The OM-CP-PRTEMP1000 submersible pressure and temperature data logger is a battery powered, stand-alone device used for automatically recording pressure from 0 to 500 psia and temperatures from -40 to 80°C (higher temperature range possible for short period of time). This all-in-one compact, portable, easy to use device will measure and record up to 16,383 temperature and 16,383 pressure measurements.
The OM-CP-PRTEMP1000 is a major leap forward in both size and performance. Its real time clock ensures that all data is time and date stamped. The storage medium is non-volatile solid state memory, providing maximum data security even if the battery becomes discharged. Its small size allows it to fit almost anywhere. Data retrieval is simple. Plug it into an empty USB port the easy to use software does the rest. The software converts your PC into a real time strip chart recorder. Data can be printed in graphical or tabular format and can also be exported to a text or Microsoft Excel file.
Specifications Temperature Sensor: Thermistor Temperature Accuracy: 0.5°C Temperature Resolution: 0.1°C Temperature Range: -40 to 80°C (-40 to 176°F) Pressure Sensor: Strain gage Calibrated Accuracy: 2% FSR, 0.25% @ 25°C typical Pressure Range: 0 to 30 psia, 100 psia, 300 psia or 500 psia (psig models also available). Fully submersible data loggers are only available in 0-30 psia, 0-30 psig, 0-100 psia and 0-100 psig ranges Pressure Adapter: 1/4' male NPT or fully submersible Pressure/Temperature Calibration: Digital calibration is available through software Calibration Date: Automatically recorded within device to alert user when calibration is required Recording Interval: 2 seconds to 24 hours selectable through software Start/Time: Software programmable immediate start or delay start up to 6 months in advance Real Time Recording: Device may be used with PC to monitor/ and record data in real time Power: 3.6 V lithium battery included Battery Life: 1 year typical Time Accuracy: ±1 minute per month at 20°C Data Format: Date and time stamped °C, °F, K, °R; PSIA (G), inches, feet, mmHg, bar, Torr, kPa Weight: 340 g (12 oz) Computer Interface: USB (interface cable required); 2400 baud Software: XP SP3/Vista/7 and 8 (32-bit and 64-bit) Operating Environment: -40 to 80°C (-40 to 176°F), 0 to 100% RH non-condensing Dimensions: 32 mm dia x 163 mm L (1.25 x 6.4') Material: Stainless steel
Rated 3 out of
Works but all thermocouple types must be the sameThe datalogger and software is simple enough to use and the software for this datalogger is better than some of the other software omega provides for other data collection devices. It does exactly what is needed, log data.
The major disadvantage of the 4 channel data logger is that all of the channels must be the same thermocouple type. It does not state anywhere on the website, the specification sheet or the manual that all the thermocouple types must be the same. Only after purchase and looking a little deeper, I only found the only place that it was mentioned that all thermocouple types must be the same was in the quick start guide. Now I need to purchase new thermocouples so I can log data from all my thermocouples.