Layer N M12 Modular Environmental Monitoring Smart ProbesSmart Temperature and Humidity probe, Tube Housing
Please add to cart to keep it or exit the configuration
- Measured Temperature Range from:
-40 to 85℃ (-40 to 185℉)
- Humidity: 0 to 100% RH
- 2x Digital I/O
- Modular M12 construction
- OMEGA Smart Core enabled
-Integrated Alarm and Control
-Plug and Play Device Detection
-Sensor health monitoring
Edit OptionsView all models
Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
The Layer N SP-003 / SP-004 Environmental Monitoring Smart Probe provides temperature, relative humidity, and barometric pressure readings. The SP-003/ SP-004 accepts Layer N Smart Interfaces through its M12 8-pin connector.
Configure your Layer N Smart Probe using SYNC’s intuitive configuration interface. Additionally, an integrated command line interface allows for quick serial setup of your Smart Probe and Smart Interface using standard terminal emulators.
Smart Core Enabled
Smart Core is integral to all Layer N Smart Probes. This powerful suite of advanced features enable plug and play connectivity, alarms and notifications, data assurance, data logging, and storage.
Smart Interface Modularity
Customize your Layer N Ecosystem with modular Smart Interfaces that connect and transmit data from your Smart Probe to the Layer N Cloud.
Edge Control and Built in I/O
The Layer N SP-003/SP-004 features 2 configurable digital I/O pins. These can be used for a myriad of applications including driving relays, physical alarms, or sensing dry contacts like door switches. The SP-003/SP-004 can also be utilized as an edge controller, with autonomous independent decision-making capabilities to generate local alarms or provide control outputs based on sensor inputs.
Your Data at a Glance with Layer N Cloud
Layer N Cloud consolidates and brings your data to you when you need it, wherever you are. The intuitive cloud interface allows you to monitor and store your data, set alarms and alerts, and provides insights on device activity. Visit the OMEGA website for more details.
TEMPERATURERange: -40 to 85℃ (-40 to 185℉)
Accuracy: ±0.3℃ (±0.6℉)
Response Time: Less than 1 second
±2.5% (0 to 80%)
±3.5% (80 to 100%)
Response Time: 8 seconds
BAROMETRIC PRESSUREAccuracy Over Full Range: ±6 mbar from 300 to 1100 mbar
Accuracy @ 25℃: ±4 mbar from 700 to 1100 mbar
INPUT POWERVoltage: 2.8 VDC - 3.3 VDC
DIO DIGITAL INPUTSVinHighThreshold= 2.2 VMAX
VinLowThreshold= 0.3 VMIN
VinMAX= 30 VDC
DIO DIGITAL OUTPUTS2x Open Drain 100 mA max
VMAX= 30 VDC
ENVIRONMENTALOperating Temperature: -40 to 85℃ (-40 to 185℉)
Rating: IP67 when mated
Construction: Stainless Steel
Dimensions: 72 mm L x 15.9 mm OD (2.83” x 0.62”)
Dimensions: 73 mm L x 15.9 mm OD x 18.5 mm Panel Opening (2.83” x 0.62” x 0.72”)
GENERALAgency Approvals: CE, EMC 2014/30/EU, LVD 2014/35/EU
Compatibility: Compatible with OEG, SYNC configuration software, Layer N Cloud, and Modbus Networks
M12 8-Pin Wiring
|Pin 1||DIO 0||Discrete I/O Signal 0|
|Pin 2||INTR||Interrupt Signal|
|Pin 3||SCL||I2C Clock Signal|
|Pin 4||SDA||I2C Data Signal|
|Pin 5||Shield||Shield Ground|
|Pin 6||DIO 1||Discrete I/O Signal 1|
|Pin 7||GND||Power Ground|
|Pin 8||3.3VDD||Power Supply|
Layer N SP-003 / SP-004 Variants
|SP-003-1||Temperature, Humidity, Barometric Pressure Smart Probe with discrete I/O - Tube Housing|
|SP-004-1||Temperature and Humidity Smart Probe with discrete I/O - Tube Housing|
|SP-004-4||Temperature and Humidity Smart Probe with discrete I/O - Bulkhead Housing|
Layer N Smart Interface
Layer N Smart Probes require a Layer N Smart Interface to operate and connect to your Layer N Ecosystem
|IF-001||USB Smart Interface|
|IF-002||RS485/Modbus Smart Interface|
An optional M12 5-pin screw terminal adapter is available for users who wish to connect wire leads directly to the SP-014.
|M12.5-S-M-FM||M12 5-pin screw terminal adapter|
|M12.8-T-SPLIT||Smart Probe M12-8 pin shielded T-Splitter - enables access to I/O pins|
|M12.8-S-M-FM||M12-8 pin Straight Plug Field install connector with screw terminals|
|DM12CAB-8-1-RA||1m (3.3’) cable dual M12-8 connector, right angle terminator|
|DM12CAB-8-3-RA||3m (9.8’) cable dual M12-8 connector, right angle terminator|
|DM12CAB-8-5-RA||5m (16.4’) cable dual M12-8 connector, right angle terminator|
|DM12CAB-8-1||1m (3.3’) cable dual M12-8 straight connector|
|DM12CAB-8-3||3m (9.8’) cable dual M12-8 straight connector|
|DM12CAB-8-5||5m (16.4’) cable dual M12-8 straight connector|