The FMG600 Series electromagnetic flow meters are designed for measurement of conductive liquids. The FMG600 magmeters have no moving parts and a PTFE lining, they can handle applications involving wastewater, pulp, food, and slurries. Standard outputs include analog, frequency, and RS485 communications. Optional sanitary tri-clamp mounting allows use of the FMG600 flow meters in applications not previously open to magmeters. Local- and remote-display models are available.
NOTE: HEAVY WEIGHT - NO UPS - MOTOR FREIGHT ONLY!!! OVERWEIGHT SHIPPING CHARGES WILL APPLY FOR THIS PRODUCT. IF ORDERED ON-LINE INTERNET SALES WILL CONTACT YOU AFTER ORDER PLACEMENT UNLESS YOU OPT TO CHARGE FREIGHT TO YOUR CARRIER ACCOUNT.
SPECIFICATIONS Flange Sizes: 150# ANSI: 19 to 305 mm (¾ to 12") Sanitary Tri-Clamp: 13 to 305 mm (½ to 12") Maximum Pressure: 145 psi Minimum Conductivity: 20 µS Electrode Material: Hastelloy C4 (standard), tantalum (TGE optional) Environmental Temperature: -5 to 55°C (23 to 131°F) Sensor Lining: PTFE Electronics Housing: Local or remote (optional) Liquid Temperature: 0 to 50°C (32 to 122°F) STD, 0 to 150°C (32 to 302°F) with remote electronics Empty Pipe Alarm: 2" and larger sizes (EPD optional) Accuracy: ±0.5% from 5 to 100% Qs, ±1% from 1 to 5% Qs Range: 0.1 to 10 m/s (0.328 to 32.81 fps) Outputs: Adjustable from 0.1 to 1000 gallons/pulse Current: 4 to 20 mA with galvanic isolation Frequency: 0 to 1000 Hz with galvanic isolation Communications: RS485 Power: 24 Vdc, 115/230 Vac switchable (optional) Consumption: 15 VA Protection: IP67 Storage Temperature and Humidity: -10 to 70°C (14 to 158°F) at max; relative humidity 70%