Call us at 1-888-826-6342
Series DHC Digihelic® Differential Pressure Controller
Differential pressure controller, range 0.25 in w.c.
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- One instrument saves inventory, installation time, and money with its measurement versatility and innovative 3-in-1 design
- Measurement precision via full-scale accuracy of 1.5% or better on extremely low ranges, and 0.5% for ranges at or above 1
- Safe and secure with security menu programming
- Simplified field upgrade to DHC pressure controller with optional stainless steel bezel
DHC-002 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Pressure Range
Accuracy value
Pressure Type
Pressure Port Type
Pressure Port Size
Power Source
Accuracy Class
Number Of Digits
Electrical Output
Output Signal
Alarm Types (DC/AC)
Additional Features
- Weight 8.8 oz (250 g).
- Output Signal 4-20 mA (4-wire)
- Pressure Limits Ranges > 1 in w.c.: 6 psi max operation
- Service Air and non-combustible
- Temperature Limits -4 to 158°F (-20 to 70°C).
- Zero and Span Adjustments Accessible via menus.
- Accuracy ±0.5% FSO for all ranges
- Display Backlit LCD display
- Electrical Connections 15 pin male high density D-sub connection. 18" (46 cm) cable with 15 conductors included.
- Enclosure Rating NEMA 4X (IP66).
- Mounting Orientation Not position sensitive.
- Power Consumption 3 VA max.
- Power Requirements 12-28 VDC or 12-28 VAC 50 to 400 Hz.
- Size 5" OD (127 mm) x 1.9" (48 mm) deep.
- Wetted Materials Consult factory.
- Communication BACnet MS/TP or Modbus® RTU.
- Device Load 1/8 unit load.
- Compliance BTL
- Housing Material Polycarbonate.
- Process Connections 1/8" female NPT ports on side and back.
- Response Time 400 ms (damping set to 0).
- Supported Baud Rate 9600
- Thermal Effects 0.02% FS / °F (.036% FS / °C).
The Series DHC Digihelic® Differential Pressure Controller is a 3-in-1 instrument possessing a digital display gage, control relay switches, and a transmitter with both current and voltage outputs. Combining these 3 features allows the reduction of several instruments with one product, saving inventory, installation time, and cost. The Series DHC Digihelic® differential pressure controller is the ideal instrument for pressure, velocity, and volumetric flow applications reading in several commonly used engineering units with optional unidirectional or bidirectional ranges. These units achieve a 1.5% or better accuracy on extremely low ranges, and 0.5% accuracy for ranges at or above 1 in w.c. Calibration can be performed in the field, making maintaining its accuracy more manageable. Additionally, the Series DHC Digihelic® differential pressure controller includes 2 SPDT control relays with adjustable deadbands. Programming the unit is simple using the built-in menu. With scalable 4-20 mA, selectable voltage process outputs, and selectable Modbus® or BACnet communication, this controller can easily fit into your application.
Product Applications
- SCFM duct flow
- Filter status
- Duct or building static pressure
- Damper and fan control
Rated 4 out of
5
by
JustinG from
Replacement controller
Recommended replacement for obsolete instrument. Arrived promptly and in good condition.
Date published: 2024-08-12
