The HHCL10 is ideal for pinpointing the location of electrical cables and metal, water, or gas pipes behind walls, above ceilings or under floors. It can also trace circuits, detect open- and short-circuits, find outlets covered by plaster, identify a circuit’s breaker, and locate blockages in plastic pipes. Makes it safe to break through any wall by revealing and locating hidden infrastructure up to 2 m (6.6') behind it, and eliminates the need to find and read construction drawings before starting a job. Transmitter and receiver communicate on any of eight channels and display readings on a big, bright, multi-function graphic LCD. Both units also include a flashlight (for illuminating dark areas) and a buzzer that can be muted. Transmitter has three power levels; receiver has variable sensitivity. Compatible with one- or two-pole circuits. Used with a metal rod, system can locate blockages and constrictions in plastic pipes.
Specifications Transmitter Output Frequency: 125 kHz Measurement Range/Accuracy: 12 to 600 Vdc or Vac (@60 Hz)/±2.5% in voltmeter mode Display: LCD, with function display and column chart Overvoltage: 300V Current Consumption: 31 mA (minimum), 115 mA (maximum) Operating Temperature: 0 to 40°C (32 to 104°F) @ 80% RH Storage Temperature: -20 to 60°C (-4 to 140°F) @ 80% RH Dimensions: 190 x 89 x 42.5 mm (7.5 x 3.5 x 1.7") Weight: Without Battery: 360 g (12.7 oz) With Battery: 420 g (14.8 oz) Power Source: 9V battery (included) Receiver Tracking Depth (Maximum): In Cable Locating Mode: 2 m (6.6') for 1-pole circuit, 0.5 m (1.6') for 2-pole circuit, 2.5 m (8.2') for single-loop line>br> In Grid Voltage Identification Mode: 0.4 m (1.3') Display: LCD, with function display and column chart Current Consumption: 32 mA (minimum), 89 mA (maximum) Operating Temperature: 0 to 40°C (32 to 104°F) @ 80% RH Storage Temperature: -20 to 60°C (-4 to 140°F) @ 80% RH Dimensions: 242 x 78 x 39 mm (9.5 x 3.1 x 1.5") Weight: Without Batteries: 280 g (9.9 oz) With Battery: 350 g (12.3 oz)