text.skipToContent text.skipToNavigation

Thermally Conductive Epoxies and Thermally Conductive Grease

$15.16

Item# OB-101-2

 This item is available for quick shipping
Volume discounts available
Volume Discount Schedule
Quantity Price each
1-9 $15.16
10-24 $14.40
25-49 $14.10
50-99 $13.49
100-199 $13.19
200+ $12.89

In stock

Lead Time ( If not in Stock): 3 weeks

Thermally Conductive Epoxies and Thermally Conductive Grease OB-101-2 OB-101-2
Thermally Conductive Epoxies and Thermally Conductive Grease is rated 3.9 out of 5 by 13.
  • y_2020, m_8, d_8, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_en_US, sid_OB-101-2, prod, sort_[SortEntry(order=HELPFULNESS, direction=DESCENDING), SortEntry(order=POSITIVE_FEEDBACK, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_omega
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getAggregateRating, 2ms
  • REVIEWS, PRODUCT
  • Thermally Conductive
  • Electrical Insulator
  • Resist Oils, Solvents, Most Acids
  • OMEGABOND™ 100 Two Part Epoxy: Low Thermal Conductivity. Sets at Room Temp. Good to 130°C (265°F)
  • OMEGABOND™ 101Two Part Epoxy: High Thermal Conductivity. Sets at Room Temp. Good to 105°C(221°F)
  • OMEGABOND™ 200 Two Part Epoxy: Very High Thermal Conductivity. Sets in 2 Hrs at 205°C(400°F). Good to 260°C(500°F)
  • OMEGATHERM™ 201Silicone Paste: Extremely High Thermal Conductivity. Non-Adhesive. Does not Harden. Good from -40 to 200°C(-40 to 392°F

Edit Options

View all models

Not all combinations are valid. Options compatible with previous selections will be in bold.

*Highlighted options are not compatible. Please select a different combination.

Material
Volume
Max Temperature
Mix Ratio by Weight
Tensile Shear
Additional Option


Product Specs

OMEGABOND™ epoxy and OMEGATHERM™ thermal conducting paste are easy to use epoxies and silicone products. They are specially formulated for permanent bonding of thermocouples, thin film RTDs, thermistors and other temperature sensors, to most surfaces–metals, ceramics, glass, plastics, paper products. OMEGABOND™ and OMEGATHERM™ products are compounded and packaged for convenient, easy mixing and application. Each formulation exhibits important characteristics necessary for accurate, fast, reliable temperature measurement. These are: good adhesion and strength, high temperature rating, high thermal conduction, high electric insulation, thixotropic consistency, fast cure, and easy application.

OB-100 is available in 1/4 oz or 1 oz Twin Packs and 1 lb as 2 cans, 1 of resin and 1 of hardener.
OB-101 is available in 1/2 oz or 2 oz Twin Packs and 1 lb as 2 cans, 1 of resin and 1 of hardener.
OB-200 is available in a 2 oz Twin Packs or 1 lb as 2 cans, 1 of resin and 1 of hardener.
OT-201 is available in 1/2 oz or 2 oz Twin Packs or in cans as 1 lb or 2 lb (two 1 lb cans).

“Twin pak” packaging is supplied to ensure the user with accurate proportioning of resin and catalyst, as well as to provide a clean, fast means of mixing. The “Twin Pak” is a flexible, transparent plastic pouch, separated into two isolated compartments by means of a removable external divider. In one compartment is the resin, the other the pre-measured catalyst. To use, remove the divider, mix the two components by kneading the pouch, then snip off a corner to dispense. Each “Twin Pak” comes with an instruction sheet, enclosed in a clear, heat-sealed plastic envelope.

Please note that once mixed, the OB-100, OB-101 and OB-200 epoxies have the following "Working Times" (also referred to as "Pot Life"):
OB-100: Less Than 8 Minutes at Room Temperature
OB-101: Approximately 30 Minutes at Room Temperature
OB-200: Approximately 24 Hours at Room Temperature

Rated 4 out of 5 by from Formula changed! We use this epoxy weekly and have been buying it for many years. However, the last batch we purchased was a gel formula instead of the liquid we have become accustom to. Do no like it very much as it is difficult to fill a syringe and use it in the field.
Date published: 2015-12-04
Rated 5 out of 5 by from Used on automotive ECM's. I have used this for several years on automotive ECM's where SMD power transistors and switches are soldered to the PCB, which is then attached to an aluminum case for heat dissipation. This a requires a product with good thermal conductivity with a high dielectric rating. It has a very smooth and easy to spread consistency, and a good balance of pot life v.s. cure time.
Date published: 2020-07-14
Rated 5 out of 5 by from OmegaBond 101 is an excellent thermal epoxy OmegaBond 101 is our go-to thermal epoxy. It bonds well and hard. Excellent when we need to thermocouple a tiny component. Once it is on it stays on.
Date published: 2020-04-09
Rated 1 out of 5 by from Continusliy receiveing expired material Out of the last three orders placed and received, there is always epoxy packs that have expired material sent to us as noted by the expiration date on each pack. This I repeadily happening.
Date published: 2020-03-29
Rated 5 out of 5 by from Omegabond 101 I have been using OB-101 in the small packs for several years now to bond the printed circuit board to the frame/case, which as also the heat sink, on automotive Engine Control Modules manufactured with surface mount components. It withstands thermal expansion and contraction, and vibration, while also being a good thermal conductor and yet a good electrical insulator. Shelf life is substantially longer that what is marked on the packets.
Date published: 2019-04-15
Rated 3 out of 5 by from Great Product - Difficult to Apply We have been using this product for several years to fasten temperature sensors to the back of solar panels. It works great for the application, but it's difficult and extremely messy to apply. Because we are typically working upside down and in cramped spaces, it's extremely difficult to get the product in place without having it drip or get all over your hands. A better applicator for the smaller packages would be really helpful.
Date published: 2018-12-31
Rated 5 out of 5 by from Great product! Fast shipment! Great product! Fast shipment! Easy to use. I knew this product from other Engineer. I'd recommend this product to other Engineers too.
Date published: 2018-11-26
Rated 5 out of 5 by from Just what I needed This is a very thick thixotropic material, heat the pouch under a heat lamp for a bit to make it easier to mix and gently squeeze to dispense just where you want it. It must be heated to cure, even 48 hours at room temperature and its still pliable. A few hours at cure temperature its solid and bonds well to metals plastics and FR4.
Date published: 2017-07-12
  • y_2020, m_8, d_8, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_en_US, sid_OB-101-2, prod, sort_[SortEntry(order=HELPFULNESS, direction=DESCENDING), SortEntry(order=POSITIVE_FEEDBACK, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_omega
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getReviews, 0ms
  • REVIEWS, PRODUCT

I'm using OB-200. It really bonds well to any materials. It's also good at high T. But, my new application requires an epoxy having a low thermal conductivty. Do you have a product that has similar properties to OB-200, except for the high thermal conduc

Asked by: jskim
Hi jskim Please review OB-300. It is designed to be a potting , sealing compound where thermal conductivity is not needed. Best regards OMEGA
Answered by: AENorwalk3
Date published: 2020-06-26

Is there a solvent that we can use safely to remove OB-101? thanks

Asked by: Simon12345
Thank you for your inquiry. There are no solvents to remove this permanent epoxy. Material must be carefully scraped off surface.
Answered by: Application Engineer JB
Date published: 2020-05-18

What happens to grease if it is use at more than 500F?

Asked by: JorgeL2000
The upper rating is 392F for OT-201 and Omega does not recommend using it above that temperature. The characteristics can be altered and the material will no longer perform as specified.
Answered by: ANB ENG
Date published: 2020-05-11

Is Omegabond 101 UL Listed?

Asked by: cory o
Thank you for your inquiry. This product is not UL listed.
Answered by: Application Engineer JB
Date published: 2020-05-01

Can you recommend a filler / thickener for OB-200? I am looking to bond a stainless cooling tube to a stainless plate and the OB-200 is a bit too thin to get a nice fillet. Would Stainless steel powder be an acceptable filler for OB-200?

Asked by: Marco
Hi, Omega does not sell nor have we tested any thickening agents with the OB-200. If you need a cement with a bit thicker consistency you might want to look at a cement like the OB-600 as a possible substitute.
Answered by: Engineer9
Date published: 2020-01-29

What is the shelf life and optimal storage conditions for OB-101-1/2 packs? The standard 101 manual says 70F and one-year shelf life if container remains sealed. Just looking for clarity for the art packs.

Asked by: BillD
The environmental storage and shelf life is the same regardless of the amount being stored.
Answered by: Temperature
Date published: 2019-12-21

Is OMEGABOND 101 Two Part Epoxy good for potting electronics? How well does it handle thick layers and or voids between adhered surfaces? How thick/viscus is the epoxy as you work with it?

Asked by: spacer
OMEGABOND®100—a fast (8 to 12 minute setting time), room temperature, two-part epoxy. Recommended for easy temporary and permanent bonding of beaded wire and “cement-on” thermocouples. Adheres to metals, ceramics, epoxy laminates, glass, wood, concrete and many other materials—for temperature measurements up to 129°C (265°F). It is not recommended for those endeavoring to achieve the ultimate in precision and speed of response, since this unfilled system has a relatively low thermal conductivity.Temporary installation of beaded wire thermocouples can be achieved by using a very small amount of OMEGABOND® 100 to tack the bead to the surface and packing OMEGATHERM® 201 around the exposed surface to improve heat transfer. This clear syrup consistency—100% solid adhesive — contains no solvents and has good strength and electrical insulation characteristics. Note: The working time after mixing the 2-part system at room temperature is only 6 to 8 minutes. OMEGABOND 100 is available in “Twin Pak” packs and 1- and 2-pound kits. For larger gaps, up to 1/4", review the OB-400 High Temperature Air Set Cement.
Answered by: Temperature
Date published: 2019-10-12

Is OMEGABOND 201 Epoxy and OMEGATHERM 201 Silicone Paste safe for use in a vacuum? What about exposure to Oxygen?

Asked by: azucherman
The OmegaBond epoxy should be fine in a vacuum as long as it has been properly cured. The silicone paste OmegaTherm 201 however, does not harden and would not be the best choice to be used in a vacuum. Below I have attached a link that might help. https://br.omega.com/omegaFiles/temperature/pdf/OB-100_OB-200_OT-200.pdf In terms of its exposure to oxygen there is, unfortunately, no data available that can help me answer that. If you have any more questions please email us at temp@omega.com
Answered by: Jane
Date published: 2019-06-25
  • y_2020, m_8, d_8, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_OB-101-2, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_omega
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT

en-US
en
Save Configuration