The OM-CP-BRIDGE-101A is a battery-powered, stand-alone data loggers that measure and record voltage signals from strain gages, load cells and other low level dc sources. This compact, unit is perfect for monitoring stress, torque, strain, pressure and data from many other sensors/transducers.
The OM-CP-BRIDGE101A offers a multiple start/stop function, ultrahigh speed download capability, 1 million reading storage capacity, optional memory wrap, battery life indicator, optional password protection, programmable alarms and more.
Data retrieval is simple. Plug it into an available USB port and the easy to use Windows software does the rest. The software converts your PC into a real time strip chart recorder. Using the Windows® software, starting, stopping and downloading from the OM-CP-BRIDGE101A is simple and easy. Graphical, tabular and summary data is provided for analysis and data can be viewed in V, mV and µV. The data can also be automatically exported to Excel® for further calculations. The storage medium is non-volatile solid state memory, providing maximum data security even if the battery becomes discharged. Its small size allows it to fit almost anywhere.
The OM-CP-BRIDGE101A was designed with our customers in mind. There are free firmware upgrades for the life of the product so that data loggers already deployed in the field can grow with new technological developments. Units do not need to be returned to the factory for upgrades. The user can do this automatically from any PC.
Specifications Data Logger Reading Rate: 4 Hz to 1 every 24 hours Memory: 1,000,000 readings; software configurable memory wrap 333,000 readings in multiple start/stop mode Memory Wrap Around: Yes Start Modes: Immediate start, delay start up to 24 months, multiple pushbutton start/stop Stop Modes: Manual through software timed (specific date and time) Multiple Start/Stop Mode: Start and stop the device multiple times without having to download data or communicate with a PC Multiple Start/Stop Mode Activation: To Start the Device: Press and hold the pushbutton for five seconds, the green LED will flash during this time. The device has started logging To Stop the Device: Press and hold the pushbutton for five seconds, the red LED will flash during this time. The device has stopped logging Real Time Recording: The device may be used with PC to monitor and record data in real-time LED Functionality: Green LED Blinks: 10 second rate to indicate logging; 15 second rate to indicate delay start mode Red LED Blinks: 10 second rate to indicate low battery and/or full memory; 1 second rate to indicate an alarm condition Password Protection: An optional password may be programmed into the device to restrict access to configuration options. Data may be read out without the password Engineering Units: Native measurement units can be scaled to display measurement units of another type. This is useful when monitoring voltage outputs from different types of sensors such as strain gauges and load cells. Battery Type: 3.6V lithium battery (included); user replaceable Battery Life: 10 months typical, at a 1 minute rate with 350Ω load; 2 years typical, at a 1 minute rate with 1000Ω load Time Accuracy: ±1 minute/month at 20ºC (68ºF), stand alone data logging Computer Interface: USB (interface cable required); 115,200 baud Software: XP SP3/Vista/7 and 8 (32 and 64-bit) Operating Environment: -40 to 80ºC (-40 to 176ºF), 0 to 90% RH non-condensing Dimensions: 36 H x 64 W x 16 mm D (1.4 x 2.5 x 0.6') Weight: 24 g (0.8 oz) Material: ABS plastic OM-CP-WATERBOX101A OperatingTemperature: -20 to 80ºC (-4 to 176ºF) IP Rating: IP65 Dimensions: 62 H x 93 W x 25 mm D (2.45 x 3.66 x 0.93') Material: Anodized aluminum with polycarbonate cover Weight: 140 g (5 oz)
Rated 4 out of
small size and great efficiencyMy experience with this instrument is short but up to date it works very well.
Date published: 2016-03-05
Rated 1 out of
Very Slow to respond and short life spanThese are old technology and very slow to respond. They have to be downloaded to get data and the info is not accurate to the time it was gathered. Changes in environment may take 10 min to show up on the data loggers report and at high and low ranges may take an hour or more to respond.
Date published: 2019-04-15
Rated 4 out of
Professor Packrat from
LoggerGood device, intuitive SW. Good device, intuitive SW.
I have OM-62 and I'm on Windows 10 I have tried with several software to make it works. Can somebody send me the right one for this device.
Asked by: Abel
Hello, the Software link is listed under the 'Product Specs' on the OM-62 Product Page. Please call our Tech Support to help troubleshoot and get you up and running. 1-888-826-6342 | 1-203-359-1660 (US & Canada).
Answered by: Jane
Date published: 2019-04-29
Hello. I am wondering if this device would be suitable to monitor the temperature in a vaccine storage unit. What I want to know is if the refrigerator goes outside of 2'-8' C, will I be able to accurately determine for how long it was out of range?
Asked by: Cathie
Please note if you want to record the data, then OM-63 is ideal. However, If they want an alarm to tell you when your unit went out of range without accessing the data, then this is not the unit for them. What they really need in that case is the OM-THA2. The OM-THA2 with both provide an alarm AND record the data. https://www.omega.com/pptst/OM-THA2-U.html
Answered by: Jane
Date published: 2019-01-30
Is this device capable of measuring in 0.1’C increments?
Asked by: Cathie
Yes, it is capable. We also offer the new OM-HL-SH series with more features.