text.skipToContent text.skipToNavigation

If you have previously used the Omega Website, you will need to Reset your Password on the new site.
Resetting your password is required one time only.

Configure Product
Saved Configuration
View Configuration
Terms and Conditions
Saved Addresses
Your card information was not accepted. Please contact the issuing bank for details.
Payment submission timed out. The server might be busy.
There was an error processing your request.
Please verify there are no missing or invalid fields.
Please enter a card number
Please select a card type
Please enter a value for this field
Please enter an expiry month
Please enter an expiry year
Please enter an issue number
Please enter a start month
Please enter a start year
The card number is not valid
The card type is not supported
The card verification code is not valid
The expiry month is not valid
The expiry year is not valid
The issue number is not valid
The start month is not valid
The start year is not valid
This field is required
Errors were found with the address you provided. Please verify your address.
Date should be in MM/DD/YYYY format
Please enter valid values
Please enter future date
Please enter the shipping date
Shipment date is updated

RTD Temperature Transmitter - 316 Stainless Steel Construction

Item# TX94A-2-SS-M12F-1

RTD Temperature Transmitter - 316 Stainless Steel Construction RTD Temperature Transmitter - 316 Stainless Steel Construction
Loop Powered! The OMEGA™ 2-wire TX94A-SS Series temperature transmitters are high-performance, industrial transmitters designed for direct connection to most CIP (clean-inplace) Sanitary Pt100 probes and sensors that incorporate a M12 style connection. All models feature a miniature signal conditioner built into a sealed stainless steel connector housing. The signal conditioner converts the resistive change of a 100 Ω, 0.00385 RTD probe or sensor into an industry-standard 2-wire, 4 to 20 mA analog output across a dedicated temperature range. Output connection is also a standard M12 connector.
TX94A-2-SS-M12F-1
  • Ideal for Wash-down, Outdoor, Sanitary or Marine Environments
  • Compact Design Attaches Directly to Most 3-Wire and 4-Wire, Pt100, 0.00385 Curve Sanitary Probes and Sensors with M12 Style Connectors
  • True 2-Wire Operation, Loop Powered 4 to 20 mA Output
  • Sealed Signal Conditioner Built Into NEMA 4X (IP67) 316 Stainless Steel Housing
  • ±0.1% FS Accuracy, High Repeatability, and Stability
  • Both Zero and Span Adjustments for Field Calibration
  • Provides “Upscale” Break Detection and Compensates for Long Lead Wires
Input Ranges
Input Type
Number of Inputs
Output Type
See All Options
Quantity Price each
1-9 $213.00
10-24 $202.35
25-49 $191.70
50-99 $181.05
100-499 $170.40
500+ $159.75

In stock

Lead Time ( If not in Stock): 2 weeks

Product Specs

  • Accuracy Value ±0.1% FS Accuracy
  • Form Factor Wallmount
  • Maximum Ambient Temperature 85 {C} (185 {F})
  • Minimum Ambient Temperature -40 {C} (-40 {F})
  • Supply Frequency 3 dB @ 3 Hz
  • Form Factor Wallmount
  • Accuracy Value ±0.1% FS Accuracy
  • Maximum Ambient Temperature 85 {C} (185 {F})
  • Minimum Ambient Temperature -40 {C} (-40 {F})
  • Supply Frequency 3 dB @ 3 Hz

Loop Powered! The OMEGA™ 2-wire TX94A-SS Series temperature transmitters are high-performance, industrial transmitters designed for direct connection to most CIP (clean-inplace) Sanitary Pt100 probes and sensors that incorporate a M12 style connection. All models feature a miniature signal conditioner built into a sealed stainless steel connector housing. The signal conditioner converts the resistive change of a 100 Ω, 0.00385 RTD probe or sensor into an industry-standard 2-wire, 4 to 20 mA analog output across a dedicated temperature range. Output connection is also a standard M12 connector.

en-US
en
Save Configuration