text.skipToContent text.skipToNavigation

Configure Product
Saved Configuration
View Configuration
Terms and Conditions
Saved Addresses
Please validate your credit card and billing information.
Payment submission timed out. The server might be busy.
There was an error processing your request.
Please validate your credit card and billing information.
Please enter a card number
Please select a card type
Please enter a value for this field
Please enter first name
Please enter last name
Please enter a zipcode
Please enter an expiry month
Please enter an expiry year
Please enter an issue number
Please enter a start month
Please enter a start year
The card number is not valid
The card type is not supported
The card verification code is not valid
Zipcode is not valid
The expiry month is not valid
The expiry year is not valid
The issue number is not valid
The start month is not valid
The start year is not valid
This field is required
Errors were found with the address you provided. Please verify your address.
Date should be in MM/DD/YYYY format
Please enter valid values
Please enter future date
Please enter the shipping date
Shipment date is updated
Required Fields Missing or incorrect.
Required Fields Missing or incorrect.
We're sorry, there was an issue with your credit card, please try another form of payment.
We're sorry, something went wrong on our side, please try again later or contact Customer Service.
We're sorry, something went wrong on our side, please contact Customer Service to avoid duplication.
We're sorry, something went wrong on our side, please contact Customer Service to avoid duplication.
Please confirm that you have entered the correct information for this credit card number.
We're sorry, there was an issue with your credit card, please contact your issuing bank.
This card is expired, please update the information or try another card.
We're sorry, there was an issue with your credit card, please try another form of payment.
We're sorry, there was an issue with your credit card, please try another form of payment.
We're sorry, there was an issue with your credit card, please try another form of payment.
We're sorry, we're having trouble contacting your bank. Please try again later.
We're sorry, there was an issue with your credit card, please try another form of payment.
We're sorry, there was an issue with your credit card, please try another form of payment.
We're sorry, there was an issue with your credit card, please try another form of payment.
Required Fields Missing or incorrect.
We're sorry, there was an issue with your credit card, please try another form of payment.
We're sorry, there was an issue with your credit card, please try another form of payment.
We're sorry, there was an issue with your credit card, please try another form of payment.
Please confirm that you have entered the correct information for this credit card number.
Required Fields Missing or incorrect
We're sorry, there was an issue with your credit card, please try another form of payment.
We're sorry, there was an issue with your credit card, please try another form of payment.
We're sorry, something went wrong on our side, please try again later or contact Customer Service.
We're sorry, we're having trouble contacting your bank. Please try again later.
Required Fields Missing or incorrect.
We're sorry, something went wrong on our side, please contact Customer Service to avoid duplication.

Modular Signal Conditioning System Accepts a Wide Range of Inputs

$129.00

Item# OM7-30-02-1-C

Volume discounts available
Volume Discount Schedule
Quantity Price each
1-4 $129.00
5-9 $122.55
10-24 $119.97
25-49 $114.81
50-99 $112.23
100+ $109.65

In stock

Lead Time ( If not in Stock): 6 weeks

Modular Signal Conditioning System Accepts a Wide Range of Inputs OM7-30-02-1-C OM7-30-02-1-C
  • Isolated Signal Conditioners for a Wide Range of Process Control Signals: Thermocouples, RTDs, mA, mV, V
  • Best Replacement/Upgrade Model for 7B Devices
  • Process Current (4-20 and 0-20 mA) Output Module
  • Powered mA Input Module Includes Isolated +24 Vdc Power for a Remote Transmitter
  • Bipolar Voltage Input and Output Modules
  • Operates From a Single +24 Vdc Power Supply
  • Provides 1-5 V, 0-10 V, and±10 V Output Options
  • ±0.1% Max. Accuracy, FactoryCalibrated
  • 1500 V rms of CMV Isolation and 120 V rms Field Wiring Protection
  • Compact, 54 x 42 x 14 mm (2.1" x 1.7" x 0.6" ) Plastic Housing

Product info

Input Type
mV
Input Ranges
0 to 100 mV
Output Type
V

Product Specs

As the best replacement/upgrade version for 7B Modles, the OM7 Series modular isolation-based, single channel plug-in signal conditioning system accepts inputs from a wide range of process control transducers and signals while providing high-level output voltages. Featuring a maximum nonlinearity of 0.02% and factory calibrated to guarantee maximum accuracy of ±0.1%, the OM7 Series offers superior performance at a lower cost than multipurpose signal conditioners. The modules provide 1500 V rms isolation and 120 V rms of field wiring input protection. The power supplies necessary to drive each individual module’s input circuitry are internally isolated, enabling the OM7 modules to offer true channel-to-channel isolation of the input signals. The modules are rated for a nominal power supply input of +24 Vdc and, for maximum flexibility, will accept supply voltages in the +14 Vdc to +35 Vdc range.

All modules are packaged in a compact 54 x 42 x 14 mm (2.1" x 1.7" x 0.6") durable plastic case that readily accommodates high channel density applications. Each module may be operated in high humidity (noncondensing) environments and is rated over the extended -40 to 85°C industrial temperature range. All modules feature a simple pinout that allows them to be mixed and matched within a single backplane design. Furthermore, modules are easily serviced since they can be removed and inserted into the backplane with power applied.

Modules are available to isolate and condition the following input signals and transducers: voltage, process current, RTD, 2-wire transmitter, and thermocouples. The 2-wire transmitter interface module (OM7-35) accepts a 4-20 mA process input and provides an isolated +24 Vdc supply to power the current loop. In this way, a loop-powered transmitter can be directly connected to the OM7-35 without requiring a separate power supply. All of the isolated input modules, with the exception of the OM7-21, provide a high-level output voltage that is factory configured for either the 1-5 V or 0-10 V range. The OM7-21 is a unity gain, isolated input module with an input/output range of ±10 V.

Modules are also available that provide isolated output signals for process current and bipolar voltage. The OM7-39 process current module converts either a 1-5 V signal to a 4-20 mA output or a 0-10 V input to a 0-20 mA output. The input/output ranges of the OM7-39 are factory configured. The OM7-22 is a unity gain module that provides an isolated ±10 V output signal.

A full line of backplanes and rack-mount hardware complete the OM7 Series signal conditioning system. Each backplane contains screw terminals for field wiring connections and a miniature cold junction compensation (CJC) thermistor that is installed under the terminal blocks of each channel. Due to the pinout of the OM7 Series modules, the CJC thermistor affects only the thermocouple modules. This flexibility permits any module type to be used in any channel on the backplane.

ISOLATED VOLTAGE AND CURRENT INPUT
The OM7 Series feature five isolated voltage/current input modules capable of addressing a wide variety of input voltage ranges and signal dynamics. The OM7-21 is a bipolar unit module featuring a full-scale range of ±10 V. The OM7-30 and OM7-31 accept dc input voltages and provide either a factory configured 1-5 V or 0-10 V output signal. The OM7-32 accepts a 4-20 mA process current input signal and provides an output voltage signal in the 1-5 V range. The OM7-33 isolates a 1-5 V input signal and provides a buffered 1-5 V output signal. The OM7-32 and OM7-33 can also be factory configured to provide a 0-10 V output signal with a 0-20 mA or 0-5 V input, respectively. Both the OM7-32 and OM7-33 have bandwidths of 100 Hz. The OM7- 30 and OM7-31 are limited to 3 Hz bandwidth.

ISOLATED THERMOCOUPLE INPUT
The OM7-37 and OM7-47 modules accept inputs from types J, K, T, E, R, S, and B thermocouples and provide a 1-5 V or 0-10 V output signal. The OM7-47 also accepts inputs from type N thermocouples. Both the OM7-37 and OM7-47 have a nominal 3 dB bandwidth of 3 Hz, and they provide for upscale open input detection within 10 sec.

In addition to the signal conditioning capabilities of the OM7-37, the OM7-47 includes an internal linearization circuit that compensates for the inherent nonlinearities of the thermocouple. With this linearizer, the OM7-47 is able to provide an output voltage that is linear with respect to the actual temperatures being measured by the thermocouple.

The thermocouple input modules accomplish CJC by means of an external thermistor mounted under the field wiring screw terminal blocks of the backplane.

ISOLATED LINEARIZED RTD INPUT
The OM7-34 module accepts inputs from 100. platinum and 120. nickel RTDs and produce an output voltage signal that is proportional with temperature measured by the RTD. The OM7-34 modules are available in a factory-configured 1-5 V or 0-10 V output range. Three-wire lead resistance compensation is provided and 2- or 3-wire RTDs may be used. The OM7-34 RTD input module has a nominal 3 dB bandwidth of 3 Hz and upscale open RTD detection with 10 sec.

ISOLATED 2-WIRE TRANSMITTER INTERFACE
The OM7-35 input module accepts a 4-20 mA process current input, provides a standard 1-5 V output signal, and features an isolated loop power supply for driving the current transmitter. The module has a nominal 3 dB bandwidth of 100 Hz and offers downscale open input detection within 2 sec.

The isolated transmitter loop power supply of the OM7-35 is unregulated and will provide a voltage that is proportional to the voltage used to power the OM7-35 module. The voltage provided by the OM7-35 is between 13 V and 34 V for loop current between 4 mA and 20 mA and supply voltages between 20.4 and 26.4 V. (For nominal +24 V supply, the OM7-35 will supply approximately +24 V to the loop.)

ISOLATED CURRENT OUTPUT
The OM7-39 isolated output module accepts either a factory-configured 1-5 V or 0-10V input signal and provides an isolated 4-20 mA or 0-20 mA output current signal. The module can drive a wide range of resistive loads, depending upon +Vs, the supply voltage. At a nominal +Vs of +24 V, the OM7-39 will drive up to 850..

ISOLATED BIPOLAR VOLTAGE OUTPUT
The OM7-22 is a unity-gain module with an input/output range of ±10 V. The OM7-22 has an input range of ±10 V and provides an isolated bipolar ±10 V output signal to the field. The OM7-22 features 1500 V rms of CMV isolation, 100 dB minimum of common mode rejection, and a 400 Hz bandwidth.

OM7 Specifications:
OM7 Common Input Module Specifications Common Mode Voltage: 1500 V rms continuous
Input Protection: 120 V rms continuous
Output Protection: Short to ground
Output Resistance: <1 ohm Common to All Modules
Operating Range: -40 to 85°C (-40 to 185°F)
Storage Range: -40 to 85°C (-40 to 185°F)
Humidity (24 hr): 90% non-condensing
WEIGHT: 60 G (0.2 OZ)

OM7 Series Input Module Specifications (typical @23°C and + 24 Vdc)
ModelOM7-21OM7-30OM7-31OM7-32OM7-33OM7-34OM7-35OM7-37OM7-47
Input
Type
±10 V±1 mV
to ±1V
±1 V
to ±10 V
4-20 mA
0-20 mA
1-5 V
0-5 V
RTD4-20 mAT/C*T/C*
Output Range
into 2 kΩ min load)
±10 V1-5 or
0-10 V
1-5 or
0-10 V
1-5 or
0-10 V
1-5 or
0-10 V
1-5 or
0-10 V
1-5 or
2-10 V
1-5 or
0-10 V
1-5 or
0-10 V
Accuracy±0.1%
span max
±0.1%
span max
±0.1%
span max
±0.1%
span max
±0.1%
span max
See table±0.1%
span max
±0.1%
span max
See table
Nonlinearity±0.02%
span max
±0.02%
span max
±0.02%
span max
±0.02%
span max
±0.02%
span max
See table±0.02%
span max
0.02%
span max
N/A
Input Resistance2 MΩ10 MΩ100 kΩ200 Ω2 MΩN/AN/A10 MΩ10 MΩ
Input Bias Current3 nA1 nA0.2 nAN/A0.1 nAN/AN/A25 nA25 nA
Nominal 3 db Bandwidth300 Hz3 Hz3 Hz100 Hz100 Hz3 Hz100 Hz3 Hz3 Hz
Response Time, 0-90%1 msec150 msec150 msec10 msec10 msec250 msec5 msec150 msec150 msec
CJC Accuracy,
Ambient Temp.
+5 to 45°C
NANANANANANANA±1.0°C
max.
±1.0°C
max.
Supply Voltage19-29 VDC14-35 VDC14-35 VDC14-35 VDC14-35 VDC14-35 VDC18-3514-35 VDC14-35 VDC
Supply Current35 mA25 mA25 mA20 mA20 mA25 mA60 mA25 mA25 mA
* T/C is thermocouple

Output Module Specifications
ModelOM7-22OM7-39
Output Range±10 V0-20 mA
4-20 mA
Input Range±10 V0-10 V
1-5 V
Accuracy±0.1% Span±0.1% Span
Nonlinearity±0.02% Span±0.02% Span
Output Offset0.001% Span/0.0035% Span/C
Max. Output±14 Vdc30 Ma
Load Resistance*5 K.m min.0-850.
Nominal 3 db Bandwidth400 Hz100 Hz
Response Time, 0-90%1 ms3 ms
Common Mode Voltage1500 V rms1500 V rms
Supply Voltage19-29 Vdc14-35 Vdc
Supply Current20 mA max60 mA max
*Load resistance of OM7-39 dependent on power supply

OM7-34 Linearized RTD Input Module (@ +23°C ±5°C and Vs = +24Vdc)
Model Input Range Accuracy Nonlinearity
OM7-34-01-X-C -100 to +100°C ±0.15% ±0.05%
OM7-34-02-X-C 0 to +100°C ±0.2% ±0.05%
OM7-34-03-X-C 0 to +200°C ±0.15% ±0.05%
OM7-34-04-X-C 0 to +600°C ±0.1% ±0.05%
OM7-34-N-01-X-C 0 to +300°C ±0.3% ±0.012%
OM7-34-N-02-X-C 0 to +200°C ±0.3% ±0.14%
NOTES:
The X in the OM7-34 model number designations in the above table is used to identify the output voltage range option. If X=1, then the OM7-34 is factory configured for a 1-5 V output; and if X=2, then the OM7-34 is factory configured for a 0-10 V output. The Standard Range OM7-34s (i.e., OM7-34-01, OM7-34-02, OM7-34-03, OM7-34-04) are configured for a Platinum RTD with the DIN standard alpha of 0.00385. The OM7-34-N Series is configured for Nickel RTDs.


OM7-34 Linearized RTD Input Module (@ +23°C ±5°C and Vs = +24Vdc)
Model Input Range Accuracy1,2 (typical) Accuracy1 (max)
OM7-47-J-01-1-C 0 to +760°C 0.15% span 0.38% span
OM7-47-J-01-2-C 0 to +760°C 0.13% span 0.32% span
OM7-47-J-02-1-C -100 to +300°C 0.16% span 0.35% span
OM7-47-J-02-2-C -100 to +300°C 0.14% span 0.30% span
OM7-47-K-03-1-C 0 to +1300°C 0.15% span 0.35% span
OM7-47-K-03-2-C 0 to +1300°C 0.15% span 0.32% span
OM7-47-K-04-1-C 0 to +600°C 0.09% span 0.20% span
OM7-47-K-04-2-C 0 to +600°C 0.08% span 0.18% span
OM7-47-T-05-1-C 0 to +400°C 0.24% span 0.50% span
OM7-47-T-05-2-C 0 to +400°C 0.19% span 0.38% span
OM7-47-T-06-1-C -100 to +200°C 0.29% span 0.57% span
OM7-47-T-06-2-C -100 to +200°C 0.25% span 0.47% span
OM7-47-E-07-1-C 0 to +900°C 0.18% span 0.41% span
OM7-47-E-07-2-C 0 to +900°C 0.15% span 0.34% span
OM7-47-R-08-1-C +500 to +1750°C 0.15% span 0.36% span
OM7-47-R-08-2-C +500 to +1750°C 0.13% span 0.30% span
OM7-47-S-09-1-C +700 to +1750°C 0.13% span 0.31% span
OM7-47-S-09-2-C +700 to +1750°C 0.11% span 0.25% span
OM7-47-B-10-1-C +800 to +1800°C 0.19% span 0.41% span
OM7-47-B-10-2-C +800 to +1800°C 0.17% span 0.35% span
OM7-47-N-11-1-C +200 to +1300°C 0.14% span 0.31% span
OM7-47-N-11-2-C +200 to +1300°C 0.09% span 0.27% span
1) The CJC sensor accuracy should be added to the module accuracy listed in this table in order to compute the overall measurement accuracy.
2) Accuracy includes the effects of repeatability, hysteresis, and conformity.


Millivolt Input - Unipolar
Model No. Input Range Output Range
OM7-30-01-1-C 0-10 mV 1-5 V
OM7-30-01-2-C 0-10 mV 0-10 V
OM7-30-02-1-C 0-100 mV 1-5 V
OM7-30-02-2-C 0-100 mV 0-10 V


Millivolt Input - Bipolar
Model No. Input Range Output Range
OM7-30-06-1-C ±10 mV 1-5 V
OM7-30-06-2-C ±10 mV 0-10 V
OM7-30-07-1-C ±100 mV 1-5 V
OM7-30-07-2-C ±100 mV 0-10 V


Voltage Input - Unipolar
Model No. Input Range Output Range
OM7-30-03-1-C 0-1 V 1- 5 V
OM7-30-03-2-C 0-1 V 0-10 V
OM7-31-04-1-C 0-5 V 1-5 V
OM7-31-04-2-C 0-5 V 0-l0 V
OM7-30-05-1-C 1-5 V 1-5 V
OM7-30-05-2-C 1-5 V 0-10 V
OM7-31-01-1-C 0-10 V 1-5 V
OM7-31-01-2-C 0-10 V 0-10 V


Voltage Input - Bipolar
Model No. Input Range Output Range
OM7-30-08-1-C ±1 V 1-5 V
OM7-30-08-2-C ±1 V 0-10 V
OM7-31-02-1-C ±5 V 1-5 V
OM7-31-02-2-C ±5 V 0-10 V
OM7-31-03-1-C ±10 V 1-5 V
OM7-31-03-2-C ±10 V 0-10 V
OM7-21-C ±10 V ±10 V


Process Voltage Inputs
Model No. Input Range Output Range
OM7-33-01-1-C 1-5 V 1-5 V
OM7-33-01-2-C 1-5 V 0-10V
OM7-33-02-1-C 0-5 V 1-5 V
OM7-33-02-2-C 0-5 V 0-10 V


Process Current Inputs
Model No. Input Range Output Range
OM7-32-01-1-C 4-20 mA 1-5 V
OM7-32-01-2-C 4-20 mA 0-10 V
OM7-32-02-1-C 0-20 mA 1-5V
OM7-32-02-2-C 0-20 mA 0-10V


Linearized Thermocouple
Model No. Input Range Output Range Thermocouple Type
OM7-47-J-01-1-C 0 to +760°C 1-5 V J
OM7-47-J-01-2-C 0 to +760°C 0-10 V J
OM7-47-J-02-1-C -100 to +300°C 1-5 V J
OM7-47-J-02-2-C -100 to +300°C 0-10 V J
OM7-47-K-03-1-C 0 to +1300°C 1-5 V K
OM7-47-K-03-2-C 0 to +1300°C 0-10 V K
OM7-47-K-04-1-C 0 to +600°C 1-5 V K
OM7-47-K-04-2-C 0 to +600°C 0-10 V K
OM7-47-T-05-1-C 0 to +400°C 1-5 V T
OM7-47-T-05-2-C 0 to +400°C 0-10 V T
OM7-47-T-06-1-C -100 to +200°C 1-5 V T
OM7-47-T-06-2-C -100 to +200°C 0-10 V T
OM7-47-E-07-1-C 0 to +900°C 1-5 V E
OM7-47-E-07-2-C 0 to +900°C 0-10 V E
OM7-47-R-08-1-C +500 to +1750°C 1-5 V R
OM7-47-R-08-2-C +500 to +1750°C 0-10 V R
OM7-47-S-09-1-C +700 to +1750°C 1-5 V S
OM7-47-S-09-2-C +700 to +1750°C 0-10 V S
OM7-47-B-10-1-C +800 to +1800°C 1-5 V B
OM7-47-B-10-2-C +800 to +1800°C 0-10 V B
OM7-47-N-11-1-C +200 to +1300°C 1-5 V N
OM7-47-N-11-2-C +200 to +1300°C 0-10 V N


RTD Inputs (Linearized 100. Pt 2-Wire or 3-Wire, Alpha = 0.00385)
Model No. Input Range Output Range
OM7-34-01-1-C -100 to +100°C 1-5 V
OM7-34-01-2-C -100 to +100°C 0-10 V
OM7-34-02-1-C 0 to +100°C 1-5 V
OM7-34-02-2-C 0 to +100°C 0-10 V
OM7-34-03 -1-C 0 to + 200°C 1-5 V
OM7-34-03-2-C 0 to +200°C 0- 10 V
OM7-34-04-1-C 0 to +600°C 1-5 V
OM7-34-04-2-C 0 to +600°C 0- 10 V
OM7-34-05-1-C -50 to +350°C 1-5 V
OM7-34-05-2-C -50 to +350°C 0-10 V


RTD Inputs (Linearized 120 . Ni 2-Wire or 3-Wire)
Model No. Input Range Output Range
OM7-34-N-01-1-C 0 to +300°C 1-5 V
OM7-34-N-01-2-C 0 to +300°C 0-10 V
OM7-34-N-02-1-C 0 to +200°C 1-5 V
OM7-34-N-02-2-C 0 to +200°C 0-10 V


Non-Linearized Thermocouple
Model No. Input Range Output Range Thermocouple Type
OM7-37-J-01- 1-C -100 to +760°C 1-5 V J
OM7-37-J-01-2-C -100 to +760°C 0-10 V J
OM7-37-J-10-1-C 0 to +200°C 1-5 V J
OM7-37-J-10-2-C 0 to +200°C 0-10 V J
OM7-37-J-11-1-C 0 to +400°C 1- 5 V J
OM7-37-J-11-2-C 0 to +400°C 0-10 V J
OM7-37-J-12-1-C 0 to +600°C 1-5 V J
OM7-37-J-12-2-C 0 to +600°C 0-10 V J
OM7-37-J- 13-1-C +300 to +600°C 1-5 V J
OM7-37-J-13-2-C +300 to +600°C 0-10 V J
OM7-37-K-02-1-C -100 to +1350°C 1-5 V K
OM7-37-K-02-2-C -100 to +1350°C 0-10 V K
OM7-37-K-20-1-C 0 to +300°C 1-5 V K
OM7-37-K-20-2-C 0 to +300°C 0-10 V K
OM7-37-K-21-1-C 0 to +600°C 1-5 V K
OM7-37-K-21-2-C 0 to +600°C 0-10 V K
OM7-37-K-22-1-C 0 to +1200°C 1-5 V K
OM7-37-K-22-2-C 0 to +1200°C 0-10 V K
OM7-37-K-23-1-C +600 to +1200°C 1-5 V K
OM7-37-K-23-2-C +600 to +1200°C 0-10 V K
OM7-37-T-03-1-C -100 to +400°C 1-5 V T
OM7-37-T-03-2-C -100 to +400°C 0-10 V T
OM7-37-E-04-1-C 0 to +900°C 1- 5 V E
OM7-37-E-04-2-C 0 to +900°C 0-10 V E
OM7-37-R-05-1-C 0 to +1750°C 1-5 V R
OM7-37-R-05-2-C 0 to +1750°C 0-10 V R
OM7-37-S-06-1-C 0 to +1750°C 1-5 V S
OM7-37-S-06-2-C 0 to +1750°C 0-10 V S
OM7-37-B-07-1-C 0 to +1800°C 1-5 V B
OM7-37-B-07-2-C 0 to +1800°C 0-10 V B


2-Wire Transmitter Inputs with Loop Power (with Sense Resistor)
Model No. Input Range Output Range
OM7-35-01-1-C 4-20 mA 1 -5 V
OM7-35-01-2-C 4-20 mA 0-10 V


Output Modules
Model No. Input Range Output Range
OM7-22-C ±10 V ±10 V
OM7-39-01-C 1-5 V 4-20 mA
OM7-39-02-C 0-10 V 0-20 mA


Backplanes
Model No. Description
OM7-BP-1-C 1 Channel backplane
OM7-BP-1-DIN-C 1 Channel backplane DIN Rail
OM7-BP-2-C 2 Channel backplane
OM7-BP-2-DIN-C 2 Channel backplane DIN Rail
OM7-BP-4-C 4 Channel backplane
OM7-BP-4-DIN-C 4 Channel backplane DIN Rail
OM7-BP-8-C 8 Channel backplane
OM7-BP-8-DIN-C 8 Channel backplane DIN Rail
OM7-BP-16-C 16 Channel backplane
OM7-BP-16-DIN- 16 Channel backplane DIN Rail
RAIL-35-2 35mm Din Rail, 2 Meter Length


Cables
Model No. Description
OM7-CA-01 6" cable (25-pin, D-type connector to 26-pin male header connector) converts OM7 backplane connector to an OM5 backplane connector pin out
OM7-CA-02 3-foot cable (25 pin, D-type connector on both ends)


Accessories
Model No. Description
U24Y175 Power supply (105-125/210-250 VAC input, 24 VDC @ 175 mA output
OM7-PROTO OM7 Breadboard kit
OM7-BP-EV 1 Channel evaluation
OM7-IF Universal interface board
OM7-RK002 19” rack for mounting backplane
OM7-RI 250ohm current conversion resistor
OM7-DIN-SF DIN Base element with snap foot
OM7-DIN-WSF DIN Side element without snap foot
OM7-DIN-SE DIN Side elements
OM7-DIN-CP DIN Connector pins


Product Number
Description
Price
 
Regulated Power Supply for Transducers and Transmitters
$175.00
20 In Stock
Modular Signal Conditioning System Accepts a Wide Range of Inputs
$116.00
0 In Stock
Modular Signal Conditioning System Accepts a Wide Range of Inputs
$27.00
0 In Stock
Modular Signal Conditioning System Accepts a Wide Range of Inputs
$66.50
0 In Stock
Modular Signal Conditioning System Accepts a Wide Range of Inputs
$12.50
0 In Stock
Modular Signal Conditioning System Accepts a Wide Range of Inputs
$8.50
0 In Stock
Modular Signal Conditioning System Accepts a Wide Range of Inputs
$69.50
3 In Stock
Modular Signal Conditioning System Accepts a Wide Range of Inputs
$8.50
0 In Stock
Modular Signal Conditioning System Accepts a Wide Range of Inputs
$3.25
3 In Stock
Modular Signal Conditioning System Accepts a Wide Range of Inputs
$2.10
6 In Stock

en-US
en
Save Configuration