 |
 | |||
 |
 | |||
 |
||||
|
|||||||||||||||
|
Pressure, Strain and Force Products
| |
| Model | Description |
| 5SE01313 Series | 0.25% Accuracy Marine Pressure Transducers All Stainless Steel Construction |
| 6SE01079 Series | Sputtered Gauge Marine Pressure Transducers with Amplifier/Regulator |
| 70 Series | Audible Alarm Annuciators(buzzer) - Models: 70A-1, 70A-2, 70A-3, 70A-4 |
| ACC-CABLES | Input/output Cables for Dynamic Sensors, Power Supplies and Instrumentation |
| ACC-PS1 and ACC-PS2 | Accelerometer Power Supplies, Battery Powered |
| ACC-PS3 and ACC-PS4 | Accelerometer Power Supplies, AC Powered, Single Channel and Triaxial Supply |
| ACC101 |
Accelerometers For Industrial Applications |
| ACC102 | Industrial Accelerometer |
| ACC103 |
Accelerometers Laboratory Grade for High Vibration Levels |
| ACC104A | Low Mass Accelerometer for High Vibration Levels |
| ACC301 | Triaxial Accelerometer |
| ACC310 | Accelerometer, General Purpose Top-Mount Industrial |
| ACC320 | Accelerometer, General Purpose Industrial, with Side Exit Cable |
| ACC786A |
Accelerometer Industrial, Top entry |
| ACC787A |
Accelerometers Low Profile Industrial Grade |
| ACC793 |
Accelerometer Premium Grade Top Entry |
| ACC797 |
Accelerometer Premium Grade, Low Profile |
| AVC-1000 and AVC-3000 | Pressure Volume Controllers, AVC-1000 and AVC-3000, Vacuum to 1000 or Vacuum to 3000 |
| AR91 and AR92 Series | Miniature Pressure Regulators |
| BCM-1 | Strain Gage Bridge Completion Module |
| Parallel Grid Dual Strain Gages | Double Strain Gages, 2 Measuring Grids |
| BG18 | Bargraph Indicators, Horizontal or Vertical Scale |
| BOS Series | Benchtop Oscilloscope |
| RES-2C, RES-5C, RES-2N, RES-5N | Bridge-Balancing and Zero Temperature-Compensation Resistors |
| BTP-1, RES-120, SGB-36 |
Strain Gage Accessories Resistance Wire Bondable Terminal Pads (BTP) Bridge Completion Resistors |
| Calibrators Product Finder | New Calibrator Product Finder - It's the easiest way to sort through our selection of calibrators to find the right product for your application |
| Instrument Cases | Carrying Cases |
| CCT Series | Economical DIN Rail Signal Conditioners |
| CIO-EXP16 and CIO-EXP32 | 16 or 32 Channel Multiplexers for Voltage or Thermocouples |
| CL250 | Frequency Calibrator |
| CL3512 | Low Cost Handheld DigitalThermometer/Calibrator |
| CL543 | Dual Thermocouple and RTD Calibrator |
| CLD-II | Portable Documenting Calibrator |
| CLH-II | Model CLH-II mA Loop Calibrator |
| CN1001 | 1/8 DIN Digital Proportional On/Off Temperature Controller |
| CN77000 | 1/16 DIN MICROMEGA® Autotune PID Temperature/Process Controllers |
| CN9-SW | Cloning, Logging and Charting Software that Supports CN9300. CN9400 & CN9500 with Communications Options |
| CN9300, CN9400, CN9500 and CN9600 Series | 1/32 & 1/16 DIN Temperature/Process Autotune Controllers |
| CN9600 Series | 1/16 DIN Temperature/Process Autotune Multi Ramp and Soak Controllers with Optional Plug-in Communications and CN9-SW-GRAFIX Cloning, Logging & Charting Software |
| CNi Series | i-Series 1/32, 1/16, 1/8 DIN Programmable Temperature/Process Controllers with RS-232 & RS-485 Communications. |
| CNi16 Series | i-Series 1/16 DIN Programmable Temperature/Process Controllers with RS-232 & RS-485 Communications. |
| CNi32 Series | i-Series 1/32 DIN Programmable Temperature/Process Controllers with RS-232 & RS-485 Communications. |
| CNi8 Series | i-Series 1/8 DIN Programmable Temperature/Process Controllers with RS-232 & RS-485 Communications. |
| CNI8C and CNIS8C | 1/8 DIN Ultra Compact Case Temperature, Process and Strain PID Controllers |
| CNI8DH and CNI8DV | 1/8 DIN Dual Display Temperature, Process and Strain PID Controllers |
| CNiS32 & DPiS32 Series | i-Series 1/32 DIN Programmable Strain/ Process Controllers and Meters with RS-232 & RS-485 Communications Featuring a Totally Programmable Color Display |
| SG Crack Propagation Gages | Strain Gages to Measure Crack Propagation |
| CS7000, CS7600 | High-Resolution Count/Weigh Scales |
| CSC32 | Compact CN9500 Controller in Rugged Benchtop Case |
| CT585B | Pressure/Temperature Recorders with Large 8" (200MM) Diameter Charts |
| CT7000 | Single and Dual Pen Circular Recorder with Digital Display |
| CT87P | CT87P Pressure Recorders |
| CT9000 Series | Microprocesser-Based Circular Chart Recorders, 1 to 4 Pen, 10 to 12" Charts, T/C, RTD, V, mV, mA or Switch Input, Up to 4 Alarms per Variable |
| CX136 | Connectors, Push-On Style, Crimp Contact |
| CX5300 | DIN Connectors |
| D1000 and D2000 | OMEGABUS® Digital Transmitters |
| Data Acquisition System Product Finder | New Data Acquisition Product Finder - It's the easiest way to sort through our selection of data acquisition systems to find the right product for your application |
| DFG-TS | Manual Test Stand for DFG Force Gages |
| DFG51 | Microprocessor-Based Digital Force Gage, Ranges from 0.25 to 200 LB |
| DFG60 |
Industrial Grade Digital Force Gages To be Discontinued - Limited Stock Available |
| DFG70 |
Laboratory Grade Digital Force Gage and Datalogger
Discontinued Product |
| DFG81 | Mechanical Force Gages Industrial Grade |
| DFG82 | Mechanical Force Gages Laboratory Grade |
| DIALS | Standard Dials for Comercial and Panel Gauges |
| SG Diaphragm Gages | Diaphragm Strain Gages, Full Bridge Diaphragm Rosette |
| DIN-100 OMEGABUS® | Din Rail Mount Digital Transmitters |
| DLC101 | Dynamic Load Cell |
| DMD-465 | Strain Amplifier/Signal Conditioners Modules for Strain Gages, Load Cells and Transducers |
| DMD-475 | Isolated Signal Conditioners with Transducer Power up to 120 mA for Strain Gages, Load Cells and Transducers |
| DMD-519 |
High Performance Strain Gage Amplifier To be Discontinued - Limited Stock Available |
| DMD-520 |
Economical, High Performance Strain Gage Amplifier To be Discontinued - Limited Stock Available |
| DMD Series | In-Line Amplifiers for Pressure Transducers and Load Cells |
| DMD21 | Single-Channel, Portable Strain Gage Monitoring System |
| DMD22 | 10-Channel Portable Strain Gage Monitoring System |
| DP1028 | Transducer Indicator System, Powers up to 10 Load Cells |
| DP1610 Series - Discontinued | 1/8 DIN Temperature & Process Indicators with Optional Field Installable Output and Communications Boards |
| DP18 Series | 1/8 DIN Economical Digital Meters for Temperature, Process or Electrical Measurement |
| DP2000 | OMEGAROMETER® DP2000 Series Process & Strain Monitors |
| DP24-E | 1/8 DIN Economical Process Meter |
| DP24-T | 1/8 DIN Economical Thermocouple Meter |
| DP25-VRMS & DP25-CRMS | High Accuracy True-RMS Scalable Indicator for AC Sinusoidal and Non-Sinusoidal Signals |
| DP25B Series | Process Meter & Controller |
| DP25B-E and DP25B-S | Strain and Process Meter with Large, Selectable Color Display |
| DP25B-S | Strain Meter/Controller |
| DP25B-TC and DP25B-RTD | Thermocouple and RTD Panel Meter with Large, Selectable Color Display |
| DP302-P | Economical Digital Transducer Indicators for Strain Gage or Process Inputs |
| DP3300 | Dual-Channel Process Monitor 1/8 DIN Size |
| DP35 | Process Indicators, DPM35A Miniature 1/32 DIN Model, DP35 Loop Powered 1/8 DIN Model |
| DP3600 | Programmable Process Monitors, Offer Scaling, Process Alarms, Deviation and Rate Limits, Two Timers Plus built-in Buzzer |
| DP41 | 1/8 DIN High Performance Panel Meter |
| DP41-S | High Performance Strain Gage Meter, High Resolution 6-Digit Display |
| DP41-W | Legal-For-Trade Weigh Scale Panel Meters, NTEP Approved Per HB44 |
| DP41-B | 1/8 DIN ULTRA HIGH PERFORMANCE METER |
| DP434 | Indicators for Melt Pressure Control, Models DP434 Digital and DP409 Analog Controllers |
| DP450 Series | 1/8 DIN Low Cost Digital Panel Meter for Process, Voltage, Frequency or Current Inputs with Optional Alarm or Excitation Supply |
| DP460 | Economical Process and Strain Gage Indicators, Accepts Voltage, Current and Millivolt Inputs |
| DP460-T | Economical Temperature Meter |
| DP470 Series | 1/8 DIN Temperature or Process Measurement Indicator |
| LDP63800-E, LDP63900-S | Digital Process or Strain Gage Panel Meters with Built in Excitation |
| DP7600 | High Speed Load/Strain Meters and Process/Voltmeters, Dual Differential Inputs Available |
| DP7800 | Dual Input Process Meters with Math Functions for Process Voltage or Current Inputs |
| DP87 | 5-Digit Precision Strain Gage Indicators with Excitation Supply |
| DPF400 | Rate/Total/Batch Meters |
| DPF5100 | MultiFunction Meter for Batch Control, Rate Indication and Totalization |
| DPF50 | Compact 3/64 DIN Size Process Meters with Full Size LED's |
| DPF60 Series | DPF60 Series Ratemeters, Totalizers and Batch Controllers for Voltage and Current Inputs |
| DPF701 | 6-Digit Rate Meter/Totalizer |
| DPF75 | Ratemeters, Totalizers and Batch Controllers for Frequency Inputs |
| DPG-701 | Room Pressure Monitors |
| DPG10 Series | Large Display 4-Digit Digital Gauge - Battery Powered |
| DPG1000 | Digital Pressure Gauges |
| DPG1001 Series | High Accuracy Digital Pressure Gauges with NIST Certification |
| DPG120 Series | Digital Pressure Gauges, Rugged |
| DPG1100 Series | Digital Pressure Gauge NEMA-4 Rated |
| DPG1200 Series (Limited Stock Available) | Economical Digital Pressure Gauge for Clean Dry Gases |
| DPG1202 Series (Limited Stock Available) | Economical Digital Pressure Gauge Stainless Steel Wetted Parts |
| DPG1203 Series (Limited Stock Available) | Digital Pressure Gauge for Differential Pressure |
| DPG2000-DPG5000 | Battery Powered Digital Pressure Gauges |
| DPG3000 | NEMA-4X Digital Pressure Gauge, Battery Powered |
| DPG3500 Series | Min/Max Digital Pressure Gauges with NEMA 4X Case |
| DPG4000 | High Accuracy Digital Pressure Gauge |
| DPG4000-KIT | Pressure Calibration Kit |
| DPG-500 | Digital Pressure Gage, Measuring Range from -14 to 500 psig |
| DPG5500 Series | Min/Max Digital Pressure Gauges |
| DPG5600 Series | Min/Max Digital Pressure Gauges with Display Backlighting |
| DPG6000 | All Stainless Steel Digital Gauge, Battery Powered |
| DPG7000 Series |
Digital Test Gauge Precision 0.05% Accuracy with Stainless Steel Cover |
| DPG7010 and DPG7025 Series |
High-Accuracy Digital Pressure Gauges Large, easy-to-read, display |
| DPG8000 Series |
General Purpose Digital Pressure Gauge Protective Rubber Boot |
| DPG9000, DPG9100, DPG9200 Series | Industrial Digital Pressure Gauges - DC, Loop, or Battery Powered Models |
| DPI Series - Models DPi32, DPi16, DPi8 | i-Series 1/32, 1/16, 1/8 DIN Programmable Temperature/Process Meters with RS232 & RS485 Communications |
| DPi Series | i-Series 1/32, 1/16, 1/8 DIN Programmable Temperature/Process Meters with RS232 & RS485 Communications Standard |
| DPi Series | i-Series 1/32, 1/16, 1/8 DIN Programmable Temperature/Process Meters with RS232 & RS485 Communications Standard |
| DPI603 | Portable Pressure Calibrators with Built in Pressure Pump |
| DPI610 | High Accuracy Portable Pressure Calibrators with Built in Pressure Pump |
| DPI705 | Portable Pressure Indicators, Internal or Remote Sensors for Differential Gauge and Absolute Measurement |
| DPI740 | High Accuracy Handheld Barometer with NIST Traceable Certification |
| DPI8C and DPIS8C | i-Series 1/8 DIN Ultra Compact Temperature, Process and Strain Meters |
| DPL53 | High Performance Indicator for use with AC Output LVDT |
| DPS3100 | Programmable Process Scanners, 1/8 DIN. 4-and 7- Channel Input |
| DPS3100 & DPS3200 Series | 1/8 DIN 4 & 7-Channel Temperature or Process Scanner with Optional Outputs |
| DPX101 | Dynamic Pressure Transducers |
| DR601 | High Performance Digital Readouts for Linear Encoders and Digital Gage Probes |
| DRF Series | DIN Rail Mount Configurable Signal Conditioners |
| DRG-SC Series | DIN Rail Mount Signal Conditioners |
| iDRN/iDRX Series | Programmable Signal Conditioners/Transmitters |
| DTG-500 | Coating Thickness Gauge |
| DVG-60 | Electronic Vacuum Gauge with LED Readout |
| DVG-64 | Digital Vacuum Gauge with LCD Readout |
| DWT1305 | Precision Deadweight Tester, 0.1% Accuracy, 15 to 10,000 psi Range |
| DWT1327D | Portable Dial Gauge Calibrator Kit for use with 1/4% Accuracy Test Gages |
| EIS-2B Series | Industrial MicroServers |
| EWS Series | Environmental Wall Mount Sensors |
| Measuring Grid, Encapsulated with Ribbon Leads or Solder Pads | General Purpose Strain Gages |
| Strain Gages |
STRAIN GAGE SPECIFICATIONS CHARTand GRID DIAGRAMS SGD Series General Purpose Strain Gages |
| GP901 | Digital Gaging Probes for Linear Displacement Measurement |
| GP911 | Analog Gaging Probes |
| Handheld Meters Product Finder | New Handhelds Product Finder - It's the easiest way to sort through our selection of handhelds to find the right product for your application |
| HHP-103 | Digital Manometer - Very Low Range |
| HHP-2000 | Handheld Digital Manometers, Ranges from 10.00 to 2815 INH20 with Leak Testing and Datalogging Options |
| HHP-201 | Handheld Air Pressure Meter for Differential and Absolute Air Pressures |
| HHP-401 | High Stability Digital Manometers - DISCONTINUED PRODUCT |
| HHP-801 | Wet/Wet or Dry Manometers for Differential, Gauge and Vacuum Pressure Measurements |
| HHP-90 | Economical Handheld Digital Pressure Meter |
| HHP-PRX | Handheld Proximity Tester |
| HHP-SG | Handheld Transducer Indicators with Excitation for Millivolt Transducers |
| HHP680 | Manometer, Low Cost Handheld |
| HHP8200 Series | HANDHELD MANOMETER WITH RS232 AND OPTIONAL SOFTWARE |
| HHP91 | Economical Manometer Single or Differential Inputs |
| HHTQ88 | Digital Torque Meter with RS232 Output |
| HHVB82 | Economical Vibration Meter |
| I-STRAIN | 1/32 DIN Models iS32, Strain and Process Meters and Controllers |
| iDR Series | iSeries PID Controllers and Signal Conditioners |
| IH101 | Impulse Hammer |
| iLD Series | iLD Series BIG Display Meters & Controllers |
| INET Series | instruNet Series Direct Sensor to Data Acquisition |
| IP210 | Current to Pressure (I/P) Converter |
| IP211 and EP211 | General Purpose Electropneumatic Transducers |
| IP411 | Current to Pressure (I/P) and Voltage to Pressure (E/P) Electropneumatic Converters |
| IP510, EP510, IP511, EP511 Series | Heavy Duty Electropneumatic Converters |
| IP610 Series | Miniature I/P Electronic Air Pressure Control |
| IP710 Series | Miniature High Accuracy I/P Transducer Electronic Air Pressure Control |
| JBOX |
Load Cell Summing/ J Junction Boxes for Multiple Load Cell Installations
DISCONTINUED PRODUCT |
| JBOX4800 | Summing Box/Transmitter, 4-20 mA and 0-10 Vdc Outputs |
| JBOX-4-ET | Summing Box for Multiple Load Cells |
| LC1001-BP | Mounting Plates for LC1001/LC1011 Series Load Cells, Alloy Steel or 17-4 PH Stainless Steel |
| LC1000-TP | Mounting Plates for LC1001/LC1011 Series Load Cells, Nickel Plated Steel or 17-4 pH Stainless Steel |
| LC1001 |
Canister Load Cells Heavy Duty Design |
| LC101 and LC111 Series |
S-Beam Load Cells High Accuracy, Economical Price |
| LC105 and LC115 Series |
"S" Beam Load Cells High Accuracy at an Economical Price |
| LC1102 | Canister Load Cells - High Output, Tension or Compression |
| LC1103 |
Canister Load Cell High Capacity Universal Design Rugged Stainless Steel Case |
| LC1284 | Heavy Duty Canister Style Compression Load Cells, Multi-Column Design |
| LC1288 | Canister Style Compression Load Cells, Multi-Column Design |
| LC201 | Subminiature Tension and Compression Load Cell, 0.75" Diameter |
| LC202 | Miniature Universal Load Cells, Stud Mount Style, 1" to 1.38" Diameter |
| LC203 and LC213 Series |
Miniature Load Cells 2" Diameter, Dual Stud Mount Style |
| LC204 | High Accuracy Miniature Universal Load Cells, Surface Mount 2" Diameter |
| LC302 | 0.75" Diameter Stainless Steel Compression Load Cell |
| LC304 | 1" Diameter Stainless Steel Compression Load Cell, 0-100 to 0-10,000 LB. Capacities |
| LC305 and LC315 Sereis | Miniature Load Cell - 2" diameter All Stainless Steel with Back Mounting Holes |
| LC307 | Miniature Load Cell - High Capacity "Top Hat" Design, 0-250 to 0-100,000 LB Capacities |
| LC321 | Miniature Compression Load Cell with Threaded Center Hole |
| LC401 | High Accuracy Low Profile Compression Load Cell for Industrial Weighing Applications |
| LC402 | High Accuracy Low Profile Load Cell for Industrial Weighing Applications |
| LC412-TP | Tension Plates for LC402/LC412 Series Load Cells, 17-4 pH Stainless Steel |
| LC501 |
Beam Load Cell High Accuracy Stainless Steel Construction Self-Adjusting Weigh Modules Available |
| LC509 |
Beam Load Cells with Built-in Amplified Voltage Output |
| LC601 | Low Range Constant Moment Beam Load Cells with 4-Direction Overload Stops |
| LC602 | Heavy Duty Constant Moment Beam Load Cells, Environmentally Sealed |
| LC701 |
Tension Link Low Capacity --- Internal Thread Design |
| LC702 and LC712 Series | High Capacity Tension Link Load Cells |
| LC703 | Miniature Low Profile Universal Load Cell, 0.75" Height |
| LC8100 | Miniature Low Profile Through-Hole Load Cells, 1.00" or 1.25" OD |
| LC8150 |
Through-Hole Load Cells Low Profile with 1.5 Inch O.D. |
| LC8151 | Tall Through-Hole Load Cells, 1.50-3.00" Diameter |
| LC8200 | Compact Through-Hole Load Cells, 2.00 Inch O.D. |
| LC8250 | Compact Through-Hole Load Cells, 2.50 Inch O.D. |
| LC8300 | Compact Through-Hole Load Cells, 3.00 inch O.D. |
| LC8400 | Large I.D. Through-Hole Load Cells, 2.00-3.13 Inch I.D. |
| LC901 | Bolt Sensors with Mounting Washers |
| LCAA | Low Capacity Platform Load Cells for use in Industrial Weighing |
| LCAD | Platform Load Cell for Washdown Applications |
| LCAE | Economical OEM Style Single Point Load Cells |
| LCCA | High Accuracy "S" Beam Load Cells |
| LCCA-NTEP | Legal-For-Trade Load Cells, NTEP Approved Per HB44 |
| LCCD Series |
High Performance S Beam Load Cells Environmentally Protected |
| LCCP1 |
Through-Hole Load Cells for Oil Well Pump-Off Units
DISCONTINUED PRODUCT |
| LCDA | Low Profile Bending Beam Load Cells |
| LCDB | Rugged Beam Load Cells for Low Capacities |
| LCEA | Economical Bending Beam Load Cells |
| LCEB Series |
MINIBEAM LOAD CELLS EXCEPTIONAL ACCURACY |
| LCEC | Minibeam Load Cells, Exceptional Accuracy |
| LCFA | Miniature Load Cells |
| LCFD | Miniature Tension and Compression Load Cell, 0.75" to 1" Diameter |
| LCFL Series |
Load Cell, Miniature Tension or Compression Applications |
| LCGB Series |
Miniature Load Cell Industrial Design with Through-Body Mounting Holes |
| LCGC | Low Profile 1" Diameter Compression Load Cell |
| LCGD |
Miniature Load Cell Industrial Compression Load Cell to 50,000 LB |
| LCHD | Low Profile Tension and Compression Load Cell |
| LCJA | Heavy Duty Shear Beam Load Cells, LCJA Series |
| LCJB | Rugged Shear Beam Load Cells, LCJB Series |
| LCKD |
Subminiature Load Cell Rugged Industrial Design |
| LCL | Full Bridge Thin Beam Load Cells for Loads 1/4 to 40 LB |
| LCLB |
Low Cost Half-Bridge Load Cells for Tension/Compression Applications
Discontinued Product! |
| LCLC | Full Bridge Tension/Compression Load Cells |
| LCM1000-BP4 and LCM1000-TP4 | Mounting Plates for LCM1001/LCM1011 Series Metric Load Cells |
| LCM1001 and LCM1011 Series | Canister Style Compression Load Cells, Heavy Duty Design, Metric, 0-250 to 0-10,000 kgF |
| LCM101 and LCM111 Series | All Stainless Steel S Beam Load Cells, Metric, ±10 kgF to ±10,000 kgF |
| LCM105 and LCM115 Series |
ALUMINUM "S" BEAM LOAD CELLS Metric Ranges, 10 kgF to 500 kgF |
| LCM201 Series | Subminiature Tension & Compression Load Cells, Metric 19mm Diameter, ±100 to ±500 Newton |
| LCM202 Series |
Universal Load Cell, Miniature Metric 25 to 35mm Diameter, 0-100 N to 0-50,000 N |
| LCM203 Series and LCM213 Series |
Miniature Load Cells 51 mm Diameter |
| LCM204 and LCM214 Series |
Miniature Load Cells Surface Mount Style |
| LCM302 Series |
Miniature Compression Load Cell 19mm Diameter, all Stainless Steel Metric Ranges 0-100 to 0-5000 Newtons |
| LCM304 Series |
Miniature Load Cell 25.4 mm Diameter Stainless Steel Compression Load Cell Metric Ranges 0-100 to 0-50,000 N Capacities |
| LCM305 and LCM315 Series |
Miniature Metric Load Cell 51mm Miniature Diameter |
| LCM307 Series |
Miniature Load Cell High-Capacity Top Hat Style |
| LCM401 and LCM411 Series | High Accuracy Low Profile Compression Load Cell, Metric, 0-10 kgF to 0-5,000 kgF, For Industrial Weighing Applications |
| LCM402 and LCM412 Series | High Accuracy Load Profile Load Cells, Metric, ±25 kgF to ±10,000 kgF, For Industrial Weighing Applications |
| LCM501 and LCM511 Metric Load Cells |
Beam Load Cell High Accuracy Stainless Steel Construction Self-Adjusting Weigh Platforms Available |
| LCM601 Series | Low Range Beam Load Cells |
| LCM602 Series | Heavy Duty Constant Momemt Beam Load Cells, Metric, ±25 kgF to ±5,000 kgF |
| LCM701 and LCM711 Series | Low-Capacity Tension Link Load Cells |
| LCM703 Series | Miniature Low Profile universal Links, Metric, 19 MM TO 25 MM |
| LCM900 Series | Bolt Sensors with Mounting Washers, Metric, 0-500 N to 0-25,000 Newtons |
| LCMAD Series | Platform Load Cell for Washdown Applications |
| LCMFD Series | Subminiature Tension & Compression Load Cells, Metric, 19mm & 25mm±10 to ± 5000 Newtons |
| LCMFL Series | Load Cells Miniature Tension or Compression |
| LCMGD Series |
Miniature Load Cell Ranges 0-100 to 0-200,000 Newtons |
| LCMHD Series | Low Profile Tension and Compression Load Cells, Metric, ±2.5 kgF to ±10,000 kgF |
| LCMKD Series | Subminiature Industrial Load Cell, Metric, 0-10 to 0-10,000 Newtons |
| LCMUW Series, Metric | Hydrostatically Compensated Load Cell for Underwater Applications, Tension/Compression, ±50 kgF to ±5000 kgF |
| LCMWD Series | Load Washers, Metric, 0-50 kgF to 0-10,000 kgF |