
| |
 |
|
 |
|
 |
† All dollar amounts on this site are shown in US currency.
Ordering Example: (1) SRFE-6-105 6" enclosure heater with 105°F setpoint integral thermostat, $104.00
|
|
 |
|
 |
|
 |
|
Keywords:Enclosure Heaters for Protection from Freezing or Condensation in Enclosures
|
Back to top
|