OMEGA-FLO® 2-way Zero Differential Solenoid Valves ½" to 2½" NPT |
| SV-350 |
|
 |
|
|
|
|
|
|
|
| • |
Normally Closed
|
| • |
Zero-Differential Pressure Ideal for Gravity Feed Processes
|
| • |
Available in Brass or Stainless Steel
|
| • |
Process Temperature Range to
130°C (266°F)
|
View related products - Valves
|
| |
|
|
|
 |
SV-350 Series 2-way solenoid valves are internally piloted valves with diaphragm and forced lifting which open fully from 0 PSI pressure differential. The valves feature brass or stainless steel body with high flow rates, FKM seal material, and a temperature range from -10 to 130°C (14 to 266°F). The valves are ideal for neutral media such as water, compressed air, and hydraulic oil (viscosity approx. 2.3 x 10 -4 ft 2 /sec). Electrical connection is by conduit plug.
SPECIFICATIONS
Mounting Position: Any (preferably with solenoid system upright)
Max Ambient Temp: 54°C (130°F)
Operating Voltage: 120 Vac
Voltage Tolerance: ±10% Power Consumption in
Warm State:
Opening Time (ms): 100 to 1000
Closing Time (ms): 700 to 4000 (switching times are measured using water and are dependent on valve orifice size and fluid pressure and viscosity)
Cycling Rate: Approx. 10 to 20 cpm
Duty Cycle: Continuous (100%)
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Comes complete with operator's manual.
* The SV-359 is not UL listed.
Ordering Example: (1) SV-354 3/4" NPT Stainless Steel valve, 5.8 Cv, $598
|
|
|
|
|
| |
|
Back to top
|
|
