 |
The FMG600 Series
electromagnetic flow meters
are designed for
measurement of conductive
liquids. The FMG600 mag meters have no moving parts
and a PTFE lining, they can
handle applications involving
wastewater, pulp, food, and
slurries. Standard outputs include
analog, frequency, and RS485
communications. Optional sanitary
tri-clamp mounting allows use of the
FMG600 flowmeters in applications
not previously open to magmeters.
Local- and remote-display models
are available.
NOTE: HEAVY WEIGHT - OVERWEIGHT SHIPPING CHARGES MAY APPLY FOR THIS PRODUCT. IF ORDERED ON-LINE INTERNET SALES WILL CONTACT YOU AFTER ORDER PLACEMENT UNLESS YOU OPT TO CHARGE FREIGHT TO YOUR CARRIER ACCOUNT.
SPECIFICATIONS
Flange Sizes:
150# ANSI: 19 to 305 mm (¾ to 12")
Sanitary Tri-Clamp: 13 to 305 mm (½ to 12")
Maximum Pressure: 145 psi
Minimum Conductivity: 20 µS
Electrode Material: Hastelloy C4 (standard), tantalum (TGE optional)
Environmental Temperature: -5 to 55°C (23 to 131°F)
Sensor Lining: PTFE
Electronics Housing: Local or remote (optional)
Liquid Temperature: 0 to 50°C (32 to 122°F) STD, 0 to 150°C (32 to 302°F) with remote electronics
Empty Pipe Alarm: 2" and larger sizes (EPT optional)
Accuracy: ±0.5% from 5 to 100% Qs, ±1% from 1 to 5% Qs
Range: 0.1 to 10 m/s (0.328 to 32.81 fps)
Outputs: Adjustable from 0.1 to 1000 gallons/pulse
Current: 4 to 20 mA with galvanic isolation
Frequency: 0 to 1000 Hz with galvanic isolation
Communications: RS485
Power: 24 Vdc, 115/230 Vac switchable (optional)
Consumption: 15 VA
Protection: IP67 Storage Temperature and Humidity: -10 to 70°C (14 to 158°F) at max; relative humidity 70%
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Optional equipment: For units with switchable 115Vac to 230 Vac power, add “-VAC” to the model number and subtract $100 from the price.
For empty pipe detection on units 2" and larger, add “-EPD” to the model number and add $300 to the price.
For units with a batching option, add “-B” to the model number and add $320 to the price.
For units with tantalum electrodes, add “-TE” to the price and add $490 to the price. If a third tantalum grounding electrode is needed, add “-TGE” to the model number and add $250 to the price.
If a third hastelloy grounding electrode is needed, add “-HGE” to the model number and add $200 to the price.
For a 4-point NIST calibration, add “-NIST4” to the model number and add $520 to the price.
For a 10-point NIST calibration, add “-NIST10” to the model number and add $1,040 to the price.
Unit comes with complete operator’s manual and 3-point NIST calibration certificate
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)
Ordering Example: (1) FMG601-S 15 cm (1/2") SS sanitary mount magmeter with empty pipe detection = $4120
|
|
|
|
|
| |
|
Keywords:Electromagnetic Flowmeters, Magnetic Flow meter, waste water flow meter, magmeter, flanged magnetic flow meter, wafer magnetic flow meter, magnetic flowmeter, flow measurement, flow meters, mag meter
|
Back to top |
|
|
