text.skipToContent text.skipToNavigation

If you have previously used the Omega Website, you will need to Reset your Password on the new site.
Resetting your password is required one time only.

Configure Product
Saved Configuration
View Configuration
Terms and Conditions
Saved Addresses
Your card information was not accepted. Please contact the issuing bank for details.
Payment submission timed out. The server might be busy.
There was an error processing your request.
Please verify there are no missing or invalid fields.
Please enter a card number
Please select a card type
Please enter a value for this field
Please enter an expiry month
Please enter an expiry year
Please enter an issue number
Please enter a start month
Please enter a start year
The card number is not valid
The card type is not supported
The card verification code is not valid
The expiry month is not valid
The expiry year is not valid
The issue number is not valid
The start month is not valid
The start year is not valid
This field is required
Errors were found with the address you provided. Please verify your address.
Date should be in MM/DD/YYYY format
Please enter valid values
Please enter future date
Please enter the shipping date
Shipment date is updated

Master Controller for CS Series Control Modules

Item# CSMSTRV2

Master Controller for CS Series Control Modules Master Controller for CS Series Control Modules
The Model CSMSTRV2 is a communications and control platform designed for use with CS Series process control modules. The CSMSTRV2 uses a proprietary high speed serial protocol to communicate, via backplane connection, with up to 16 control modules, providing PID control of any process including temperature and pressure. Connect up to 16 Dual-loop PID control modules for process control of 32 independent zones. PID temperature modules also allow up to 32 ramp/soak segments per zone. The Master provides high-speed RS232/422/485 communication ports and an Ethernet port for connection to PCs and motion controllers. An extensive list of master and slave protocol drivers are available, including a serial driver for Omega stepper motors, to allow the CSMSTRV2 to share and exchange variable data with external devices. The 10 Base-T/100 Base-TX Ethernet port can also be used to connect and share data with other devices at high speeds.

The CSMSTRV2 is programmed with Crimson software for Windows® 2000 or later platforms. The software is an easy to use, graphical interface which provides a means of communication configuration, as well as commissioning and calibration of new systems.

CSMSTRV2
  • Provides PID Process Controls Without a PLC (PID Control Modules Required)
  • Supports up to 32 Independent PID Loops with Ramp/Soak
  • Extensive Built-In Driver List Allows Easy Data Mapping to PLCs and Motion Controllers
  • 10 Base-T/100 Base-Tx Ethernet Connection Provides Networking Capability: Runs 4 Ethernet Protocols Simultaneously
  • Easy Control of Omega Stepper Motors and Drives (STM Series, 1240i, 3540i, ST Series, STAC6)
  • Easy-To-Use, Graphical Interface, Crimson 3.0 Software Included
  • DIN Rail Mounting, Space Saver Package
Number of Digital Inputs/Outputs
Number of Analog Inputs/Outputs
Quantity Price each
1-4 $383.00
5-9 $363.85
10-24 $344.70
25-49 $325.55
50-99 $306.40
100+ $287.25

In stock

Lead Time ( If not in Stock): 2 weeks

Product Specs

  • Form Factor Snaps onto standard DIN style top hat (T) profile mountingrails according to EN50022 -35 x 7.5 and -35 x 15
  • Capacitance 24 AWG to 12 AWG
  • Baud Rate up to 115
  • Maximum Ambient Temperature 50 {C} (122{F})
  • Maximum Ambient Humidity 80% RH
  • Maximum Storage Temperature 70 {C} (158 {F}
  • Memory Capacity 4 Mb of non-volatile flash memory
  • Minimum Ambient Temperature 0 {C} (32 {F})
  • Minimum Storage Temperature -30 {C} (-22{C})
  • Supply Voltage 24 Vdc

The Model CSMSTRV2 is a communications and control platform designed for use with CS Series process control modules. The CSMSTRV2 uses a proprietary high speed serial protocol to communicate, via backplane connection, with up to 16 control modules, providing PID control of any process including temperature and pressure. Connect up to 16 Dual-loop PID control modules for process control of 32 independent zones. PID temperature modules also allow up to 32 ramp/soak segments per zone. The Master provides high-speed RS232/422/485 communication ports and an Ethernet port for connection to PCs and motion controllers. An extensive list of master and slave protocol drivers are available, including a serial driver for Omega stepper motors, to allow the CSMSTRV2 to share and exchange variable data with external devices. The 10 Base-T/100 Base-TX Ethernet port can also be used to connect and share data with other devices at high speeds.

The CSMSTRV2 is programmed with Crimson software for Windows® 2000 or later platforms. The software is an easy to use, graphical interface which provides a means of communication configuration, as well as commissioning and calibration of new systems.

  • CE Icon CE

en-US
en
Save Configuration