OMEGA’s LVCN318 ultrasonic level transmitter and controller provides continuous level measurement up to 5.5 m (18') with a 4 to 20 mA signal output, and is configured via our free software via a USB adaptor. The level sensor has 4 programmable relays with selectable hysteresis and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is widely selected for day tank, skid, IBC, sump and process tank level applications.
Specifications Range: 5.5 m (18') Accuracy: ±0.2% of range Resolution: 2 mm (0.079") Dead Band: 20 cm (8") Beam Width: 7.62 cm (3") Configuration: USB PC Windows® USB 2.0 Memory: Non-volatile. The level sensor is configurable via our free PC software and USB adaptor. The sensors are offered with and without USB connectors. Connectors can be used to configure any compatible level product. Download your free copy at: omega.com/ftp Supply Voltage: 24 Vdc (loop) Consumption: 0.5W Loop Resistance: 400Ù max Signal Output: 4 to 20 mA, two-wire Signal Invert: 4 to 20 mA or 20 to 4 mA Signal Fail-Safe: 4 mA, 20 mA, 21 mA, 22 mA or hold last Contact Type: (4) SPST relays Contact Rating: 60 VA, 1A maximum Contact Fail-Safe: Power loss; hold last Echo Loss: Open, close or hold last Hysteresis: Selectable Process Temperature: -7 to 60°C (20 to 140°F) Temp Comp: Automatic Ambient Temperature: -35 to 60°C (-31 to 140°F) Pressure: Maximum Working Pressure = 2 bar (30 psi) Enclosure Rating: Type 6P, encapsulated, corrosion resistant and submersible Encl Material: Polycarbonate Trans Material: PVDF Cable Jacket Material: Polyurethane Cable Type: 9-conductor, shielded Cable Length: 1.2 m (48") Process Mount: 2 NPT (2" G optional) Mount Gasket: FKM Classification: General purpose Compliance: CE, RoHS