text.skipToContent text.skipToNavigation

General Purpose Current I/P or Voltage E/P to Pressure Converter

0 to 5 Vdc, 3 to 15 psi


Item# EP211-X15-5V

Volume discounts available
Volume Discount Schedule
Quantity Price each
1-9 $349.87
10-24 $332.38
25-49 $325.38
50-99 $311.38
100-199 $304.39
200+ $297.39

In stock

Lead Time (If not in stock): 6 weeks
0 to 5 Vdc, 3 to 15 psi EP211-X15-5V EP211-X15-5V
  • Low Cost
  • Built-in Volume Booster
  • Small Size
  • Field Reversible
  • Low Air Consumption
  • Mounts at Any Angle
  • Convenient External Span and Zero Adjustment
    (Except for Explosion Proof Models)
  • Wide Supply Pressure Range
  • Low Supply Pressure Sensitivity
  • Loop Powered

EP211-X15-5V Model Options

View all models

Edit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.

*Highlighted options are not compatible. Please select a different combination.

Output Range
Input Signal
Pressure Port Type
Pressure Port Size

  • Operating Temp Range -29 to 60°C (-20.2 to 140°F)


The IP211/EP211 Series transducer is an electropneumatic device that reduces a supply pressure to a regulated output pressure directly proportional to an electrical input signal. The 211 Series accepts a wide range of supply pressures, ranging from a minimum of 3 psig (0.2 BAR) above the maximum output up to 100 psig (6.9 BAR). An integral pneumatic volume booster is included in the design to provide high flow capacity (up to 12 SCFM). Model selection includes General Purpose, FM Intrinsically Safe, and CSA Intrinsically Safe.

These transducers can be pipe, panel, or bracket mounted in any position. Positions other than verticle will require recalibration of the zero adjustment. For maximum output stability the transducers should be mounted in a vibration free location or such that vibration is isolated in the X and Z axis.

Field Reversible
All transducers are calibrated at the factory for direct acting operation but may be used in the reverse acting mode by reversing the polarity of the signal leads and recalibrating. When recalibrated for reverse acting applications, the transducers provide a minimum of their full rated output pressure (i.e.15, 27, or 30 psig) upon input signal failure.
loading all models
loading all reviews
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getReviews, 0ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
loading all QA
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
30 m (100') spool of 4 conductor wire
19 In Stock
Save Configuration