text.skipToContent text.skipToNavigation

If you have previously used the Omega Website, you will need to Reset your Password on the new site.
Resetting your password is required one time only.

Configure Product
Saved Configuration
View Configuration
Terms and Conditions
Saved Addresses
Your card information was not accepted. Please contact the issuing bank for details.
Payment submission timed out. The server might be busy.
There was an error processing your request.
Please verify there are no missing or invalid fields.
Please enter a card number
Please select a card type
Please enter a value for this field
Please enter an expiry month
Please enter an expiry year
Please enter an issue number
Please enter a start month
Please enter a start year
The card number is not valid
The card type is not supported
The card verification code is not valid
The expiry month is not valid
The expiry year is not valid
The issue number is not valid
The start month is not valid
The start year is not valid
This field is required
Errors were found with the address you provided. Please verify your address.
Date should be in MM/DD/YYYY format
Please enter valid values
Please enter future date
Please enter the shipping date
Shipment date is updated

Advanced Digital Force or Torque Indicators with Remote Sensors

Item# DFG-RS5

Advanced Digital Force or Torque Indicators with Remote Sensors Advanced Digital Force or Torque Indicators with Remote Sensors
The DFG-RS5 is a high performance digital indicator that works with a wide variety of plug and play force and torque sensors. All calibration and configuration data is stored in the sensors smart connector instead of the indicator making the sensors truly interchangeable. In addition all of the remote sensors are also fully compatible with the DFG-RS3 basic force/torque indicators. A variety of interchangeable force and torque sensors are available for use with the DFG-RS3 series. Sensors are available in a range of capacities from 0.25 to 10,000 pounds force for load cells and 10 oz-in to 100 lb-in for torque sensors. In addition to the pre-calibrated sensors the DFG-RSA programmable adaptor allows the end user to calibrate most bridge type force or torque sensor with a 1 to 3 mV/V full scale output to work with the DFG-RS5. The DFG-RS5 also shares menu structure and most specifications with the DFG55 force gauges. It’s fast 7000 Hz sampling rate produces accurate results even for quick action tests. It also has an average mode that addresses the need to record the average load over time and an on board data memory for up to 1000 readings. A backlit graphic LCD displays large characters and a menu is available to access the gauges features and configurable parameters. Units also have a USB output for data collection and setpoint indicators for pass-fail testing.
DFG-RS5
  • Interchangeable Force and Torque Sensors
  • High Speed 7000 Hz Sampling Rate
  • Selectable Units of Measure
  • Load Cells Available in Ranges from 0.25 to 10,000 lb
  • Torque Sensors for 10 oz-in to 100 lb-in Ranges
  • Calibration Data Stored in Sensor
  • USB, RS232, Mitutoyo and Analog Outputs
  • Programmable Setpoints with Indicators and Outputs
  • Large Backlit Graphics Display
  • Live Load Bar Graph with Set Point Markers
  • Peak Readings and Set Points Always Displayed
Accuracy Value
 This item is available for quick shipping
Quantity Price each
1-4 $970.00
5-9 $921.50
10-24 $902.10
25-49 $863.30
50-99 $843.90
100+ $824.50

In stock

Lead Time ( If not in Stock): 3 weeks

Product Specs

  • Battery Life Up to 7 hours continuous use with backlight on or 24 hours with backlight off
  • Battery Type Rechargeable battery
  • Display Type Large Backlit Graphics Display
  • Maximum Ambient Humidity 96% non-condensing maximum
  • Maximum Ambient Temperature 38 {C} (100 {F})
  • Measurement Type Force
  • Measurement Units lb
  • Minimum Ambient Temperature 4{C} (40 {F}
  • Output Type USB/RS232 Output: Configurable to 115
  • Power Source Rechargeable battery or AC using adaptor (batteries and adaptor included)
  • Safe Overload 150% of full scale (200% for RLC03-025

The DFG-RS5 is a high performance digital indicator that works with a wide variety of plug and play force and torque sensors. All calibration and configuration data is stored in the sensors smart connector instead of the indicator making the sensors truly interchangeable. In addition all of the remote sensors are also fully compatible with the DFG-RS3 basic force/torque indicators. A variety of interchangeable force and torque sensors are available for use with the DFG-RS3 series. Sensors are available in a range of capacities from 0.25 to 10,000 pounds force for load cells and 10 oz-in to 100 lb-in for torque sensors. In addition to the pre-calibrated sensors the DFG-RSA programmable adaptor allows the end user to calibrate most bridge type force or torque sensor with a 1 to 3 mV/V full scale output to work with the DFG-RS5. The DFG-RS5 also shares menu structure and most specifications with the DFG55 force gauges. It’s fast 7000 Hz sampling rate produces accurate results even for quick action tests. It also has an average mode that addresses the need to record the average load over time and an on board data memory for up to 1000 readings. A backlit graphic LCD displays large characters and a menu is available to access the gauges features and configurable parameters. Units also have a USB output for data collection and setpoint indicators for pass-fail testing.

  • CE Icon CE

en-US
en
Save Configuration