Call us at 1-888-826-6342
1/16 DIN Temperature Controllers with Autotune, Alarms and RS485
1/16 DIN Temperature Controllers
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | $147.59 |
| 10-24 | $140.21 |
| 25-49 | $132.83 |
| 50-99 | $125.45 |
| 100-499 | $118.07 |
| 500+ | $110.69 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
This product series currently has an extended lead time. For a potential replacement, please see the CN4000-Series or CNPT-Series
- 1/16 DIN temperature controller with Dual Display
- Autotune
- RS-485 Communications
- Free Software
CN743 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Output Type
Measurement Type
Control Outputs
Form Factor
Number Of Inputs
Input Type
Communications
Supply Voltage Type
Display Type
- Communication Protocols (Sku Variant) RS-485
- Analog Input Accuracy ±0.25% span
- Control/Alarm Outputs, Maximum 1
- Control Algorithms Autotune PID Manual Control Mode
- Display Color Red/Green
- Display Digit Height 6.35 mm
- Maximum Ambient Temperature 50 {C} (122 {F})
- Measurement Type Temperature
- Minimum Ambient Temperature 0 {C} (32 {F})
- Number of Display Lines (Sku Variant) 2
- Other Features (Sku Variant) Software
- RTD Connection 2
- RTD Curves Supported 385
- RTD Types Supported RTD( 2
- Supply Frequency 50/60 Hz
- Thermocouple Type B
| Input Types | Range |
|---|---|
| Pt100Ω RTD | 0 to 100°C (32 to 212°F) -20 to 500°C (-4 to 932°F) -200 to 600°C (-328 to 1112°F) |
| B Thermocouple | 100 to 1800°C (212 to 3272°F) |
| S Thermocouple | 0 to 1700°C (32 to 3092°F) |
| R Thermocouple | 0 to 1700°C (32 to 3092°F) |
| N Thermocouple | -200 to 1300°C (-328 to 2372°F) |
| E Thermocouple | 0 to 600°C (32 to 1112°F) |
| T Thermocouple | -20 to 400°C (-4 to 752°F) -200 to 400°C (-328 to 752°F) |
| J Thermocouple | -20 to 400°C (-4 to 752°F) -100 to 850°C (-148 to 1562°F) |
| K Thermocouple | -200 to 1300°C (-328 to 2372°F) -200 to 500°C (-328 to 932°F) |
| L Thermocouple | -200 to 500°C (-328 to 932°F) |
| U Thermocouple | -200 to 800°C (-328 to 1472°F) |
SPECIFICATIONS
Inputs: Thermocouple, RTD, see chart
Display: Two 4-digit, 7 segment 6.35 mm (0.25') H LEDs
PV: Red
SV: Green
Resolution: 1 degree
Accuracy: ±0.25% span, ±1 least significant digit
Supply Voltage: 100 to 240 Vac, 50/60 Hz
Power Consumption: 5 VA max
Operating Temperature: 0 to 50°C (32 to 122°F)
Memory Backup: Nonvolatile memory
Control Output Ratings:
Relay: SPST, 5A @ 250 Vac resistive
Voltage Pulse: 14 Vdc, 10 to -20% (max 40 mA)
Current: 4 to 20 mA
Communication: RS-485 MODBUS® communication protocol
Panel Cut-Out: 48 mm square (1.89' square) Maximum Panel
Thickness: 9.50 mm (0.375')
Weight: 114 g (4 oz)
Front Panel Rating: IP66
Rated 5 out of
5
by
Just some guy from
inexpensive, works well.
I use this controller to maintain the temp in a molten salt furnace. With the auto tune it holds a constant temp with minimal over shoot and fast reaction time.
Date published: 2016-03-03
Rated 2 out of
5
by
Mr Z from
Reliability is marginal
Originally had six units, three failed after 1 year. The internal relay contacts became intermittent, one fused in the "on" position. They are only switching 2 amps, and are rated for 5.
Date published: 2017-02-24
Rated 4 out of
5
by
MaryP from
1/16 DIN Temperature Controllers
Product works well and can easily be integrated with most controls systems. The only complaint is that the lead time is often quite long if the items are not in stock.
Date published: 2023-11-06
Rated 2 out of
5
by
MDIAS LLC from
Incorrect controller purchased
Cannot give a good rating becauae I was unable to use this product due to incorrect purchase. I found it difficult to select the correct type of controller on the site.
Date published: 2023-03-12
Rated 5 out of
5
by
oventec from
good price,
works perfec, twe can use for temperature, RH, presu
Date published: 2021-10-16
Rated 5 out of
5
by
John6800 from
Controller features have On/Off and PID Control
Because this controller has both On/Off & PID Control I was able to configure it to my oven.
Date published: 2018-03-28
Rated 5 out of
5
by
Bobble from
Great Service
Bought this recently and pleased that I did, it performs as advertised.
Date published: 2017-10-26
Rated 5 out of
5
by
Nare from
Amazing little control marvel
Great product with the right features. It does just what I need from a proportional control
Date published: 2017-02-23
RoHS 2015/863 - View Certificate
CE Approved
UL cULus Listed
Can this model be used for over-temperature protection?
Hi Kathy,
The CN743 would not be recommended for use as a limit controller. The CN2516-R1 would be a 1/16 DIN size controller that would be suited for use as an over-temperature limit controller. It has the ability to latch which is what you'll want as a feature in a true limit controller.
Date published: 2021-09-13
Can you please share connection for CN743 with out SSR? I need to connect it with out using SSR. Please share the power supply connection for this.
Thank you for your inquiry. Due to this being a more complicated issue please call 1-888-826-6342, ask for Temperature Engineering or send an email to temp@omega.com
Date published: 2023-06-09
Does CN740 comes with mounting bracket?
Thank you for your inquiry. The mounting bracket is included.
Date published: 2023-11-22
I would like to speak with a technical rep regarding the operation of the CN74-3 temp controller. I am Working from Home (WFH). I do not have controller in front of me (located 34 miles from here).
Thank you for your inquiry. Feel free to call our Temperature Group at 1-888-826-6342 to discuss application. We are available until 6:30 EST
Date published: 2021-09-13
Does cn743 model comply with REACH and RoHS ?
Thank you for your inquiry. Unfortunately this product does not comply with RoHS and/or REACH.
Date published: 2022-07-07
Does CN743 require SSR? Can you please explain connection in video? By the Data file i can not understand the connections.
Thank you for the inquiry. The answer will depend on if your load pulls over the maximum current rating for the CN743's relay, which is 5 Amps. If your load pulls under 5 Amps, you will not require an SSR.
Date published: 2023-06-09
Is this controller compatible with an M12 connector?
Thank you for your inquiry. Unfortunately, we do not sell any controller that is compatible with M12 connectors.
Date published: 2023-03-10
Does CN 743 PID Control the temperature it self? What will be the out put at 1 and 2? Does 1 and 2 are able to heat my heating element?
There is a SPST relay between terminals 1 and 2 rated at 5 Amps for 250 VAC which can switch the Voltage to your Heater when wired correctly.
Date published: 2023-10-20
Accessories
Noise Suppression RC snubber (2 leads), 110 to 230 Vac for mechanical relay models driving AC contactors or solenoids
$49.88
193 In Stock
