The OM-CP-SHOCK101 is a battery powered, stand-alone 3-axis shock data logger that measures and records shock levels. These compact, economical units have built-in accelerometers to measure dynamic and static acceleration, and may be used in a wide variety of applications, including assembly line monitoring, fragility testing, drop testing and other machinery monitoring.
The OM-CP-SHOCK101 records the peak acceleration levels over user defined intervals, with a software selectable reading rate from 64 per sec to every 5 minutes. The sample rate is 1.953 ms/512 Hz.
The OM-CP-SHOCK101 can store up to 349,000 measurements per axis, and hold them in non-volatile solid-state memory, even when the battery is discharged. Data retrieval is quick and easy-simply plug in to a COM or USB port. The OM-CP-IFC software displays your data in an easy to use graph, so you can analyze your data quickly. A variety of powerful tools allow you to examine, export and print professional looking data with just a click of the mouse.
SPECIFICATIONS Accelerometer Type: MEMS semiconductor Sampling Rate: 1.953 ms/512 Hz Frequency Response: 0 to approx. 400 Hz Recording Interval: 64 Hz to 5 minutes for shock, software selectable Memory: 349,525 readings per axis (1,398,100 total readings) Real Time Recording: May be used with PC to monitor and record instantaneous acceleration in real time (1 sec or slower reading rate, not possible during logging) Start Modes: Software programmable immediate start or delay start up to 180 days in advance Password Protection: An optional password may be programmed into the device to restrict access to configuration options. Data may be read out without the password Calibration: Digital calibration through software Calibration Date: Automatically recorded within device Power: 9 V lithium or alkaline battery (included), user replaceable Battery Life: 7 days typical with lithium battery Data Format: Date and time stamped gravities (3-axis) Time Accuracy: ±1 minute per month at 20 to 30°C Computer Interface: USB or serial interface (cable required); 115,200 baud Software: XP SP3/Vista/7 and 8 (32-bit and 64-bit) Operating Environment: -20 to 60°C (-4 to 140°F), 0 to 95% RH, non-condensing Dimensions: 89 H x 112 W x 26 mm D (3.5 x 4.4 x 1.0') Weight: 340 g (12 oz) Material: Anodized aluminum
Rated 5 out of
5 by
Bob S from
Works great.Data logger with great features. Incredibly flexible range of sampling rates and the software plots data for you. Paints a great picture. I am a homeowner with a humidity problem and this is a great tool to help understand the source. I have already recommended it to two HVAC professionals. Bob Schaale at Omega was very helpful by recommending the right product
Date published: 2017-12-20
Rated 4 out of
5 by
henry from
senior field service repreally great. nice and small and easy to use. the only issue is replacing the batteries. the tab to push down to separate the body is the weak point. this can break and then the 2 pieces will not stay together. a little tape is needed to keep the pieces together
hi can i get a standard operating procedure for this make model please?
Asked by: SANGEETHA
Hello Sangeetha,
If you navigate to product page and scroll down there is a link to download the manual:
https://www.omega.com/en-us/control-and-monitoring-devices/data-loggers/om-el-usb-2-lcd-series/p/OM-EL-USB-2-LCD?searchterm=OM-EL-USB-2-LCD
Answered by: PVDAS
Date published: 2019-11-01
Can someone use this product (OM-EL-USB-CO) to monitor 24 hours CO exposure of female cooks?
Asked by: Ogbonna14
Yes this will log CO levels and does have a alarm light if a alarm condition is met.
Answered by: cw1engineer
Date published: 2019-10-21
Are these data Loggers calibrated when received and how do you verify the calibration?
Asked by: KayCee
To order these units with a NIST certification you would order OM-EL-USB-2-LCD-NIST or OM-EL-USB-2-LCD-PLUS-NIST. To verify the units you would need a humidity / temperature chamber, unfortunately, we do not sell those. Please email us at das@omega.com if you need any further assistance. Thank you.
Answered by: Jane
Date published: 2019-06-20
I purchased a OM-CP-SHOCK101-100-EB but found it didn't come with a patch cord for setting it up and data retrieval. Is the patch cord sold separately or did I just not get one? Please advise as I need this quickly. Thanks. Chris Remen
Asked by: Chris Remen
Thanks for your question. You will need the part number OM-CP-IFC200. https://www.omega.com/en-us/search/?text=OM-CP-IFC200 , The OM-CP-IFC200 has windows software and USB cable, and is in stock.
Answered by: Jane
Date published: 2019-06-13
Where is the manual for the OM-CP-RFVOLT2000A ? Your manual choices doesn't cover it.
Asked by: Victor
Hi, we do apologize for not having the correct manual on the website, and will fix this. Our Tech Support has emailed you the manual you require. We also have a link for all manuals: https://www.omega.com/en-us/pdf-manuals
Answered by: Jane
Date published: 2019-05-21
Is this compatible with a mac? Is it possible to print charts ?
CE