FEATURES
These over-the -side immersion heaters are designed for installing in
the top of a tank with the heated portion directly immersed along the
side or at the bottom. This provides easy removal of the heater and
ample working space inside the tank.
CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or
installed or used by non-qualified personnel. See inside back cover
for additional warnings.
* Designate voltage, i.e. insert 240 for 240 for 480V for 480 V.
** Add the suffix “3P” to the model number for 3 phase power.
Optional thermostat kits are available to fit into heater terminal box.
† All dollar amounts on this site are shown in US currency.
Part Number Builder
Option Descriptions
(1)
Model
Select TLS for Model TLS KTLS for Model KTLS
(2)
Number of Elements
Select 2 for 2 Elements 3 for 3 Elements
(3)
Wattage
Select 20 for 2 kW 30 for 3 kW 40 for 4 kW 60 for 6 kW 80 for 8 kW 90 for 9 kW 10 for 10 kW 12 for 12 kW 15 for 15 kW 18 for 18 kW
(4)
Riser
Select 36 for 36 in. 48 for 48 in.
(5)
Voltage
Select 120V for 120 V 240V for 240 V 480V for 480 V
(6)
Power
Select Nothing(leave field blank) /3P for 3 phase power
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
Keywords:Over-the Side Immersion Heaters for Mildly Corrosive Fluids, measuring torque
