FEATURES
Tubular heating elements are brazed
into a junction box. All wetted parts of
TLO & KTLO Series heaters are
steel. Sludge legs (to keep heated
portion of the unit off the bottom of
the tank) are standard.
APPLICATIONS
Medium weight oils, alkali, soaking
cleaners, degreasing solutions,
caustics, solvent type oils, heat transfer
fluids.
CAUTION AND WARNING!
Fire and electrical shock may result
if products are used improperly or
installed or used by non-qualified
personnel. See inside back cover
for additional warnings.
* Designate voltage, i.e. insert 240 for 240 V or 480 for 480 V.
** Add the suffix “3P” to the model number for 3 phase power.
Optional thermostat kits are available to fit into heater terminal box.
† All dollar amounts on this site are shown in US currency.
Note: Model TLO-2 and KTLO-2 Series are available in 4 kW units. contact OMEGALUX® for details.
Part Number Builder
Option Descriptions
(1)
Model
Select TLO for Model TLO KTLO for Model KTLO
(2)
Number of Elements
Select 2 for 2 Elements 3 for 3 Elements
(3)
Wattage
Select 20 for 2 kW 40 for 4 kW 45 for 4.5 kW 50 for 5 kW 60 for 6 kW 75 for 7.5 kW 90 for 9 kW 10 for 10 kW
(4)
Riser
Select 36 for 36 in. 48 for 48 in.
(5)
Voltage
Select 120V for 120 V 240V for 240 V 480V for 480 V
(6)
Power
Select Nothing(leave field blank) /3P for 3 phase power
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
Keywords:Over The Side Immersion Heaters for Medium Oils
