Intrinsically Safe Temperature and Humidity Data Logger
Please add to cart to keep it or exit the configuration
- Intrinsically Safe for Class I, Division 1, Groups ABCD Non-Incendive for Class I, Division 2, Groups ABCD Locations
- 316 Stainless Steel Enclosure
- Compact Design
- Fast Response Time
- Faster Downloads (1 Minute Full Memory)
- Docking Station Communication
- Easily Identify Low Battery Voltage
- Ready to Use Right Out-of-the-Box
- Free NIST Certification
Edit OptionsView all models
Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
- Maximum Ambient Temperature 80°C (176°F)
- Measurement Units Date and time stamped °C
- Minimum Ambient Temperature -40°C (-40°F)
The new OM-CP-RHTEMP1000IS-A is an intrinsically safe temperature and humidity data logger certified for Class I, Division 1, Groups A, B, C, and D and nonincendive for Class I, Division 2 Groups A, B, C, D environments. This certification makes the device ideal for EtO sterilization, environmental studies, medical and pharmaceutical and numerous other hostile environment applications.
One of the enhancements to the OM-CP-RHTEMP1000IS-A is the stainless steel enclosure with engraved serial number and device name. The device interfaces with the OM-CP-IFC400 docking station or the OM-CP-IFC406 multiplexer data logger interface (sold separately) and can be placed directly into the dock for full communications. No more removal of end-caps to download data. The small size of the OM-CP-RHTEMP1000IS-A allows it to be placed in remote or hard to reach locations. The device now features a battery life indicator allowing users to easily identify low voltage and change batteries when required. This feature maximizes the use of your battery life and is a cost saving efficiency.
The OM-CP-RHTEMP1000IS-A utilizes the latest software. This allows for simple starting, stopping and downloading of collected data. The devices are able to store up to 16,350 time and date stamped humidity and temperature readings in non-volatile solid state memory. Once the readings have been downloaded to the software, it can be viewed in graphic, tabular, and summary form for easy analysis, as well as the potential to be exported into Excel® for further calculations.
Temperature Sensor: Resistance Temperature Detector (RTD)
Temperature Range: -40 to 80°C (-40 to 176°F)
Temperature Resolution: 0.01°C
Temperature Response Time in Air:
t63 - 8 minutes to 63% of change
t90 - 68 minutes to 90% of change
Calibrated Accuracy: ±0.5°C (0 to 50°C)
Humidity Sensor: Capacitive polymer
Humidity Range: 0 to 100% RH (non-condensing)
Humidity Resolution: 0.1% RH
Humidity Response Time in Air:
t63 - 30 seconds to 63% of change
t90 - 2 minutes to 90% of change
Calibrated Accuracy: ±3.0% RH maximum
Start Modes: Software programmable immediate start or delay start up to 24 months in advance
Real Time Recording: May be used with PC to monitor and record data in real time
Memory: 16,350 readings per channel
Password Protection: Yes
Reading Rate: 1 reading every second up to 1 reading every 24 hours
Calibration: Digital calibration through software
Calibration Date: Automatically recorded within device Memory Wrap: Yes
Data Format: Date and time stamped °C, °F, K, °R ; %RH, mg/mL, dew point
Battery Life: 2 years typical at 25°C (15 minute reading rate)
Battery Type: 3.6V lithium battery included, user replaceable
Time Accuracy: ±1 minute/month at 25°C
Computer Interface: OM-CP-IFC400 USB docking station or OM-CP-IFC406 multiplexer interface required; 125,000 baud
Software: Windows® XP SP3/Vista/7 and 8 (32-bit and 64-bit)
Operating Environment: -40 to 80°C (-40 to 176°F), 0 to 95% RH (non-condensing)
Dimensions: 42 L x 24.6 mm dia (1.7 x 0.97')
Weight: 65 g (2.3 oz)
Material: 316 Stainless Steel
How frequently must the device be recalibrated to maintain accuracy?
I want to put the sensor in the oven to record temperature and humidity for 2 days, does the sensor come with software so that I can retrieve the data? or do i need to buy software and/ or docking station to get data out in USB?