Call us at 1-888-826-6342
Self-Adhesive Polyimide Fast Response Surface Thermocouples - Highest Temp
Surface Thermocouple High or Low Temperatures! Self Adhesive or Cement-On! Super Fast Response All the Time!
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | $236.37 |
| 10-24 | $224.55 |
| 25-99 | $212.73 |
| 100-499 | $200.91 |
| 500-999 | $189.10 |
| 1000+ | $177.28 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Sold in Packs of 5 Economically Priced
- Stocked in 1, 2, and 3 m (40, 80, and 120') Lengths
- Custom Lead Lengths Available
- Available in J, K, T, and E Calibrations
SA1XL-J-SRTC-SB Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Thermocouple Type
Process Temperature Range
Termination Connection Type
Cable Length
Color Code Standard
Features
Category
Sensor Application
Cable Insulation
Mounting Style
Probe Diameter
OMEGA introduces the next generation of our fast response surface mount thermocouples. The new SA1XL surface thermocouple achieves response times of less than 0.15 seconds. These surface thermocouples are constructed using a Polyimide/ fiberglass junction insulation along with a fiberglass-insulated lead wire.
For more demanding applications, Stainless Steel Overbraid is available; add "-SB" option to part number. Consult Sales for pricing, or se
e the Product Specs PDF.
The SA1XL can be used as a self-adhering thermocouple for temperatures up to 260°C (500°F) or it can be cemented in place for use at temperatures up to 315°C (600°F).
Dimensions:
Patch length: 1.0” (25 mm)
Patch Width: 0.375” (9.5 mm)
Strip length 1” (25 mm) with 0.5” (12.5 mm) bare wire
View the Thermocouple Accuracy and Color Code charts
For more demanding applications, Stainless Steel Overbraid is available; add "-SB" option to part number. Consult Sales for pricing, or se
e the Product Specs PDF.
The SA1XL can be used as a self-adhering thermocouple for temperatures up to 260°C (500°F) or it can be cemented in place for use at temperatures up to 315°C (600°F).
Dimensions:
Patch length: 1.0” (25 mm)
Patch Width: 0.375” (9.5 mm)
Strip length 1” (25 mm) with 0.5” (12.5 mm) bare wire
View the Thermocouple Accuracy and Color Code charts
Rated 2 out of
5
by
TestEngineer from
Quality of product has dropped in recent years
Having issues similar to those described by other users with units DOA. We have utilized this product for years (20-100 units/year) with little to no issues. We had been satisfied with the build quality and the ability to reuse these units several times if carefully applied/removed (5 stars), but within the last 1-2 years we have started to receive units that have been DOA (plug them in out of the box before even installing or removing adhesive backing, with no readout).
The 5-packs that we are now receiving generally have 1-2 units DOA (you're lucky if this is discovered out of the box rather than after spending time installing it), not sure how this could be seen as acceptable, especially if a simple "These were received DOA" from the customer does not result in shipping of functional replacement units as long as the DOA units are returned. I have already sent back some of the bad units with a similar response from Omega indicating that a "full evaluation" would be performed. I received no additional information following the return of the units.
Please Omega, revert back to whatever manufacturing process you were utilizing prior to these issues arising.
Date published: 2019-09-09
Rated 3 out of
5
by
GPSKGF from
Worked well - when they worked
I bought 20 of these and they generally worked well. However, 4 of them did not function. The adhesive was good enough, but I wish it was stronger.
Date published: 2018-06-27
Rated 2 out of
5
by
vacman from
Something has changed......
The sample used to work great, had some robustness and never failed out of the box. in the last two years I've had to move away from using this product due to out of the box failures, the TC themselves becoming very fragile or early failures.
Date published: 2019-10-29
Rated 1 out of
5
by
technician17 from
ehh
Received first set and 3 of 5 didn't work immediately straight out of packaging would get no reading on meter. other two proceeded to break and come apart soon there after. Received 5 probes in replacement very easily however one of these didn't work fresh out of the box also. wouldn't order these again.
Date published: 2018-06-01
Rated 2 out of
5
by
Brandon from
Too Fragile
We have ordered several packs of these thermocouples and even taking the most care we can to not damage them during installation, at least 1 of 5 does not work after it is installed. There seem to be some that do not work right out of the box, even before the tape is removed from the adhesive strip (so apparently these came from the factory not working). This product is ideal for a lot of what we do but we are frustrated with the high rate of product failure before use.
Date published: 2018-04-02
Rated 5 out of
5
by
KP KP from
Great for Temperature Mapping
Great for Temperature Mapping Great for Temperature Mapping
Date published: 2024-09-13
Rated 3 out of
5
by
Danial Jackson from
Great product but so overpriced!
Great product but so overpriced!
They don't even update charging ports and sell equipment that was cheap to manufacturer 10+ years ago for unbelievably high prices.
Great software so still, I keep buying it. But it's always on the company card due to my career. I'd buy something cheaper if it was my money.
Date published: 2024-08-31
Rated 5 out of
5
by
Ian B from
Good Thermocouple for Assorted Applications
Durable and plenty accurate for our purposes. Self-adhesive makes for very convenient application to whatever surface you need to monitor.
Date published: 2023-09-25
Are there any UL approvals associated with the thermocouple/cable/connector? There are no listings in the data-sheet.
Thank you for your inquiry. This thermocouple does not have any UL approvals.
Date published: 2024-10-01
Referring to Omega Publication https://assets.omega.com/pdf/test-and-measurement-equipment/temperature/sensors/thermocouple-probes/tc_colorcodes.pdf What is the IEC tolerance class of the SA1XL-KI ? I want to know the accuracy.
Hi KM101
Thank you for the inquiry. The SA1XL-KI will follow the ANSI SLE and EN 60584-2 Tolerance Class 1.
Best regards
OMEGA
Date published: 2022-03-01
What is the accuracy of temperature measurement?
Thank you for your inquiry heasealina. SA1XL-E has an accuracy of +/- 1.0°C or 0.4%, whichever value is greater. For more information please review this link: https://assets.omega.com/pdf/test-and-measurement-equipment/temperature/sensors/thermocouple-probes/tc_colorcodes.pdf
Date published: 2022-08-12
We kindly want to verify SA1XL sensor: 1. the compatibility with the wireless receiver/transmitter known as "UW series compact wireless thermocouple/RTD transmitter"; and 2. can it be used several times on different surfaces?
Thank you for your inquiry. This sensor is compatible with the UW Series. These sensors are single-use. You can purchase TAP adhesive labels to re-attach sensors.
Date published: 2020-10-09
Ordering a quanity of 1 equals 5 complete thermocouples, Right?
Hi, you are correct. For this product, QTY 1 = a 5-Pack. Please reach out anytime if you have any further questions. Thank you.
Date published: 2019-04-26
If I use a SA1XL-K with connectors HMPW-K-M & F to TC wire TT-K-24S-TWSH can I consider the entire error to be ±2.2°C or 0.75% even with a differential temperature across the connector? Does the SLE of the SA1XL-K mean the metal alloy is different?
The SA1XL is SLE Special Limits of Error +/- 1.1C or 0.4% of reading and the wire is Standard Limits of Error +/- 2.2C or 0.75% of reading. The connector would not have a differential across it and is considered an isothermal connection. The Thermocouple is made by the connection of the 2 dissimilar metals generating a precise millivolt signal relative to a temperature. The entire system error without checking it's calibration would be additive of the Thermocouple and wires accuracy specification.
Date published: 2024-06-27
It appears from the "ALL MODELS" list that the only type available with self-adhesive is a Type-T. All others (J, K, & E) are listed as "Cement On" only. Is that correct?
Thank you for your inquiry. All types have are self-adhesive. The J,K & E can be used with cement to go to elevated temperature. Type T cannot.
Date published: 2021-05-17
What is the gauge of the cable wire?
Thank you for your inquiry. The gauge of the cable wire is 30 AWG.
Date published: 2020-04-06
