For higher temperatures, choose Super OMEGACLAD® XL mineral insulated thermocouple
cable and our rugged transition joint probes, which are available in Type K and N
calibrations. See the highlighted section in the table.
Junction: (G)rounded, (E)xposed or
or (U)ngrounded. **Specify length in
inches: 6 for 150 mm (6 in.), 12
for 300 mm (12 in.), or 18 for 450 mm (18 in.).
Super OMEGACLAD® XL probes (highlighted in yellow) are also
available in N calibration; substitute NN for CA in Model
† All amounts shown in USD Note: Note: For a male straight M8 plug add "M8-S-M" to the model number and add $17 to the price, for a male straight M12 plug add "M12-S-M" to the model number and add $17 to the price. For a male right-angled M8 plug add "M8-R-M" to the model number and add $17 to the price, for a male right-angled M12 plug add "M12-S-M" to the model number and add $17 to the price. Ordering Example: (1) TJ36-CAXL-316U-12 Type K (Ungrounded Junction) Rugged Transition Joint Probe with Super OMEGACLAD® XL sheath 3/16 in. (4.5 mm) dia. and 12 in. (300 mm) length., $38.00
Part Number Builder
Build Your Part Number Below
Lead Wire Length select from: 36 for 36 inches(standard) CUSTOM for custom length in inches(whole number only from 37 to 600 inches)
Calibration select from: CA for Type K IC for Type J CP for Type T NN for Type N
Sheath Material select from: SS for 304 Stainless Steel IN for Inconel® 600 XL for Super OMEGACLAD® XL
Probe Diameter select from: 116 for 1/16 in. (1.5 mm) 18 for 1/8 in. (3 mm) 316 for 3/16 in. (4.5 mm) 14 for 1/4 in. (6 mm)
Junction Type select from: E for Exposed Tip G for Grounded Tip U for Ungrounded Tip
Probe Length select from: 6 for 6 in. (150 mm) 12 for 12 in. (300 mm) 18 for 18 in. (450 mm) CUSTOM for custom length in inches(whole numbers only from 2 to 120 inches)
Note: All combinations may not be valid, check spec sheet for valid part numbers.