Unique OMEGA® family of high temperature types J, K, E or N thermocouples are double-protected with abrasion-resistant Inconel overbraid with high temperature ceramic fiber insulation. A temperature rating of 980°C (1800°F)continuous service and 1090°C (2000°F) short-term service makes these products ideal for many high temperature measurement applications. They are unexcelled for profiling ovens and furnaces. The 20-gage solid conductor thermocouple wires are insulated with braided Nextel® ceramic Over the ceramic fiber is a rugged overbraid of Inconel 600® –a tough, high-temperature, high nickel content alloy. Five convenient styles are available in 3 ft. and 10 ft. lengths for high temperature measurement applications.
Specifications Wire Gage: 20 gage solid–standard limits of error Insulation: Nextel® ceramic fiber Overbraiding & Fittings: Inconel 600® Temperature: 980°C (1800°F) continuous,1090°C ( 2000°F) short-term service, depending
on thermocouple type. Termination: Ceramic beaded leads with compensated spade lugs, OMEGA® OSTW 220°C (425°F)
male connector, or OMEGA® NHXH high temperature 650°C (1200°F) ceramic male connector
A grounded junction thermocouple with the Inconel overbraid welded to form a smooth rounded tip for all general purpose applications.
A general purpose, bead welded, exposed junction thermocouple.
An exposed junction, bead welded junction thermocouple with an Inconel collar to clamp the probe to a surface, or to secure it into a hole or any fabrication.
Grounded junction. It can be bolted to a surface, or the Inconel eye can hook the thermocouple to a conveyor flight. Ungrounded junction versions are available. Contact sales for more information.
Has an Inconel air hood to protect the beaded wire exposed junction. This design can be clamped to a surface, hooked to a conveyor flight, or bolted to a surface by using the through hole at the open end of the hood.
* Specify Thermocouple Type: J: Iron-Constantan, K: CHROMEGA®-ALOMEGA®, E: CHROMEGA®-Constantan, N: OMEGALLOY®-NICROSIL-NISIL
Use prefix of “ CAL-” for assemblies to be supplied with calibration data at specified temperatures. Check Sales Dept. for pricing
** Specify length in feet. 3' or 10' standard. Note: Available with Silica insulation. Change “XCIB” in model number to “XSIB”. No additional charge.
† All amounts shown in USD Note: For lengths over 10 feet, add $3.60 per foot to the price and for lengths over 50 feet, add $3 per foot to the price.
Part Number Builder
Build Your Part Number Below
Thermocouple Type select from: J for J Type Thermocouple K for K Type Thermocouple E for E Type Thermocouple N for N Type Thermocouple
Probe Style select from: 1 for Grounded Welded Junction 2 for Exposed Junction 3 for Exposed Junction with Collar 4 for Bolt-on Junction 5 for Air Hood Junction
Termination select from: 1 for Ceramic Beaded Leads with Spade Lugs 2 for OST Male ConnectoR 3 for NHXH Ceramic Connector 4 for Nextel Insulated Leads with Spade Lugs 5 for Stripped leads 6 for SMPW mini-male 7 for SHX mini-male ceramic
Length select from: 3 for 3 Feet 10 for 10 Feet CUSTOM for custom length in feet(whole numbers up to 50' max. For over 50' please consult sales)
Note: All combinations may not be valid, check spec sheet for valid part numbers.