electrical Connection4-pin male connector for both power and signal included with 0.9 m (3') cable
Maximum Operating Pressure34 bar (500 psig)
Maximum Ambient Temperature55°C (131°F)
Minimum Ambient Temperature5°C (41°F)
Retransmission/Analog OutputLinear 0 to 5 Vdc or 4 to 20 mA non-isolated signal
Designed for applications where stainless steel may be required, the FLR1000ST Series flowmeters are rated to 500 psig. These units are available to cover flow ranges from 13 mL/min to 10 L/min. Not for use with Hydrogen or Helium. A 0 to 5 Vdc or 4 to 20 mA analog output is standard with all units; Voltage output models are also available with an additional pulse output, or with a 3 1/2 digit LCD readout.
SPECIFICATIONS Accuracy/Linearity: ±1% FS Repeatability: ±0.2% FS Pressure Rating: 34 bar (500 psig), maximum Operating Ambient: 5 to 55°C (41 to 131°F) Storage Ambient: 0 to 70°C (32 to 158°F) Temperature Sensitivity: = ±0.2% FS/°C Wetted Parts: 316 SS, epoxy, Pyrex® glass, PPS, FKM O-rings, sapphire bearings Filtration (Recommended): 25 microns or less Analog Output: Linear 0 to 5 Vdc or 4 to 20 mA; non-isolated signal Pipe Connections: 316 SS compression tube fittings, provided Electrical Connections: 4-pin male connector for both power and signal; included with 0.9 m (3') cable Power: Voltage Output Models: 11.5 to 12.5 Vdc (0.4 W @ 12 Vdc) Current Output Models: 18 to 24 Vdc (1.2 W @ 24 Vdc), 50 mA