text.skipToContent text.skipToNavigation

If you have previously used the Omega Website, you will need to Reset your Password on the new site.
Resetting your password is required one time only.

Configure Product
Saved Configuration
View Configuration
Terms and Conditions
Saved Addresses
Your card information was not accepted. Please contact the issuing bank for details.
Payment submission timed out. The server might be busy.
There was an error processing your request.
Please verify there are no missing or invalid fields.
Please enter a card number
Please select a card type
Please enter a value for this field
Please enter an expiry month
Please enter an expiry year
Please enter an issue number
Please enter a start month
Please enter a start year
The card number is not valid
The card type is not supported
The card verification code is not valid
The expiry month is not valid
The expiry year is not valid
The issue number is not valid
The start month is not valid
The start year is not valid
This field is required
Errors were found with the address you provided. Please verify your address.
Date should be in MM/DD/YYYY format
Please enter valid values
Please enter future date
Please enter the shipping date
Shipment date is updated

Industrial Accelerometer

Item# ACC102A

Industrial Accelerometer Industrial Accelerometer
The ACC102A accelerometer uses a shear mode design for high performance. It has a rugged stainless steel inner structure covered by a molded polymer. This construction makes the ACC102 impervious to harsh environments, such as alkaline coolants, hot oil and water sprays, resulting in long, reliable service. Additional features include high shock protection (to protect from dropping or mishandling), cross wire protection (protects against miswiring), and up to 1000 volt static discharge protection. The ACC102 has a high 100 mV/g output and measures across wide frequency and acceleration ranges. A low impedance cable allows for runs up to 1000 ft. The ACC102 exhibits the low noise floor and high amplitude linearity you’d expect in more expensive units.
ACC102A
  • Ideal for Harsh Environments
  • Hermetically Sealed
  • Superior Low Noise Floor for High Resolution
  • Rugged Strain Relief on Integral Cable
  • Fast Turn-on Time (1 Sec)
  • High EMI Noise Rejection
  • 100 mV/g Output
Output Type
Frequency Response
Acceleration Range
Sensitivity
Quantity Price each
1-4 $380.00
5-9 $361.00
10-24 $353.40
25-49 $338.20
50-99 $330.60
100+ $323.00

In stock

Lead Time ( If not in Stock): 22 weeks

Product Specs

  • Amplitude Non-linearity 1% up to 65 g peak
  • Base Strain Sensitivity 0.04 g/microstrain nominal
  • Connection Type 2.5 m (10') integral coaxial cable to BNCM
  • Form Factor 10-32 removable stud
  • Measurement Type Speed
  • Resonance Frequency 3 Hz to 5 kHz (up to 15% rated output shift)
  • Output Impedance 200 Ω nominal
  • Transverse Sensitivity 7% of axial max

The ACC102A accelerometer uses a shear mode design for high performance. It has a rugged stainless steel inner structure covered by a molded polymer. This construction makes the ACC102 impervious to harsh environments, such as alkaline coolants, hot oil and water sprays, resulting in long, reliable service. Additional features include high shock protection (to protect from dropping or mishandling), cross wire protection (protects against miswiring), and up to 1000 volt static discharge protection. The ACC102 has a high 100 mV/g output and measures across wide frequency and acceleration ranges. A low impedance cable allows for runs up to 1000 ft. The ACC102 exhibits the low noise floor and high amplitude linearity you’d expect in more expensive units.

en-US
en
Save Configuration