text.skipToContent text.skipToNavigation

Temperature Transmitter for Thermocouples, RTD's, Millivolt input and Resistance

$400.00

Item# TX86

This item is available for quick shipping

Volume discounts available

Volume Discount Schedule

Quantity	Price each
1-4	$400.00
5-9	$380.00
10-24	$372.00
25-49	$356.00
50-99	$348.00
100+	$340.00

Qty

Added to Your Shopping Cart

In stock

Lead Time ( If not in Stock): 6 weeks

Add to Project List

Universal Input RTD, T/C, Ω, POT and mV
Models for 100, 200, 500, 1000 Ω, 0.00385 2- or 3-Wire RTD’s
Field Scalable
Programming by Push-Buttons on Front
Isolation 1000 VRMS Between Input and Output
Self-Diagnostic With Temp Drift Compensation
LED Display - High Brightness
Sensor O/C and S/C Detection
Solid State Relay Output

Temperature Sensors and Instruments - View related products

Data Sheet (PDF)

Product info

Input Type

Input Ranges

Output Type

Display Type

Supply Voltage Type

Isolation

Programability

Product Specs

Accuracy Value ± 0.2% of full scale input
Form Factor Head-mounted
Maximum Ambient Temperature 70 {C} (158 {F})
Minimum Ambient Temperature -20 {C} (-4 {F})
RTD Connection 2 or 3 wire
RTD Curves Supported a = 0.00385

Form Factor Head-mounted
Accuracy Value ± 0.2% of full scale input
Maximum Ambient Temperature 70 {C} (158 {F})
Minimum Ambient Temperature -20 {C} (-4 {F})
RTD Connection 2 or 3 wire
RTD Curves Supported a = 0.00385

All Models

Product Details

Please check out Newest Released 2-wire Transmitters with Standard, FM & Hart Models Available TXUN Series for more advanced features with better price.

The TX86 is a 2-wire Loop-Powered, Galvanic-Isolated, Programmable Universal Input Temperature Transmitter that is designed to be head-mounted, but can be standalone as well. It uses 16 bits A/D and D/A converters offering high accuracy with Linearized 4 to 20 mA or 20 to 4 mA outputs. Being a user-friendly rugged instrument, it displays the measured variable and has a SSR output. The TX86 has 3 push buttons on its front keyboard & a 4-digit 7-segment bright LED display module that indicates the values of the measured parameters during the Measuring Mode while also providing prompting and programming instructions during the setup and calibration mode routines. The 1000V AC galvanic isolation removes all ground loop effects. Three different engineering units (°C, °F and %), can be displayed and the chosen unit is highlighted by an associated LED lamp when in the measuring mode.

SPECIFICATIONS

Input Sensors	Measured Range (°C)	Minimum Span (°C)
K	-100 to 1372	50
J	-100 to 750	50
T	-100 to 400	50
E	-100 to 750	50
R	0 to 1700	50
N	-100 to 1300	50
S	0 to 1700	50
B	400 to 1800	50
100PT	-200 to 850	50
200PT	-200 to 500	50
500PT	-200 to 200	25
1000PT	-200 to 200	25
Ni120	-80 to 260	50
Cu10	-100 to 260	50
Resistance	0 to 2000Ω	50Ω
Potentiometer	0 to 2000Ω	50Ω
mV (millivolts)	-5 to +60	2 mV

General Performance: (@ 24 Vdc, 25°C ±2°C)
Loop Power: 12 to 30 Vdc, LED indicator reverse polarity protected 60 Vdc
Output: 4/20 mA calibrated; 3.8 to 20.5 mA linear
Resolution: 2uA
RTD Excitation Current: 30/150 uA ± 2%
Input Impedance: 1 MΩ, nominal
Maximum Load: 50 x (Vsupply – 12V) Ω
Accuracy: ± 0.2% of full scale input
Long-Term Stability: ± 0.15%/ year
Temp. Coefficient: ± 0.01%/°C (5 to 50°C)
Dampening Constant: Programmable
Configuration: Via 3 push-buttons on front
Solid State Relay Output: 30 mA maximum
Cold Junction Comp: ± 2°C max (5 to 50°C)
Power Supply Effect: Less than 0.01%/V
Input Protection: 40 Vdc maximum
Sensor Burnout: Upscale >21mA, downscale <3.8 mA
Isolation Rating: 1000V RMS continuous
Response Time: 1 second with dampening off
Power-on Response: Within 5 seconds
Ambient Temps: -20 to 70°C (-4 to 158°F) (storage and operation)
Relative Humidity: 20 to 90%, non-condensing
Dimensions: 62 Dia x 42 mm H (2.5 x 1.7")
Mounting: Head-mounted
Housing: Plastic, polycarbonate
Weight: 80 g (0.18 lb)

Reviews

Manuals

Manual (PDF)

Questions And Answers

ACCESSORIES