OMEGA’s PXM6000 Series Pressure Transducer fits easily into your application. This low cost transducer is small and light, and mounting requires no bulky structures. The sensor is a small, about 2.5 mm square, silicon chip with four diffused strain gauges, mounted in the stainless steel case. Laser trimmed resistors provide temperature compensation and adjust zero balance and span. The 4-20 mA output easily interfaces with most control and data acquisition systems The PXM6000 uses solid state media isolation for improved reliability. Thin films of chemically inert materials are deposited or grown on the chip surface to provide electrical isolation between the sensor and pressure medium. The sensor is less sensitive to vibration and more dependable in high shock environments because the films add no significant mass. Corrosion resistance is outstanding, and the isolation will remain effective because there is no gel or oil column to deteriorate.
The PXM6000 is also available in standard/Imperial configurations, with MS, NPT or UNF ports, and models from 0-15 to 0-300 psi pressure ranges. Please see the PX6000 for complete details, or contact our Pressure department for more information..
SPECIFICATIONS Excitation: 10 to 40 Vdc Unregulated Output: 4-20 mA Adjustable ±10% FSO Max Loop Resistance:50x(V-10) Ohms, where V = supply voltage (40 Vdc max) Zero Balance: 4 mA Adjustable ±10% FS Dielectric Isolation Resistance: 100 MOhms Mminimum at 45 Vdc Temperature Sensor: Resistance @ 24°C (75°F) 900 to 1500 Ohms Temperature Coefficient: 8% to 10%. per 55.6°C(100°F) Accuracy: ± 0.25% FSO for all ranges (Linearity, Hysteresis and Repeatability combined ) Operational Temp Range: -29° to 85°C (-20 ° to 185°F) Compensated Temp Range: -29° to 85°C (-20° to +185°F) Thermal Effects: Span: = ± 0.04% of FSO/°C Zero: = ± 0.04% of FSO/°C Vibration Sensitivity: At 20g peak sinusoidal vibration from 10 Hz to 2000 Hz ( 1 /2 " D.A.), the output shall not exceed 0.04% FSO/g for 1 bar range to 0.005% FSO/g for 7 bar and above Natural Frequency: Greater than 35 kHz for 7 bar and above Shock: 100g, 11 milliseconds half sine wave without damage Proof Pressure: 2.0 times rated pressure will not cause changes in performance beyond the specified tolerances Burst Pressure: 3.0 times rated pressure for pressure ranges below 14 bar, or 2.5 times rated pressure for pressure ranges above 14 bar will not cause rupture of the pressure sensor Wetted Parts: 316 Stainless Steel, Silicon, pyrex glass, epoxy, Kovar Electrical Connection: Style "0" = 0.6 m (2 ft) cable Style "1" = PT1H-10-6P connector Style "6" = micro DIN Connector Pressure Port: G 1/4 Male (std) Optional: G 1/4 Female, G 1/8 Male or Female Weight: 170 g (6 oz.) Mating Connector: Style "1" = PT06F10-6S (not inlcuded) Style "6" Micro DIN mating connector included
For special options consult Sales or Pressure Engineering.
Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.