Cart  |  Contact  |  Help  | 
1-888-826-6342  | 
US and Canada1-888-826-6342
International1-203-359-1660

Your One-Stop Source for Process Measurement & Control!

Wireless Process Transmitter for Sensors with Voltage or Current Output

UWPC-2-NEMA

UWPC-2-NEMA:Wireless Process Transmitter for Sensors with Voltage or Current Output

$275.00 UWPC-2-NEMA

1 year warranty NEW! CE
  • Convert Process Signal to Wireless
  • Accepts 0 to 1V, 0 to 5V, 0 to 10V and 4 to 20 mA Signals
  • Industrial NEMA 4X (IP65) Enclosure
  • Free Software for Monitoring, Recording, and Data Logging Included
  • Low Power Operation/Sleep Mode for Long Battery Life
  • UWTC Receivers Work with Up to 48 Wireless Transmitters
View related products - Wireless Sensors, Transmitters, Receivers, Meters & Controllers

Description

The new UWPC wireless process transmitter converts standard process signals (0 to 1V, 0 to 5V, 0 to 10V and 4 to 20 mA) into a wireless signal that can be transmitted up to 120 m (400'), eliminating the need for wiring runs in a variety of environments. The wireless transmitter is housed in a NEMA 4X (IP65) enclosure, providing water and dust protection. The UWPC transmits data at preset intervals, selectable from 2 to 120 seconds. Transmitted data includes the sensor reading, along with RF signal strength and battery status.

The UWPC is compatible with the UWTC-REC family of wireless receivers, which can accept signals from up to 48 wireless transmitters, and display them on a PC. Receivers are available with optional display and analog output. An analog output can be used to interface with a process controller, PLC or data acquisition device. Each unit includes free software that converts your PC into a monitor, chart recorder or data logger. Readings can be saved and later printed or exported to a spreadsheet file.

Wireless Receivers
UWTC-REC1: 48-channel wireless receiver with USB
UWTC-REC2: 48-channel wireless receiver with USB and single analog output
UWTC-REC4: 48-channel DIN rail mount wireless receiver with USB and four analog output signals
UWTC-REC6: economical single channel wireless receiver with single analog output

SPECIFICATIONS
Input Range: 0 to 1 Vdc, 0 to 5 Vdc, 0 to 10 Vdc or 4 to 20 mA
Accuracy: ±0.04% of range
Input Connection: Panel connector (mating connector supplied)
Computer Interface: USB, for initial transmitter/sensor setup and configuration
Transmit Sample Rate: Programmable from 1 sample/2 sec to 1 sample/120 sec
Radio Frequency (RF) Transceiver Carrier: ISM 2.4 GHz, direct sequence spread spectrum
RF Output Power: 10 dBm (10 mW)
Range of RF Link:
    Outdoor Line of Sight: Up to 120 m (400')
    Indoor/urban: Up to 40 m (130')
RF Data Packet Standard: IEEE 802.15.4, open communication architecture
Software (Included Free): Requires Windows® 2000, XP or Vista (32 bit) operating system
Power: One 3.6V, lithium "C" cell (included)
Battery Life (Typical): 3 years 1 sample/minute reading rate @ 25°C
Enclosure: NEMA 4 (IP65), polycarbonate
Enclosure Dimensions: 80 L x 82 mm W (3.15 x 3.23")
Weight: 272 g (9.6 oz)
Place Order(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/Desc.
Availability
Price
Description
Qty
Click to expand/minimize a list of what others bought with theUWPC-2-NEMA
UWPC-2-NEMA
Star
Availability: 1 week  
$275.00   
Wireless process input transmitter, 0 to 1 Vdc, 0 to 5 Vdc, 0 to 10 Vdc or 4 to 20 mA input ranges
 
Accessories
  
UWTC-CABLE
Star
Availability: In Stock  
$5.00   
Spare USB programming/communication cable
 
Click to expand/minimize a list of what others bought with theUWTC-BATT-C
UWTC-BATT-C
Star
Availability: In Stock  
$25.00   
Replacement 3.6V, lithium 'C' cell battery assembly
 
All amounts shown in USD
Note: Because of transmission frequency regulations, these products may only be used in the United States, Canada and Europe (please note CE compliance of the specific model for use in Europe).
Comes complete with measurement/data logging software, lithium "C" cell battery, USB cable, and operator's manual.
Ordering Example: (1) UWPC-2-NEMA wireless process input transmitter, $275.00  plus (1) UWTC-REC1 48-channel wireless receiver, with USB communications, $235.00, $275.00 + 235.00 = $510.00
Related Links
Related Products:
UWTC-REC1 and UWTC-REC2
UWTC-REC1 and UWTC-REC2
SHOP NOW →
Wireless Connector/Transmitter Receivers
UWTC-REC4
UWTC-REC4
SHOP NOW →
Wireless DIN Rail Mount Receivers with Analog Outputs
MWTC-REC6 & UWTC-REC6
MWTC-REC6 & UWTC-REC6
SHOP NOW →
Wireless Transceiver Module