text.skipToContent text.skipToNavigation
Leave a Message
1-888-826-6342 | 1-203-359-1660 (US & Canada)
ContactHelp
Order/Quote

If you have previously used the Omega Website, you will need to Reset your Password on the new site.
Resetting your password is required one time only.

Configure Product
Saved Configuration
View Configuration
Terms and Conditions
Saved Addresses
Something went wrong
Your card information was not accepted. Please contact the issuing bank for details.
Payment submission timed out. The server might be busy.
There was an error processing your request.
Please verify there are no missing or invalid fields.
Please enter a card number
Please select a card type
Please enter a value for this field
Please enter an expiry month
Please enter an expiry year
Please enter an issue number
Please enter a start month
Please enter a start year
The card number is not valid
The card type is not supported
The card verification code is not valid
The expiry month is not valid
The expiry year is not valid
The issue number is not valid
The start month is not valid
The start year is not valid
This field is required
Errors were found with the address you provided. Please verify your address.
Date should be in MM/DD/YYYY format
Please enter valid values
Please enter future date
Please enter the shipping date
Shipment date is updated
  1. Home
  2. Motion Control
  3. Motor Controls
  4. Starters
  5. NEMA Motor Starters
NEMA Motor Starters

NEMA Motor Starters

Item# N101BS0C3A

NEMA Motor Starters NEMA Motor Starters
The Cutler-Hammer® Electro-Mechanical Motor Starter consists of an electro-mechanical contact block or contactor and electromechanical solid-state overload relay as a full voltage non-reversing (FVNR) device. Size 00 to 2 motor starters are factory assembled.
N101BS0C3A
  • 24 Vdc Control Power: Safe, Reliable Global Standard
  • Unique Pulse Width Modulated (PWM) Coil Controller Minimizes Coil Power Consumption
  • Microprocessor-Based Control
  • Phase Loss and Current Unbalance Protection
  • Ambient Compensated Overload
  • Motor Temperature and Power-Up Protection with Thermal Memory
  • Easily Accessible Mounting Feet for Panel Mounting
  • LED Status Indication: Trip, Trip Class, Motor Thermal State, Reset, Overload State
  • Unique "Alarm Without Trip" Option for Critical Must Run Applications
  • -40 to 65°C (-40 to 149°F) Operating Temperature
  • Wide 3.2:1 Current Adjustment Range
  • Exclusive Internal 24-bit Floating Point Math Calculations with RMS Calibrated Current Measurement
  • Meets or Exceeds Global Standards for EMC (Electromagnetic Compatibility) Immunity and Emissions
  • IP20 Finger Protection
  • Motor Tuning Thermal Utilization Indication
  • Manual, Automatic or Remote Reset
  • DIN Rail Mountable, Size 00 to 2
  • Solid-State Alarm Output Indication
Data Sheet (PDF)
Shock/Vibration
Form Factor
Overload Adjustment Range
Quantity Price each
1-4 $504.00
5-9 $493.92
10-24 $483.84
25-49 $463.68
50-99 $458.64
100+ $453.60

In stock

Lead Time ( If not in Stock): 5 weeks
Add to Project List

Product Specs

  • Maximum Ambient Temperature 65 {C} (149 {F})
  • Maximum Ambient Humidity 95% RH
  • Maximum Coil Operating Voltage 28 Vdc
  • Maximum Storage Temperature 80 {C} (176 {F})
  • Mechanical Operating Rate (No Load) Size 00 and 0: 3/sec
  • Minimum Ambient Temperature -40 {C} (-40 {F})
  • Minimum Coil Operating Voltage 20 Vdc
  • Minimum Storage Temperature -50 {C} (-58 {F})
  • Mounting Hole Spacing Size 00 and 0: 33.8 W x 117.3 mm H (1.33 x 4.62")
  • Nomimal Coil Voltage 24 Vdc
  • Pull In Time - 24V, With Debounce Size 00 and 0: 75 mS
  • Pull In Time - 24V, No Debounce Size 00 and 0: 15 mS
  • Supply Voltage 24 Vdc
  • Insulation Voltage 690V
Product Details

The Cutler-Hammer® Electro-Mechanical Motor Starter consists of an electro-mechanical contact block or contactor and electromechanical solid-state overload relay as a full voltage non-reversing (FVNR) device. Size 00 to 2 motor starters are factory assembled.

en-US
en
Save Configuration