The New Omega temperature & process controller CND3 Series is designed with upgraded hardware and higher specifications to offer smart operation, fast response, and easy to use, plus user-friendly and user-defined function keys. With Self-Tuning PID and FUZZY temperature control functions, controllers can be installed in both open space or confined space applications and are capable of presenting a smooth temperature control curve.
Applications Include: Machinery for the printing, food packaging, solar panel manufacturing, and high-tech electronics industries.
SPECIFICATION GENERAL SPECIFICATIONS Power: AC Power: 100 to 240 VAC, 50/60Hz, 5VA max DC Power: 24 VDC ±10%, 5W max Display: 2 line by 4-digital, FSTN LCD negative image transmissive with backlight PV Display: Orange color backlight SV Display: Green color backlight Certification and Compliances: Safety: UL Recognized Component, File E243710 Vol. 1 EC Declaration LVD: EN61010-1; 2010 EMC: EN61326-1; 2013, EN61131-2; 2007, EN61000-6; 2005, EN61000-6-4; 2007/A1; 2011 IP66 Enclosure rating (face only), IEC60529 Edition 2.1 2001-02 INPUT SPECIFICATIONS Sample Rate: 100ms Sensor Input Overvoltage Rating: 15 Vdc RTD Inputs Type: 3 wires Excitation: 180µA Lead Resistance: 15OΩ max per wire Resolution: 1 or 0.1ºC for all type Thermocouple Input Impedance: Approx. 4.7MΩ Lead Resistance Effect: -0.3µV/Ω Cold Junction Compensation: Less than 1.5ºC typical (max 2.0ºC) error over -10 to 50ºC ambient temperature range Resolution: 1 or 0.1ºC for all type Temperature Indication Accuracy: ±(0.3% of span, +1ºC) at 25ºC ambient after 20 minutes warm up. Including NIST conformity, cold junction effect, A/D conversion errors and linearization conformity
Process Indication Accuracy *Depending on the rating of resistor 249Ω built in.
Remote Set-Point Input: DC 0 to 10V Linear Voltage Input: Opening Jumper, resolution: 156µV/scale DC4 20mA/0 to 20mA Input: Shorting Jumper, resolution: 0.63µA/scale User Input: (Event Input) Contact: ON Resistance: 1KΩ Max. OFF Resistance: 100KΩ Min. Response Time: 1 sec. CT Input: Opening Jumper for Max 30A Measurement with 30A CT Ring, Resolution: 0.1A Shorting Jumper for Max 100A Measurement with 100A CT Ring, Resolution: 0.1A OUTPUT SPECIFICATIONS Relay Output: Type: Form A Contact Rating: 5A @ 250 VAC or 30 VDC (Resistive Loading) Pulse Voltage Output: Rating: DC 12V ±10%, 40mA max with short protection. Current Output: DC 0 to 20mA/DC 4 to 20mA output, max resistive loading 500Ω Resolution: 2.14µA/scale Linear Voltage Output: DC 0 to 10V Output, min Resistive Loading 1KΩ Resolution: 1.1mV/scale Retransmission Output DC 0 to 20mA/DC 4 to 20mA Output, Max Resistive Loading 500Ω Resolution: 2.09µA/scale