Programmable Stepper Drive with Integrated Power Supply |
| Si3540 |
|
 |
|
|
|
|
$
1,045.00
Si3540
|
| • |
3.5 A, 40 Vdc
|
| • |
110/220 Vac Input, 50/60 Hz Switch Selectable
|
| • |
Microstepping 2000 to 50,800 Steps/Rev
|
| • |
Idle Current Reduction Software Selectable: 0, 25, 50, or 100%
|
| • |
Software Selectable Motor Current 0.2 to 3.5 A/Phase
|
| • |
Eight Optically Isolated Inputs 5 to 24 Vdc
|
| • |
Three Optically Isolated Outputs 12 to 24 Vdc, 100 mA max
|
| • |
One Optically Isolated Output 5V, Dedicated to Fault Out
|
| • |
Si Programming Software and Cable Included; Download, Store and Execute Programs
|
| • |
SCL Software Included; Send Commands and Execute in Real-Time
|
| • |
Mating Connectors Included
|
| • |
Sample Motion Programs Available by Request
|
|
View related products - Drives & Motors
|
|
|
|
|
The Si3540 is a programmable step motor drive/indexer packaged
in a rugged steel and aluminum enclosure. Integral power supply,
heat sink, mounting brackets, switch covers and connectors are included
with each Si3540. The Si3540 comes with all operating software necessary
to create a complete step motor-based motion control solution.
The Si3540 includes Applied Motion Products' Windows-based
Si Programmer™ software application for quick set up and ease of use.
Si Programmer™ is ideal for stand-alone operation. For users with software
development expertise, the Si3540 can also be used with Applied Motion's
Si™ Command Language (SCL). SCL allows for control of an Si drive, like
the Si3540, via serial commands sent from a host device such as a PC or
PLC. This permits the user to perform a variety of motion, I/O, and system
status tasks via a host serial device.
Multiple axis applications can be handled with the SiNet™ Hub
Programmer software, which gives you the ability to control up to 4 "Si" or "i"
drives, stepper and servo, from just one SiNet™ Hub 444. Not only can you
sequence up to four motors, but a SiNet™ Hub 444 also has access to the
inputs and outputs of all the drives connected to it, providing your program
with up to 32 inputs and 12 outputs. In addition, the Hub 444 provides 4 digital
inputs and 4 digital outputs of its own. You can also use Applied Motion's
MMI-01 to interface the drives with the machine operator.
Factory set to operate at 110 VAC input, the Si3540 can be set by
the user to operate at 220 VAC input by a simple switch selection.
Pluggable screw terminal blocks are provided for the I/O, motor,
and AC power input. Mating connectors, programming cable with computer
interface connector, as well as all operating software are provided with
each Si3540 drive.
The Si3540 is both CE and TUV compliant.
Learn more about stepper motors and drives:
Introduction to Stepper Motors and Drives
Si Programmer
Intended for use in stand-alone applications, Si (Simple Indexer) Programmer
provides quick, out-of-the-box use with an extremely friendly, point-and-click
graphical interface that does not require any software programming experience.
Once an Si program has been constructed and downloaded to the drive,
the program can be executed stand-alone at power-up or from an external trigger.
Constructing a program is accomplished through the use of instructions selected
in a point-and-click manner. Once an instruction is selected, a "fill in the blanks"
format is used to input parameters.
Constructing an Si program requires no prior programming experience nor does
it require learning a programming language. Si Programmer generates the actual
motion control program, based on user selected parameters, thereby eliminating
syntax errors. Once created, programs are easily downloaded, uploaded, saved
and printed.
Si Programmer also provides the capability to control digital inputs and outputs,
useful for interfacing with external equipment like PLCs, sensors, end-of-travel switches,
and more. Si Programmer has found success in all types of applications, from simple
linear actuator applications to complete machine control with operator interface
applications.
Click here to download Si Programmer for free:
Si Programmer software
Click here to download the Si Programmer user manual:
Si Programmer user manual
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Programming software, programming cable, and mating connectors are included. To see torque-speed curves for recommended motors, click on "Specs" above.
Ordering Example: (1) Si3540 Programmable step motor drive with AC power supply, (1) OMHT23-400 NEMA 23 stepper motor, 264oz-in holding torque, (1) OM-CONV-USB USB to RS-232 Interface Converter = $1220
|
|
|
|
|
| |
 |
|
|
|
|
 |
 |
 |
 |
Related Links -
Related Products
|
|
|
|
|
|
 |
|
|
|
Related Products
|
|
|
 |
HUB 444:
|
|
SiNET™ Multi-Axis Motion Control
|
|
|
|
 |
1240i:
|
|
Programmable Step Motor Indexer/Drive
|
|
|
|
 |
2035:
|
|
Stepper Motor Drive
|
|
|
|
 |
3540M:
|
|
Microstepping Motor Drives
|
|
|
|
 |
3540i:
|
|
Programmable Step Motor Indexer/Drive
|
|
|
|
 |
ST Series:
|
|
Performance Stepper Drives With Advanced Features And Control Options
|
|
|
|
 |
STAC6 Series:
|
|
High Performance Stepper Drives with Integrated Power Supply
|
|
|
|
|
|
|
 |
|
|
Keywords:Programmable Stepper Drive, step motor drive, bipolar drive, PWM amplifier, stand-alone operation, optoisolated inputs, microstepping, AC power, integrated power supply, idle current reduction, host commands, MMI, motion control
|
Back to top |
|
