FEATURES Rugged construction, Sturdy 0.475" diameter elements welded to steel flanges provide superior
rigidity and strength. Heavy duty jumper straps and terminal posts assure permanent tightness of
connection’s carrying capacity.
High conductivity elements — Filled with highest purity blends of magnesium oxide refractory (MgO)
compacted to a rock hard density to insure maximum thermal conductivity, maximum electrical
resistance, and assure long element life.
Heavy coil construction– Watt density on the heating coil is designed for low watt density
operation by increasing the coil diameter and length to give maximum coil surface temperature, providing
longer coil life.
APPLICATIONS
Heating heavy, viscous oils reduces their viscosity, permitting better pumpability for transfer operations.
Lowering the viscosity allows increased system flows for any given horsepower. Transfer system
designs can employ smaller motor and drive components ensuring optimum system economy.
Preheating permits use of less expensive fuel oils, allows easier pumping and provides better
atomization, increasing combustion efficiency.
CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified
personnel. See inside back cover for additional warning.
/** Designate voltage, i.e. insert 240V for 240 Vac or 480V for 480 Vac.
Note: Larger flange sizes and kW ratings and power supplies are available. contact OMEGALUX.
1 Heaters with General Purpose and Moisture Resistant Enclosures are UL Listed and CSA Certified.
2 Heaters with Explosion Resistant Enclosures are CSA NRTL/C certified and are not intended for use in hazardous
areas.
3 E1 enclosure “N” designates conduit size, E2/E3/E4 enclosures “N” designates NPT threat size.
4 Weights:
A. For Wt. of 3" flange with E2 enclosure, add 3 lbs. to Wt. of E1 enclosure.
B. For Wt. of 5" flange with E3 or E4 enclosure, add 7 lbs. to Wt of E1 enclosure.
† All dollar amounts on this site are shown in US currency.
Part Number Builder
Option Descriptions
(1)
Number of Steel Sheath Elements
Select 3 for 3 Steel Sheath Elements 6 for 6 Steel Sheath Elements
(2)
Wattage
Select 012 for 1.2 kW 016 for 1.65 kW 021 for 2 kW 024 for 2.5 kW 015 for 1.5 kW 018 for 1.8 kW 024 for 2.4 kW 033 for 3.3 kW 042 for 4.2 kW 049 for 5 kW 054 for 5.4 kW 060 for 6 kW 069 for 6.9 kW 072 for 7.2 kW 084 for 8.4 kW
(3)
Voltage
Select 240V for 240 V 480V for 480 V
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
