Typical applications of wire duct used in electrical control cabinet (above) and to contain power and networking cables in one of Omega’s training centers.
WD Series wiring duct is the premium wire management product
for routing and organizing wiring in control panels. Wire duct is one
of the cable management products developed specifically for use within
cabinets and control panels. These wiring ducts come in a variety of sizes
and colors to meet the specific needs of the largest integrated turnkey
systems, to the small control panel projects.
SPECIFICATIONS External Dimensions including lid: Length: 2 m (6.6') Width: 25= 29mm (1.14"); 40= 41mm (1.61"); 60= 54mm (2.13") Height: 40= 41mm (1.61"); 60= 54mm (2.13"); 80= 79mm (3.11") Service Temperature: -15 to 60°C (-5 to 140°F) Standard Slot: Grey, White, Black or Blue Width: 8 mm (0.31") Pitch: 20 mm (0.79") Thin Slot: Grey, White, or Black Width: 4 mm (0.16") Pitch: 10 mm (0.39") Colors: Grey is available in single pieces or package quantities, White, Blue or Black is available only in package quanties.
For colors please call to place you order. 1-888-556-6342
† All amounts shown in USD Note: Note: S Standard slot width, T Thin slot width. White, Blue & Black can be ordered in package quantities only, Call 1-888-556-6342 to order colors. Ordering Example:
(1) WD-B40X60T-8PK Package of 8 grey wiring duct, 40x60 mm (1.58x2.36, $245.00
Part Number Builder
Build Your Part Number Below
Width select from: 25 for 29mm (1.14in) wide 40 for 41mm (1.61in) wide 60 for 54mm (2.13in) wide
Height select from: 40 for 41mm (1.61in) high 60 for 54mm (2.13in) high 80 for 79mm (3.11in) high
Slot select from: S for Standard slot T for Thin slot
Packages select from: Nothing(leave field blank) for Single piece -8PK for Package of 8 -12PK for Package of 12
Note: All combinations may not be valid, check spec sheet for valid part numbers.