text.skipToContent text.skipToNavigation

If you have previously used the Omega Website, you will need to Reset your Password on the new site.
Resetting your password is required one time only.

Configure Product
Saved Configuration
View Configuration
Terms and Conditions
Saved Addresses
Your card information was not accepted. Please contact the issuing bank for details.
Payment submission timed out. The server might be busy.
There was an error processing your request.
Please verify there are no missing or invalid fields.
Please enter a card number
Please select a card type
Please enter a value for this field
Please enter an expiry month
Please enter an expiry year
Please enter an issue number
Please enter a start month
Please enter a start year
The card number is not valid
The card type is not supported
The card verification code is not valid
The expiry month is not valid
The expiry year is not valid
The issue number is not valid
The start month is not valid
The start year is not valid
This field is required
Errors were found with the address you provided. Please verify your address.
Date should be in MM/DD/YYYY format
Please enter valid values
Please enter future date
Please enter the shipping date
Shipment date is updated

Mass Flowmeters and Controllers With Or Without Integral Display

Item# FMA-A2100

Mass Flowmeters and Controllers With Or Without Integral Display Mass Flowmeters and Controllers With Or Without Integral Display

Description

The FMA-A2100/2200/2300/2400 Series Electronic Mass Flowmeters/ Controllers provide high performance, versatility and state-of-the-art design in one compact package. The FMA-A2100/ 2200/2300/2400 uses capillary-type thermal technology to directly measure mass flow of gases. No temperature, pressure, or square root corrections are required. The FMA-A2300/2400 Series comes with an LCD display, and all models come with linear 0-5 and 4-20 mA output.

The FMA-A2100/2200/2300/2400 measures the mass flowrate of gases in 24 ranges from 0-10 SCCM to 0-100 SLM. For the complete listing, refer to the range table below. The FMA-A2100/2200/ 2300/2400 Series is compatible with most noncorrosive gases. The user is advised to check the wetted materials against gas compatibility.

OMEGA’s Mass Flow Controllers use an internal electromagnetic proportional valve to control the mass flowrate. A command signal can be supplied either by the internal setpoint pot or by a 0-5 Vdc external source.
FMA-A2100
  • ±1% Accuracy
  • Linear Output
  • Low Cost
  • Thermal Technology
  • For Flow Rates up to 75 SLM
  • Power Supply Included
  • Comes standard with 5-point NIST cert
Flow Measuring Range
Accuracy Value
Retransmission/Analog Output
Housing Material
Flange Type
Display Type
Media Type
Features
See All Options
Quantity Price each
1-4 $654.68
5-9 $621.95
10-24 $608.85
25-49 $582.67
50-99 $569.57
100+ $556.48

In stock

Lead Time ( If not in Stock): 4 weeks

Product Specs

  • Accuracy Value ±1% of full scale including linearity
  • Connection Type 1/4 FNPT standard
  • Maximum Ambient Temperature 1/4 FNPT standard
  • Maximum Burst Pressure ±0.15% full scale or better
  • Maximum Operating Pressure 100:1
  • Measurement Units 50 {C} (122 {F})
  • Minimum Ambient Humidity 0.05% full scale per 1°C or better
  • Measurement Type Flow
  • Minimum Ambient Temperature 0 {C} (32 {F})
  • Minimum Pressure 5 seconds
  • Pressure Coeffcient 0.01% full scale per psi or better
  • Pulse Output Linear 0 to 5 Vdc
  • Response Time 5 seconds
  • Supply Voltage Meters: 24 Vdc @ 150 mA
  • Temperature Coefficient 0.05% full scale per 1°C or better
  • Wetted Materials Standard: Polyacetal
  • Turndown Ratio 100:1

Description

The FMA-A2100/2200/2300/2400 Series Electronic Mass Flowmeters/ Controllers provide high performance, versatility and state-of-the-art design in one compact package. The FMA-A2100/ 2200/2300/2400 uses capillary-type thermal technology to directly measure mass flow of gases. No temperature, pressure, or square root corrections are required. The FMA-A2300/2400 Series comes with an LCD display, and all models come with linear 0-5 and 4-20 mA output.

The FMA-A2100/2200/2300/2400 measures the mass flowrate of gases in 24 ranges from 0-10 SCCM to 0-100 SLM. For the complete listing, refer to the range table below. The FMA-A2100/2200/ 2300/2400 Series is compatible with most noncorrosive gases. The user is advised to check the wetted materials against gas compatibility.

OMEGA’s Mass Flow Controllers use an internal electromagnetic proportional valve to control the mass flowrate. A command signal can be supplied either by the internal setpoint pot or by a 0-5 Vdc external source.

en-US
en
Save Configuration