text.skipToContent text.skipToNavigation

If you have previously used the Omega Website, you will need to Reset your Password on the new site.
Resetting your password is required one time only.

Configure Product
Saved Configuration
View Configuration
Terms and Conditions
Saved Addresses
Your card information was not accepted. Please contact the issuing bank for details.
Payment submission timed out. The server might be busy.
There was an error processing your request.
Please verify there are no missing or invalid fields.
Please enter a card number
Please select a card type
Please enter a value for this field
Please enter an expiry month
Please enter an expiry year
Please enter an issue number
Please enter a start month
Please enter a start year
The card number is not valid
The card type is not supported
The card verification code is not valid
The expiry month is not valid
The expiry year is not valid
The issue number is not valid
The start month is not valid
The start year is not valid
This field is required
Errors were found with the address you provided. Please verify your address.
Date should be in MM/DD/YYYY format
Please enter valid values
Please enter future date
Please enter the shipping date
Shipment date is updated

Rugged In-Line Rotary Torque Sensors with Integral Slip Ring Assembly

Item# TQ501-100

Rugged In-Line Rotary Torque Sensors with Integral Slip Ring Assembly Rugged In-Line Rotary Torque Sensors with Integral Slip Ring Assembly
The TQ501 rotary torque sensor is ideal for measuring torque in rotating shafts. An integral slip ring assembly is used to transfer the electrical signal from rotating to stationary electronics. The slip ring consists of silver graphite brushes which rub on the rotating ring, providing an electrical path for the incoming excitation and the outgoing signal voltage. The speed sensor is a magnetic pulse that generates 60 pusles per revolution. The DPF701 is the recommended meter for use with the RPM option.
TQ501-100
  • Ideal for Measuring Torque in Rotating Shafts
  • Clockwise or Counterclockwise Operation
  • Utilizes Proven Slip Ring Technology
  • Both Ends Double-Keyed for Easy Installation
  • Replaceable Slip Ring Brushes Available
  • Mating Connector Included
  • Optional RPM Sensor Available
Torque Range
Electrical Output
Features
Quantity Price each
1-4 $4,359.00
5-9 $4,271.82
10-24 $4,184.64
25-49 $4,010.28
50-99 $3,966.69
100+ $3,923.10

In stock

Lead Time ( If not in Stock): 12 weeks

Product Specs

  • Maximum Ambient Temperature 120 {C} (250 {F})
  • Maximum Compensation Temperature 77 {C} (170 {F})
  • Minimum Ambient Temperature -53 {C} (-65 {F})
  • Output Resistance 350 ±5 Ω
  • Minimum Compensation Temperature 0 {C} (32 {F})
  • Safe Overload 150% of Capacity
  • Retransmission/Analog Output 2 mV/V nominal
  • Zero Balance ±1.0% FS
  • Ultimate Overload 300% of Capacity

The TQ501 rotary torque sensor is ideal for measuring torque in rotating shafts. An integral slip ring assembly is used to transfer the electrical signal from rotating to stationary electronics. The slip ring consists of silver graphite brushes which rub on the rotating ring, providing an electrical path for the incoming excitation and the outgoing signal voltage. The speed sensor is a magnetic pulse that generates 60 pusles per revolution. The DPF701 is the recommended meter for use with the RPM option.

en-US
en
Save Configuration