text.skipToContent text.skipToNavigation

If you have previously used the Omega Website, you will need to Reset your Password on the new site.
Resetting your password is required one time only.

Configure Product
Saved Configuration
View Configuration
Terms and Conditions
Saved Addresses
Your card information was not accepted. Please contact the issuing bank for details.
Payment submission timed out. The server might be busy.
There was an error processing your request.
Please verify there are no missing or invalid fields.
Please enter a card number
Please select a card type
Please enter a value for this field
Please enter an expiry month
Please enter an expiry year
Please enter an issue number
Please enter a start month
Please enter a start year
The card number is not valid
The card type is not supported
The card verification code is not valid
The expiry month is not valid
The expiry year is not valid
The issue number is not valid
The start month is not valid
The start year is not valid
This field is required
Errors were found with the address you provided. Please verify your address.
Date should be in MM/DD/YYYY format
Please enter valid values
Please enter future date
Please enter the shipping date
Shipment date is updated

Universal DIN Rail Transmitter

Item# TXDIN1620

Universal DIN Rail Transmitter Universal DIN Rail Transmitter
The TXDIN1600 Series is a new generation DIN rail mounted temperature transmitter. It has been designed to accept most common process and temperature sensor inputs and provide the user with a standard two wire 4 to 20 mA output signal. Isolation is provided between input and output and all temperature ranges are linear to temperature.

Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the TXDIN1600 and your PC. Using our free configuration software, your PC will automatically upload the existing configuration data and guide you through any changes you wish to make. To further help save time, the TXDIN1600 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC.

The TXDIN1600 is also provided with user push button trim, allowing trim adjustments at both 4 mA and 20 mA. The user trim function can be locked during configuration if not required. The range led indicates out of range input during normal operation, during user trim it is used to indicate the stage of trim.
TXDIN1620
  • Suitable for Load Cell/Strain Gauge Applications
  • Universal Current, Bipolar Voltage Outputs
  • Input Range 0.2 to 7.5 MV/V, 5 V Excitation
  • Powered 10 to 32 Vac or 10 to 48 Vdc Supply
  • 2 to 6 Point Calibration with Active Set Option
  • Remote Tare, Front Panel Push Button Configuration
  • USB Programmable
Input Ranges
Input Type
Number of Inputs
Output Type
 This item is available for quick shipping
Quantity Price each
1-4 $233.00
5-9 $221.35
10-24 $216.69
25-49 $207.37
50-99 $202.71
100+ $198.05

In stock

Lead Time ( If not in Stock): 6 weeks

Product Specs

  • Accuracy Value ±5 uA
  • Form Factor DIN Rail Mount
  • Maximum Ambient Humidity 95% RH
  • Maximum Ambient Temperature 70 {C} (158 {F})
  • Minimum Ambient Temperature -20 {C} (-4 {F})
  • Minimum Ambient Humidity 10% RH
  • Form Factor DIN Rail Mount
  • Accuracy Value ±5 uA
  • Maximum Ambient Humidity 95% RH
  • Maximum Ambient Temperature 70 {C} (158 {F})
  • Minimum Ambient Humidity 10% RH
  • Minimum Ambient Temperature -20 {C} (-4 {F})

The TXDIN1600 Series is a new generation DIN rail mounted temperature transmitter. It has been designed to accept most common process and temperature sensor inputs and provide the user with a standard two wire 4 to 20 mA output signal. Isolation is provided between input and output and all temperature ranges are linear to temperature.

Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the TXDIN1600 and your PC. Using our free configuration software, your PC will automatically upload the existing configuration data and guide you through any changes you wish to make. To further help save time, the TXDIN1600 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC.

The TXDIN1600 is also provided with user push button trim, allowing trim adjustments at both 4 mA and 20 mA. The user trim function can be locked during configuration if not required. The range led indicates out of range input during normal operation, during user trim it is used to indicate the stage of trim.

  • CE Icon CE

en-US
en
Save Configuration