text.skipToContent text.skipToNavigation

If you have previously used the Omega Website, you will need to Reset your Password on the new site.
Resetting your password is required one time only.

Configure Product
Saved Configuration
View Configuration
Terms and Conditions
Saved Addresses
Your card information was not accepted. Please contact the issuing bank for details.
Payment submission timed out. The server might be busy.
There was an error processing your request.
Please verify there are no missing or invalid fields.
Please enter a card number
Please select a card type
Please enter a value for this field
Please enter an expiry month
Please enter an expiry year
Please enter an issue number
Please enter a start month
Please enter a start year
The card number is not valid
The card type is not supported
The card verification code is not valid
The expiry month is not valid
The expiry year is not valid
The issue number is not valid
The start month is not valid
The start year is not valid
This field is required
Errors were found with the address you provided. Please verify your address.
Date should be in MM/DD/YYYY format
Please enter valid values
Please enter future date
Please enter the shipping date
Shipment date is updated

LEVEL INDICATOR AND INTERFACE

Item# LVCN-40

LEVEL INDICATOR AND INTERFACE LEVEL INDICATOR AND INTERFACE
The LVCN-40 indicator displays tank level or volume in engineering units with 1 to 4 relay status indicators, and is compatible with LVCN210, LVCN318 or LVCN414 series level sensor that’s been configured with the provided software (V50 firmware or higher). Powered by the sensor, the field mount indicator may be located up to 4.5 m (15') from the sensor. The LVCN-40 requires no programming. The indicator repeats the measured value, displays relay status and set-point configuration of the attached sensor. If relay set-point changes are desired, they can be easily made through the field indicator.
LVCN-40
  • Indicates Tank Level or Volume and Relay Status
  • Enables Relay Set Point Changes in the Field
  • Powered Directly by the Attached Sensors
  • Repeats Sensor Data with No Programming
  • Corrosion Resistant Enclosure with Nema 4 (IP65) Faceplate
Display Color
Number of Display Digits
Display Type
Form Factor
Display Digit Height
See All Options
Quantity Price each
1-9 $229.69
10-24 $218.21
25-49 $213.61
50-99 $204.42
100-199 $199.83
200+ $195.24

In stock

Lead Time ( If not in Stock): 6 weeks

Product Specs

  • Housing Material Polycarbonate Nema 4 (IP65) faceplate
  • RTD Connection -20 {C} (-4 {F})

The LVCN-40 indicator displays tank level or volume in engineering units with 1 to 4 relay status indicators, and is compatible with LVCN210, LVCN318 or LVCN414 series level sensor that’s been configured with the provided software (V50 firmware or higher). Powered by the sensor, the field mount indicator may be located up to 4.5 m (15') from the sensor. The LVCN-40 requires no programming. The indicator repeats the measured value, displays relay status and set-point configuration of the attached sensor. If relay set-point changes are desired, they can be easily made through the field indicator.

  • CE Icon CE

en-US
en
Save Configuration