From Dec 1st 2018, INFCTRA & DPF700 Rate Meter models will be discontinued. As a possible replacement, please check out DPF20 DPF20 or consult our sales for UL certified replacement for details.
The DPF701 Series ratemeter/ totalizer offers user programming via the 5 front-panel keys. Scale factor may be programmed from -99,999 to 999,999 (any decimal point, multiply or divide), while offset may be programmed from -99,999 to 999,999 (any decimal point). Programs are stored in non-volatile memory, with three levels of program lockout for security. Optional features include Hi or Lo setpoints for control or alarm, plus RS232 communication. Fixed decimal point or autoranging is standard.
SPECIFICATIONS Functions: rate and totalize selected by menu Display: 6-digit, 7-segment red LED display Inputs Type: single input. TTL, CMOS, NPN open collector, contact closure and magnetic pickup compatible selected by dip switch. Non-isolated. Level: max. 60 V min. 25 mV rms Frequency: 30 kHz max. Excitation: regulated, 5.0 V to 50 mA, 8.2 V to 70 mA, or 12.4 V to 100 mA selected by DIP switch Accuracy:± 1 /2 LSD of total 0.01% of the rate ±1 1 /2 LSD Setpoints: Two, optional Alarm Outputs: optional Communication: RS-232, analog output, optional Rate Measurement Technique: 1/x Gate Time: 0.30 sec Decimal Point: programmable or autoranging Trigger Slope: selectable by DIP switch Leading Zeros: blank Power: 115 or 230 ±15% Vac Dimensions: 1.9 H x 3.8 W x 6" D (48 x 96 x 152 mm) Panel Cutout: 45 H x 92 mm W (1.8 H x 3.6" W) Weight: 454 g (16 oz)
Rated 4 out of
erosion researcher from
Easy to set up for rate measurementI'm using this with a turbine flow sensor (model FTB602B) and with the friendly assistance of the Omega tech support, it was easy to get the two working together.