text.skipToContent text.skipToNavigation

If you have previously used the Omega Website, you will need to Reset your Password on the new site.
Resetting your password is required one time only.

Configure Product
Saved Configuration
View Configuration
Terms and Conditions
Saved Addresses
Your card information was not accepted. Please contact the issuing bank for details.
Payment submission timed out. The server might be busy.
There was an error processing your request.
Please verify there are no missing or invalid fields.
Please enter a card number
Please select a card type
Please enter a value for this field
Please enter an expiry month
Please enter an expiry year
Please enter an issue number
Please enter a start month
Please enter a start year
The card number is not valid
The card type is not supported
The card verification code is not valid
The expiry month is not valid
The expiry year is not valid
The issue number is not valid
The start month is not valid
The start year is not valid
This field is required
Errors were found with the address you provided. Please verify your address.
Date should be in MM/DD/YYYY format
Please enter valid values
Please enter future date
Please enter the shipping date
Shipment date is updated

Modular Signal Conditioning System for Strain Gage Bridges, mV and other Sensor Signals

Item# OM2-162

Modular Signal Conditioning System for Strain Gage Bridges, mV and other Sensor Signals Modular Signal Conditioning System for Strain Gage Bridges, mV and other Sensor Signals
The OMEGA™ OM2 modular signal conditioning system provides a low cost, versatile method of interconnecting a variety of analog signals for measurement and control systems. The OM2 modules interface directly with sensors or analog signals such as strain gages, mV, thermocouples and RTD’s. The module conditions the input signal to an amplified voltage output of ±10 Vdc, allowing longer signal transmission and interfacing with data acquisition products such as analog/digital cards, dataloggers, PLC’s and chart recorders. The backplane includes a power supply (to power the modules) and mounting rails for convenient mounting capability. All connections are easily made with a screwdriver.

The backplane is available with a 115 Vac, 230 Vac or 10-36 Vdc power supply.

The backplane and signal conditioner assembly make a convenient, lightweight and accurate method of multiple signal conditioning in instrumentation environments. The signal conditioning modules can also be used by themselves as single amplifier devices. An optional interface mounting block can be purchased with screw terminations for easy power and output signal hookup. A typical system would include six modules and one backplane/power supply assembly.

For complete product specifications see the detailed spec sheet.
OM2-162
  • Compact, Light and Convenient to Use
  • Easy Access to All Trimpots
  • Integral Bridge Completion Resistors
  • Adjustable Bridge Sensor Excitation
  • Adjustable Filter Frequency AC or DC Operation
  • Screw Clamp Terminal Blocks
Input Type
Number of Inputs
Output Type
Quantity Price each
1-4 $430.00
5-9 $408.50
10-24 $399.90
25-49 $382.70
50-99 $374.10
100+ $365.50

In stock

Lead Time ( If not in Stock): 6 weeks

Product Specs

  • Form Factor Panel or Wall Mount
  • Maximum Ambient Temperature 55 {C} (131 {F})
  • Minimum Ambient Temperature -25 {C} (-13 {F})
  • Maximum Storage Temperature 80 {C} (176 {F})
  • Minimum Storage Temperature -40 {C} (-40 {F})
  • Form Factor Panel or Wall Mount
  • Maximum Storage Temperature 80 {C} (176 {F})
  • Maximum Ambient Temperature 55 {C} (131 {F})
  • Minimum Ambient Temperature -25 {C} (-13 {F})
  • Minimum Storage Temperature -40 {C} (-40 {F})

The OMEGA™ OM2 modular signal conditioning system provides a low cost, versatile method of interconnecting a variety of analog signals for measurement and control systems. The OM2 modules interface directly with sensors or analog signals such as strain gages, mV, thermocouples and RTD’s. The module conditions the input signal to an amplified voltage output of ±10 Vdc, allowing longer signal transmission and interfacing with data acquisition products such as analog/digital cards, dataloggers, PLC’s and chart recorders. The backplane includes a power supply (to power the modules) and mounting rails for convenient mounting capability. All connections are easily made with a screwdriver.

The backplane is available with a 115 Vac, 230 Vac or 10-36 Vdc power supply.

The backplane and signal conditioner assembly make a convenient, lightweight and accurate method of multiple signal conditioning in instrumentation environments. The signal conditioning modules can also be used by themselves as single amplifier devices. An optional interface mounting block can be purchased with screw terminations for easy power and output signal hookup. A typical system would include six modules and one backplane/power supply assembly.

For complete product specifications see the detailed spec sheet.

en-US
en
Save Configuration