Single Point Load Cell with IP65 Rating600 gf, ±0.028 %, Linearity, 1 mV/V Output, Cable
Please add to cart to keep it or exit the configuration
- Aluminum-Alloy IP65 Single Point Load Cell.
- Colorless Anodized Aluminum
- Suitable for Pricing Scales, Bench Scales, etc.
- Available in Ranges from 600g to 200kg
Edit OptionsView all models
Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Omega’s LC60 Series is a low cost, highly accurate, single point load cell, ideal for OEM applications such as electronic scales and weighing machines. The single point design is highly resistant to eccentric loading, allowing direct mounting to the scale base and weighing platform. The LC60 Series features a moisture-proof sealant and is available in ranges from 600 grams to 200 kilograms.
Maximum Platform Size:
LC62 and LC63: C3
OIML R60 Accuracy Class: LC61: C3D
Output Sensitivity (= FS, mV/V):
LC61: 1.0 ±0.1
LC62 and LC63: 2.0 ±0.2
Maximum Number of Load Cell Intervals(nLC):
LC62 and LC63: 3000
Ratio of Minimum LC Verification Interval Y = Emax/vmin:
LC62 and LC63: 10000
LC61: ±0.028 %FS
LC62 and LC63: ±0.02 %FS
Minimum Dead Load: 0% FS
Safe Overload: 120% FS
Maximum Overload: 150% FS
Zero Balance: ±2.0% FS
Excitation, Recommended Voltage: 5 to 12 VDC
Excitation Maximum: 18(VDC)
Input Resistance ?: 406 ±6
Output Resistance ?: 350 ±3
Insulation Resistance M?: ? 5000 (50 VDC)
Compensated Temperature: -10 to 40ºC (14 to 104ºF)
Operating Temperature: -35 to 65ºC (-31 to 149ºF)
Storage Temperature: -40 to 70ºC (-40 to 158ºF)
Element Material: Aluminum
Recommended Bolt Size/Torque (Nm):
LC62: M6/6 for < 30kg, M6/10 for > 30kg
Ingress Protection (According to EN 60529): IP65
Figure 1 All Dimensions mm