The F72C series has been discontinued. Please contact our Flow Engineering department for a viable replacement.
The F72C Coalescing Filters are designed for use as a single in-line unit or as part of Norgren's Excelon® modular compressed air preparation supply system. As a modular pneumatic component, this oil removing filter can quickly be attached to air regulators, filters, smooth start / exhaust valves, safety lockout valves and pipe adapters. With our Quickclamp® and Quickclamp® wall bracket accessories, a complete compressed air supply system can be assembled and mounted in minutes.
The F72C oil removing coalescing air filter is a highly efficient oil removing filter for compressed air systems. These filters come with a 0.01µm partical filter and a visual service life indicator which turns from green to red when the filter element needs to be replaced. Coalescing filters should be used in conjunction with a 5µm general purpose filter upstream to maximize filter element life and optimize performance. Combination 5µm general purpose filter and coalescent filter combination units are sold below for your convenience.
As a modular pneumatic component, this regulator can quickly be attached to filters, oilers, smooth start / exhaust valves, safety lockout valves and pipe adapters. With our Quickclamp® and Quickclamp® and wall bracket accessories, a complete compressed air supply system can be assembled and mounted in minutes. SPECIFICATIONS Fluid: Compressed air Maximum Pressure: Transparent Bowl: Manual or Semiautomatic Drain: 10 bar (150 psig) Automatic Drain: 8 bar (116 psig) Metal Bowl: Manual or Semiautomatic Drain: 17 bar (250 psig) Automatic Drain: 8 bar (116 psig) Operating Temperature*: Transparent Bowl: -34 to 50°C(-30 to 125°F) Metal Bowl: -34 to 65°C(-30 to 150°F) Particle Removal: 0.01 ìm
F72C MATERIALS Body: Zinc Transparent Bowl: Polycarbonate Guard for Transparent Bowl: Zinc Metal: Zinc Metal Bowl Liquid Level Indicator Lens: Transparent nylon Element: Synthetic fiber and polyurethane foam
Elastomers: Neoprene and nitril Service Life Indicator Materials- Body: Transparent nylon Internal Parts: Acetal Spring: Stainless steel Elastomers: Nitrile
F73C and F74C MATERIALS Body: Aluminum Transparent Bowl: Polycarbonate Transparent with Guard: Polycarbonate, steel guard Metal Bowl: Aluminum Metal Bowl Liquid Level Indicator Lens: Transparent nylon Element: Synthetic fiber and polyurethane foam Elastomers: Neoprene and nitrile Mechanical Service Indicator Materials Body: Transparent nylon Internal parts: Acetal Spring: Stainless steel Elastomers: Nitrile * Air supply must be dry enough to avoid ice formation at temperatures below 2°C (35°F).