text.skipToContent text.skipToNavigation

If you have previously used the Omega Website, you will need to Reset your Password on the new site.
Resetting your password is required one time only.

Configure Product
Saved Configuration
View Configuration
Terms and Conditions
Saved Addresses
Your card information was not accepted. Please contact the issuing bank for details.
Payment submission timed out. The server might be busy.
There was an error processing your request.
Please verify there are no missing or invalid fields.
Please enter a card number
Please select a card type
Please enter a value for this field
Please enter an expiry month
Please enter an expiry year
Please enter an issue number
Please enter a start month
Please enter a start year
The card number is not valid
The card type is not supported
The card verification code is not valid
The expiry month is not valid
The expiry year is not valid
The issue number is not valid
The start month is not valid
The start year is not valid
This field is required
Errors were found with the address you provided. Please verify your address.
Date should be in MM/DD/YYYY format
Please enter valid values
Please enter future date
Please enter the shipping date
Shipment date is updated

Laboratory-Grade Benchtop Closed Loop Wind Tunnel

Item# WT-3115

Laboratory-Grade Benchtop Closed Loop Wind Tunnel Laboratory-Grade Benchtop Closed Loop Wind Tunnel
The WT-3115 is a research-qualityclosed loop wind tunnel thatprovides a convenient, accuratesystem for thermally characterizingPCBs and individual components atelevated temperatures from ambientto 85°C (185ºF).The WT-3115 wind tunnel producesair flows up to 5 m/s (1000 ft/min).With customization, it can generateflows up to 50 m/s (10,000 ft/min)using orifice plates (availableoptionally). The clear polycarbonatetest section lets the user view thetest specimen and allows forflow visualization.Unlike open loop wind tunnels, theWT-3115 recirculates internal air.This allows the system heater torapidly warm the air to a specifictemperature. The testing of boardsand components in hot air is arequirement in some NEBS andother standards. The precisecontrols and temperature rangeof the WT-3115 wind tunnel allowsits use for testing heat sinkperformance and for calibratingair and temperature sensorsThe complete wind tunnel fits onmost lab benches and is poweredfrom standard AC outlets. It has asmaller footprint than traditional,closed loop wind tunnels orenvironmental test chambers.The WT-3115 is provided with acontroller for controlling the flow andtemperature in the wind tunnel. Thecontroller comes with a graphicaluser interface to automate the windtunnel operation.The WT-3115 test section can beaccessed from the top door or sidesfor mounting and repositioning ofboards, components and sensors.Internal rail guides provide an easymechanism to install test specimensof different sizes (e.g., PCB,heat sink).Instrument ports (6) are providedin the side walls of the test sectionfor placing temperature andvelocity sensors such asthermocouples, pitot tubesand hot-wire anemometers.
WT-3115
  • Quick Access Panel
  • Sensor Ports (6)
  • Wind Tunnel Controller
  • High Quality Flow, Low Turbulence
  • Applications
  • High Temperature Testing
  • Heat Sink Characterization
  • Sensor Calibration
  • Component Testing
  • Aerodynamic and Pressure Drop Measurement
  • Multiple Pcb Testing
Flow Rate
Supply Voltage
Weight
Quantity Price each
1-4 $43,795.00
5-9 $42,919.10
10-24 $42,043.20
25-49 $40,291.40
50-99 $39,853.45
100+ $39,415.50

In stock

Lead Time ( If not in Stock): 12 weeks

Product Specs

  • Flow Accuracy ±2%
  • Flow Rate 0 to 5 m/s (0 to 1000 ft/min)
  • Flow Uniformity ±1%
  • Power Source 20 Amps
  • Number of Ports 6
  • Test Chamber Dimensions 77.6 L x 26 W x 11.6 cm H (30.5 x 10.2 x 4.5")

The WT-3115 is a research-qualityclosed loop wind tunnel thatprovides a convenient, accuratesystem for thermally characterizingPCBs and individual components atelevated temperatures from ambientto 85°C (185ºF).The WT-3115 wind tunnel producesair flows up to 5 m/s (1000 ft/min).With customization, it can generateflows up to 50 m/s (10,000 ft/min)using orifice plates (availableoptionally). The clear polycarbonatetest section lets the user view thetest specimen and allows forflow visualization.Unlike open loop wind tunnels, theWT-3115 recirculates internal air.This allows the system heater torapidly warm the air to a specifictemperature. The testing of boardsand components in hot air is arequirement in some NEBS andother standards. The precisecontrols and temperature rangeof the WT-3115 wind tunnel allowsits use for testing heat sinkperformance and for calibratingair and temperature sensorsThe complete wind tunnel fits onmost lab benches and is poweredfrom standard AC outlets. It has asmaller footprint than traditional,closed loop wind tunnels orenvironmental test chambers.The WT-3115 is provided with acontroller for controlling the flow andtemperature in the wind tunnel. Thecontroller comes with a graphicaluser interface to automate the windtunnel operation.The WT-3115 test section can beaccessed from the top door or sidesfor mounting and repositioning ofboards, components and sensors.Internal rail guides provide an easymechanism to install test specimensof different sizes (e.g., PCB,heat sink).Instrument ports (6) are providedin the side walls of the test sectionfor placing temperature andvelocity sensors such asthermocouples, pitot tubesand hot-wire anemometers.

en-US
en
Save Configuration