text.skipToContent text.skipToNavigation

Configure Product
Saved Configuration
View Configuration
Terms and Conditions
Saved Addresses
Please validate your credit card and billing information.
Payment submission timed out. The server might be busy.
There was an error processing your request.
Please validate your credit card and billing information.
Please enter a card number
Please select a card type
Please enter a value for this field
Please enter first name
Please enter last name
Please enter a zipcode
Please enter an expiry month
Please enter an expiry year
Please enter an issue number
Please enter a start month
Please enter a start year
The card number is not valid
The card type is not supported
The card verification code is not valid
Zipcode is not valid
The expiry month is not valid
The expiry year is not valid
The issue number is not valid
The start month is not valid
The start year is not valid
This field is required
Errors were found with the address you provided. Please verify your address.
Date should be in MM/DD/YYYY format
Please enter valid values
Please enter future date
Please enter the shipping date
Shipment date is updated
Required Fields Missing or incorrect.
Required Fields Missing or incorrect.
We're sorry, there was an issue with your credit card, please try another form of payment.
We're sorry, something went wrong on our side, please try again later or contact Customer Service.
We're sorry, something went wrong on our side, please contact Customer Service to avoid duplication.
We're sorry, something went wrong on our side, please contact Customer Service to avoid duplication.
Please confirm that you have entered the correct information for this credit card number.
We're sorry, there was an issue with your credit card, please contact your issuing bank.
This card is expired, please update the information or try another card.
We're sorry, there was an issue with your credit card, please try another form of payment.
We're sorry, there was an issue with your credit card, please try another form of payment.
We're sorry, there was an issue with your credit card, please try another form of payment.
We're sorry, we're having trouble contacting your bank. Please try again later.
We're sorry, there was an issue with your credit card, please try another form of payment.
We're sorry, there was an issue with your credit card, please try another form of payment.
We're sorry, there was an issue with your credit card, please try another form of payment.
Required Fields Missing or incorrect.
We're sorry, there was an issue with your credit card, please try another form of payment.
We're sorry, there was an issue with your credit card, please try another form of payment.
We're sorry, there was an issue with your credit card, please try another form of payment.
Please confirm that you have entered the correct information for this credit card number.
Required Fields Missing or incorrect
We're sorry, there was an issue with your credit card, please try another form of payment.
We're sorry, there was an issue with your credit card, please try another form of payment.
We're sorry, something went wrong on our side, please try again later or contact Customer Service.
We're sorry, we're having trouble contacting your bank. Please try again later.
Required Fields Missing or incorrect.
We're sorry, something went wrong on our side, please contact Customer Service to avoid duplication.

Portable High Accuracy Multifunction Calibrator

$2,415.00

Item# PCL1200

Volume discounts available
Volume Discount Schedule
Quantity Price each
1-4 $2,415.00
5-9 $2,294.25
10-24 $2,245.95
25-49 $2,149.35
50-99 $2,101.05
100+ $2,052.75

In stock

Lead Time ( If not in Stock): 6 weeks

Portable High Accuracy Multifunction Calibrator PCL1200 PCL1200
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 159ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
  • Measures and Sources T/C (13 Types), RTDs (13 Types), Ohms, Current, Voltage, Frequency
  • Sources Pulse Trains
  • Isolated mA/V Readback Circuit for Complete Transmitter Calibration
  • Pressure Module Communication Port Compatible with OMEGA
    PCL-PM Series Pressure Modules
  • Built-In 24 V Supply Can Drive 4 to 20 mA Loops Up to 1000 Ohms
  • Direct Entry of Custom RTD Coefficients (R0, A, B, C)
  • All Source Modes Can be Programmed with Dedicated Setpoints to Speed Calibration and Linearity Tests
  • Highest Accuracy in Classشo 0.015% of Reading
  • Meets CE Requirements and is Designed to IEC 1010 Safety Standards
  • Supplied with Full Rubber Boot
5 Year Warranty

Product info

Display Type
Backlit
Input Type
Current, Voltage, Thermocouple, RTD, Ohms, Frequency
Features
Standard

Product Specs

  • Batteries Included Yes
  • Battery Size AA
  • Battery Type Alkaline
  • Power Source Battery
  • Rechargeable Battery Optional
  • Number of Batteries 4
  • Supply Voltage 6 Vdc

The PCL1200 multifunction calibrator has a feature set unmatched by other high-accuracy handheld calibrators in its price range. It is portable, provides the functions and accuracy of a laboratory-grade instrument, and has everything needed for virtually any calibration task. It can also measure and source thermocouples, RTDs, current, voltage, and frequency, and it can source pulse trains. It has a communications port for pressure modules and an isolated mA/V readback circuit. Arrow keys, direct numeric keypad entry, and 3 software-driven function buttons combine with a large, backlit, menu-driven graphics display to provide a highly intuitive yet powerful interface. A built-in 250 Ohm resistor for HartTM compatibility, compatibility with smart transmitters and PLCs, full fuseless protection, and a serial communications port for control using ASCII commands are additional features that make the PCL1200 indispensable for calibration tasks. A protective rubber boot is included with each unit.

Measuring Pressure with the PCL1200 With a PCL-PMA pressure module adaptor, the PCL1200 will work with all OMEGA PCL-PM pressure modules. See Specs and 'To Order' chart.

SPECIFICATIONS (23 ±5°C Unless Otherwise Noted)
Voltage Read and Source:
Source: 0 to 20 Vdc
    Read:
        Isolated: 0 to 30 Vdc
        Non-Isolated: 0 to 20 Vdc
Thermocouple mV:
    Read/Source: -10 to 75 mV
Current (mA):
Source: 0 to 24 mA
    Read:
        Isolated: 0 to 24 mA
        Non-Isolated: 0 to 24 mA
Frequency (1 to 20 V Selectable Amplitude):
    cpm Source/Read: 2 to 600 cpm
    Hz Source/Read: 1 to 1000 Hz
    kHz Source/Read: 1 to 10 kHz
Pulse (Source Only; 1 to 20 V Selectable Amplitude): 1 to 30,000 pulses; 2 cpm to 10 kHz
Ohms:
    Source: 5 to 4000 O
    Read: 0 to 4000 O
Thermocouple Read and Source:
    Type J: -200 to 1200°C (-328 to 2192ºF)
    Type K: -200 to 1370°C (-328 to 2498ºF)
    Type T: -200 to 400°C (-328 to 752ºF)
    Type E: -200 to 950°C (-328 to 1742ºF)
    Type R: -20 to 1750°C (-4 to 3182ºF)
    Type S: -20 to 1750°C (-4 to 3182ºF)
    Type B: 600 to 1800°C (1112 to 3272ºF)
    Type C: 0 to 2316°C (32 to 4201ºF)
    Type XK: -200 to 800°C (-328 to 1472ºF)
    Type BP: 0 to 2500°C (32 to 4532ºF)
    Type L: -200 to 900°C (-328 to 1652ºF)
    Type U: -200 to 400°C (-328 to 752ºF)
    Type N: -200 to 1300°C (-328 to 2372ºF)
RTD Read and Source:
    Ni120 (672): -80 to 260°C (-112 to 500ºF)
    Pt100 (385): -200 to 800°C (-328 to 1472ºF)
    Pt100 (3926): -200 to 630°C (-328 to 1166ºF)
    Pt100 (3916): -200 to 630°C (-328 to 1166ºF)
    Pt200 (385): -200 to 630°C (-328 to 1166ºF)
    Pt500 (385): -200 to 630°C (-328 to 1166ºF)
    Pt1000 (385): -200 to 630°C (-328 to 1166ºF)
    Cu10: -100 to 260°C (-148 to 500ºF)
    YSI400: 15 to 50°C (59 to 122ºF)
    Cu50: -180 to 200°C (-292 to 392ºF)
    Cu100: -180 to 200°C (-292 to 392ºF)
    Pt385-10: -200 to 800°C (-328 to 1472ºF)
    Pt385-50: -200 to 800°C (-328 to 1472ºF)


Environmental
Operating Temperature: -10 to 50°C (14 to 122ºF)
Storage Temperature: -20 to 70°C (-4 to 158ºF)
Stability: ±0.005% of reading/°C (±5°C outside of 23°C)
Power Requirement: 6 Vdc
Batteries: 4 'AA' alkaline (included) or optional rechargeable
Mechanical
Dimensions: 220.9 H x 106.6 W x 58.4 mm D (8.7 x 4.2 x 2.3')
Weight: 863 g (30.5 oz)
Optional Accessory: Carrying case (Model No. CC572)
Accuracy Voltage: ±0.015% of reading, ±2 mV
Thermocouple: mV ±0.02% of reading, ±10 µV
Thermocouple Errors (In °C; Add 0.2 for Cold-Junction Compensation Error)
RTD Read/Source:
    Type J: 0.2°C Ni120 (672) 0.2°C
    Type K: 0.3°C Pt100 (385) 0.2°C
    Type T: 0.2°C Pt100 (3926) 0.2°C
    Type E: 0.2°C Pt100 (3916) 0.2°C
    Type R: 1.2°C Pt200 (385) 0.8°C
    Type S: 1.2°C Pt500 (385) 0.4°C
    Type B: 1.2°C Pt1000 (385) 0.2°C
    Type C: 0.6°C Cu10 1.4°C
    Type XK: 0.2°C YSI400 0.1°C
    Type BP: 0.9°C Cu50 0.4°C
    Type L: 0.2°C Cu100 0.3°C
    Type U: 0.25°C Pt385-10 1.4°C
    Type N: 0.4°C Pt385-50 0.4°C
Read Source:
    Current (mA): ±0.015% of reading, ±2 µA ±0.015% of reading, ±2 µA
    cpm: ±0.05% of reading, ±1 LSD ±0.05% of reading
    Hz: ±0.05% of reading, ±1 LSD ±0.05% of reading
    kHz: ±0.05% of reading, ±1 LSD ±0.125% of reading
Ohms (Works with All Pulsed Transmitters Down to 5 ms):
400 Ω Range: ±0.025% of reading, ±0.05 Ω ±0.025% of reading, ±0.05 Ω
4000 Ω Range: ±0.025% of reading, ±0.5 Ω ±0.025% of reading, ±0.5 Ω

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 21ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Does PCL1200 calibrator include any calibration certificate? Are noted in standard calibration certificate, that instruments used for  calibration are NIST Traceable?

Asked by: Malkhaz
Malkhaz, thank you for contacting Omega Engineering. No this unit will cot come with a calibration certificate. "NIST traceable calibration is an assurance program that certifies that a laboratory or manufacturer is fully equipped to calibrate equipment to National Institute of Standards and Technology (NIST) standards and that any products offered by that manufacturer will match those NIST-maintained measurement standards" Your lab and other equipment will have to meet national standards in order for you to ensure that it meets NIST standards. Thank you.
Answered by: SAE DVJ
Date published: 2019-09-27
  • y_2019, m_11, d_13, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_PCL1200, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_omega
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 173ms
  • QUESTIONS, PRODUCT
Product Number
Description
Price
 
High accuracy Multi-Function Calibrator
$1,005.00
1 In Stock
  • CE Icon CE

en-US
en
Save Configuration