The new thermal wind tunnel from OMEGA is
designed to give a highly accurate and uniform flow
rate. Four powerful DC fans are precisely controlled to
provide variable air speeds from 0 to 1000 ft/min. The
WT-2000 wind tunnel was designed to provide
thermal characterization of circuit boards, heat sinks
and components. The unit is made of clear
polycarbonate and PVC for a durable and transparent
assembly. The large test section is accessed by the
large hinged door and accommodates a removable
test plate, as well as a rail system that allows for a
wide range of mounting options. In addition, there
is a small access door that accommodates the quick
changing of smaller components and the placement
of sensors. Multiple access ports with 1/4 and 1/2 "
compression fittings are provided on the top and rear
panel of the wind tunnel for the routing of wires and
insertion of sensors.
WIND TUNNEL Flow Rate: 5 m/s (0 to 1000 ft/min) Size: 80.5 L x 18.4 W x 48.4 cm H (31.7 x 7.3 x 19.1") Weight: 12.48 kg (27.5 lb) Test Chamber: 43 x 8.25 cm cross section (17 x 3.25") Fan Speed: 3800 RPM DC Fan Motor: 12 Vdc @ 0.47A ea (5.6W ea) x 4 Noise: 61 dBA max, 1 meter away ELECTRICAL CONTROL BOX Power: 90 to 264 Vac @ 47 to 63 Hz Fuse: 2A fast acting 5 x 20 mm cartridge type Size: 16 L x 13.8 W x 6.7 cm H (6 1/4 x 4 7/16 x 2 11/16") Weight: 0.9 kg (2 lb) PC Interface: USB Operating Temperature: 5 to 45°C (41 to 113°F) Operating Relative Humidity: Less than 80% without condensation
*All specifications measurements at ambient room temperature
of 22.2°C (70°F) with less than 80% relative humidity and
760 mm (29.92") of Hg barometric pressure.
† All dollar amounts on this site are shown in US currency. Note: Comes with fully assembled wind tunnel test chamber, electronic control box controller fan control cable, PC interface cable, molded power cord (for US, Canada, and Mexico), complete operator'’s manual, and PC interface software CD. Ordering Example: (1) WT-2000 Wind tunnel package, $4,995.00 plus (1) SA1-K Type K self adhesive thermocouples with stripped ends (5-pack), $63.00, $4,995.00 + 63.00 = $5,058.00