Call us at 1-888-826-6342
Panel Punches & Hole Saws for Temperature Connectors & DIN Meters
Panel Punches and Hole Saws for Thermocouple Connectors, DIN Size Controllers and Panel Meters
- DIN Size Panel Punches - DPP Series
• 1/32, 3/64, 1/16, 1/16 Square, 1/8 and 1/4 DIN Sizes
• Will Accept any Standard DIN Size Controllers and Panel Meters
• Will Cut a Clean Hole in up to 11 Gage (.090) Aluminum or up to 14 Gage (.075) Mild Steel - Rectangular Hole Punches - CP Series
• Rugged Industrial Design
• Square Corners
• Sizes to Mount All OMEGA Connectors
• Keyed Design Assures Alignment of Punch and Die
• Simply Drill a Pilot Hole and Then Punch Out the Exact Shape for Your Connector
• For panels up to 1.5mm (0.06") Thick - Round Hole Punches - RHS and RHP Series
• No Reaming or Filing
• 6.35 mm (1/4") or 9.52 (3/8") Pilot Hole
• Exact Size for RMJ and RSJ Connectors - Hole Saws - RS Series
• For Panels Over 3 mm (1/8")Thick
• Replaceable Blades
• 6.35 mm (1/4") Pilot Drill
CP-1 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Pilot Hole Size
Cutout Height
Cutout Width
Tool Type
Diameter
Panel Punches
The panel punches are designed to create panel cut outs for OMEGA's family of thermocouple connectors. Three styles of panel punches are available. The CP series is for rectangular connectors, the RHS is for round connectors and the DPP are DIN sized panel punches.
RHS Hole Saws
Use your hand drill or drill press to fabricate jack panels with hole saws and around hole connectors. When the plate is too thick for punches, the saw is the solution. Complete assembly including saw, pilot drill, and mandril.
The panel punches are designed to create panel cut outs for OMEGA's family of thermocouple connectors. Three styles of panel punches are available. The CP series is for rectangular connectors, the RHS is for round connectors and the DPP are DIN sized panel punches.
RHS Hole Saws
Use your hand drill or drill press to fabricate jack panels with hole saws and around hole connectors. When the plate is too thick for punches, the saw is the solution. Complete assembly including saw, pilot drill, and mandril.
| Model Type | Model No. | Cutout Dimensions mm (in) | Designed For |
| Rectangular Connectors | CP-1 | 8.1 x 16.8 (.318 x .661) | SMP, SMPW |
| CP-2 | 9.5.1 x 16.7 (.375 x .656) | NMP | |
| CP-3 | 13.5 x 26.2 (.531 x 1.031) | OST, OGP NOX, OSTW | |
| CP-4 | 13.1 x 36.8 (.516 x 1.450) | OTP | |
| CP-5 | 16.1 x 30.4 (.635 x 1.195) | JP, SPJ, UPJ | |
| CP-6 | 16.1 x 41.4 (.635 x 1.630) | TPJ | |
| CP-7 | 16.4 x 26 (.646 x 1.024) | NHX | |
| CP-8 | 9.9 x 19.4 (.390 x .765) | SHX | |
| DIN Size Panel Punches | DPP-1 | 22.2 x 45 (.874 x 1.772) | 1/32 DIN |
| DPP-2 | 22.2 x 68 (.874 x 2.677) | 3/64 DIN | |
| DPP-3 | 22.2 x 92 (.874 x 3.622) | 1/16 DIN | |
| DPP-4 | 45 x 45 (1.772 x 1.772) | 1/16 DIN Square | |
| DPP-5 | 45 x 92 (1.772 x 3.622) | 1/8 DIN | |
| DPP-6 | 92 x 92 (3.622 x 3.622) | 1/4 DIN | |
| Round Connectors | RHS-43 | 43 (1 11/16) Diameter | CN77R3 & R5 Panel Meters |
| RHP-58 | 15.87 (.625) Diameter | RMJ | |
| RHP-78 | 22.22 (.875) Diameter | RSJ | |
| RHS-58 | 15.87 (.625) Diameter | RMJ | |
| RHS-78 | 22.22 (.875) Diameter | RSJ | |
| RS-58 | 15.87 (.625) Diameter | RMJ | |
| RS-78 | 22.22 (.875) Diameter | RSJ |
