SV170 Series 2-way 316 SS
solenoid valves are internally
piloted. They feature 316 stainless
steel construction and FKM seal
material. The temperature range of
-10 to 138°C (14 to 280°F) and the
FKM O-ring make these valves ideal
for many aggressive liquids and
gases. A strain-relief connector
is supplied with each unit. A ½"
conduit plug is also available.
SPECIFICATIONS Mounting Position: Any (preferably with solenoid system upright) Maximum Process Temperature: -10 to 138°C (14 to 280°F) FKM O-ring Maximum Ambient Temperature: Coil dependent (see ratings on coils) Voltage Tolerance: ±10% AC, ±5% DC Opening Time (ms): Approximately 100 to 200 Closing Time (ms): Approximately 200 to 1200 Cycling Rate: Approximately 60 cpm Duty Cycle: Continuous (100%) Coil Molding Material: Black Polyphenylensulphide (Class H):
SV8COIL-115/60 HZ
SV8COIL-220/60 HZ Black Epoxy Resin (Class H):
All 14 W coils, NEMA 4 Coil Molding Material: Black Polyphenylensulphide (Class H):
SV8COIL-115/60 HZ
SV8COIL-220/60 HZ Black Epoxy Resin (Class H):
All 14 W coils, NEMA 4
† All dollar amounts on this site are shown in US currency.
Note: * Maximum operating pressure differential. † 8 W AC coils are standard on valves up to 1". †† 14 W DC coils are standard on valves larger than 1". Comes complete with operator’s manual, coil, and cable grip.