Turbine Flowmeters with Local Digital Display
Please add to cart to keep it or exit the configuration
- Both Rate and Total Indication
- Percent Reading Accuracy
- 6-Digit Display
- FM Approved (Standard unit only)
- Signal Output Capabilities
- Reads GPM or LPM (Field Selectable)
- Battery Operated
Edit OptionsView all models
Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
- Accuracy Value FTB-791: ±2% rdg
FTB790 Series turbine meters with microprocessor-based electronics offers a durable, compact, high-precision fluid measurement device, with total and rate indication. Information is clearly displayed on a large 6-digit liquid crystal display with only 2-point floating decimal for totals from 0.01 to 999,999. All operations are easily performed with only 2 buttons.
The basic unit and display are powered by 2 lithium batteries, providing up to 5 years of use. Cumulative total, batch total, and rate of flow are standard. A single-point field calibration curve can be stored in memory.
The turbine meter can also be ordered without display electronics. A special pulse output model (FLSC790-P-ND) must be ordered to obtain an open collector current sinking output operated on 9 to 35 Vdc. The output is a square wave pulse with a 3-wire connection.
Accessories for Turbine Meters With the Display:
The FLSC790-MA provides a 4 to 20 mA or 0 to 5 Vdc output for rate indication. The output module requires field calibration. The 4 to 20 mA dc is a 2-wire system requiring 8 to 30 Vdc power (24 Vdc recommended).
The FLSC790-P pulse output module provides an unscaled open collector sinking output operating on an applied voltage of 0 to 60 Vdc. The output is a square wave pulse with an amplitude the same as the supplied voltage.
The FLSC790-P-DC external power module for the FLSC790-P, allows for 9 to 30 Vdc external power for the pulse output. Internal batteries in the display can be used as an auxiliary power source.
The FLSC790-BATT is the replacement battery for the display electronics. Batteries provide 5 years of use.
The FLSC790-90D is a 90° mounting adaptor designed to allow displays to be mounted 90° from the standard position.
FTB-791: ±2% rdg
FTB-792, FTB-793: ±1.5% rdg
FTB-794, FTB-795: ±1.0% rdg
Pressure Rating: 1500 psig (103 bar)
With "-HP" option: 3000 psig (207 bar)
With Remote Electronics Kit: -40 to 121°C (-40 to 250°F)
Without Remote Electronics: -10° to 60°C (14 to 140°F)
Viscosity: Rated accuracy for fluids with viscosity of water (1 cSt); meters with display can be used for fluids up to 100 cSt with field calibration
Housing: 316 SS
Journal Bearings: Ceramic (96% alumina)
Shaft: Tungsten carbide
Rotor and Supports: PVDF
Retaining Rings: 316 SS
Display: 6-Digit LCD indicates flow rate, batch and cumulative total
Battery Life: 5 years
|Model No. |
|Model No. |
|Pressure Drop |
|Weight with Display |
|Optional Pulse Nominal |
|FTB791-ND||FTB791||1/2 FNPT||1 to 10 |
(3.8 to 37.9)
|8.0 psi||107 (4.2)||1.0 |
|FTB792-ND||FTB792||3/4 FNPT||2 to 20 |
(7.6 to 75.7)
|7.5 psi||109 (4.3)||1.1 |
|FTB793-ND||FTB793||1 FNPT||5 to 50 |
(18.9 to 190)
|5.0 psi||114 (4.5)||1.3 |
|FTB794-ND||FTB794||1-1/2 FNPT||10 to 100 |
(38 to 380)
|4.0 psi||135 (5.3)||2.1 |
|FTB795-ND||FTB795||2 FNPT||20 to 200 |
(76 to 760)
|10 (38)||4.0 psi||3.1 |